POWTEX2023 International Powder Technology Exhibition Osaka 2023

As the name suggests, you can do CIP with just a desk and water!

- Compact and lightweight. Small installation space and portable. - High-performance hydraulic pump adopted. Smooth pressurization. Electric pump manufacturing is also possible. - High-performance pressure relief valve adopted. Adjustable pressure relief speed to prevent sudden depressurization.

• Powder Molding Machine

Small and medium-sized, easy CIP!!!!!!!! Perfect for first-time CIP!!!!!!!

The cold isostatic press machine CIP applies hydrostatic pressure uniformly and at high density by sealing powder in rubber molds and applying hydrostatic pressure in a pressure medium such as water. It can produce higher density and more uniform molded products compared to uniaxial pressing methods using molds. Medium-sized research and development "Power CIP" Machines for Φ50 and Φ80mm containers! Capable of applying pressure at 200MPa or 300MPa! If the molded products are small, multiple can be CIP processed simultaneously!! With an automatic opening and closing valve, pressure can be increased simply by pressing the pressure button! Compact research and development "Table CIP" Can be used on a desk! Can also be made in an electric pump type! As the person in charge at Ipros, I recommend the electric pump.

• Powder Molding Machine

Since it is a manual screw, it can be easily turned to achieve a maximum tightening force of 5,000N (500kgf), and load control in units of 100gf is also possible.

By including a heated plate (optional), it can also be used as a small heater press. With the built-in load cell, load management in units of 100gf is possible. We also accommodate other custom specifications. For more details, please download the catalog or contact us. Adhesive retention tests, powder molding, pressure tests, compression tests, and low-load long-duration pressure tests. Since it does not use oil pneumatic cylinders or motors, there are fewer consumable parts, allowing for long-term use! You can choose between an integrated display type and a separate display type. You can also choose between hydraulic load cells and electric load cells! As it is a made-to-order product, it can be manufactured in various custom types! Please consult us about the 20kN twist press as well.

• Powder Molding Machine

The most basic press machine. Molding, riveting, compression testing, outstanding versatility!

This is a tabletop small powder molding press for ceramics, metal powders, and the like. It features a high-performance high-pressure hydraulic pump that allows for smooth pressure increase. The manual pressure relief valve adjustment ensures smooth decompression. It is ideal for new ceramics and metal powders. For more details, please download the catalog or contact us. (If you only need a tabletop press for powder molding, we recommend the Mighty Press separately.)

• Powder Molding Machine

A groundbreaking natural biaxial molding press for powder molding of ceramics, metals, and other materials.

Application of Newton's Third Law of Motion "Action & Reaction." The drive methods available are manual pumps and electric pumps. Despite being a single cylinder, it can apply uniform load from both the top and bottom, allowing for easy molding of homogeneous products. There is no need to remove spacers for dual-axis molding. The mold inversion process for releasing the molded product is unnecessary. The remover is pressed from above to demold with the lower punch. We can accommodate special specifications such as dimensions, load capacity, and automation. For more details, please download the catalog or contact us.

• Powder Molding Machine

1/10000 of atmospheric pressure! Includes the machine's composition, the roles of each component, and standard machine specification sheets.

This document explains "vacuum freeze drying (freeze drying)" which sublimates frozen materials under vacuum. It includes the composition and roles of the machinery, vacuum blowers, and standard machine specifications. Our company not only manufactures vacuum freeze drying equipment but also designs, develops, and produces powder molding machines, grinders, mixers, etc., so we welcome any questions or consultations. 【Contents】 ■ What is freeze drying? (1) ■ What is freeze drying? (2) ■ Composition of the machinery and their respective roles ■ What is a vacuum blower? ■ Standard machine specifications *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

A simple explanation of various types of heat press machines used for various applications such as heating processing, lamination processing, thermal bonding, and sintering! *Materials available upon request.

This document provides a brief explanation of different types of heat presses. We introduce machines such as the "Heater Press," suitable for heated lamination processing and thermal bonding, and the "Hot Press," which can be used for pressure sintering and diffusion bonding, along with diagrams and photos. Please utilize this information for selecting machines used in heating processing, lamination processing, thermal bonding, and sintering. We look forward to your questions and inquiries. 【Exhibiting at the International Powder Technology Exhibition Osaka 2021】 Dates: October 13 (Wednesday) to 15 (Friday), 2021 Online Exhibition: September 29 (Wednesday) to November 12 (Friday), 2021 Opening Hours: 10:00 AM to 5:00 PM [Final day, October 15 (Friday), until 4:30 PM] Venue: Intex Osaka (Nanko) Halls 4 and 5 Booth Number: 4-U08 【Contents】 ■ Heater Press ■ WARM ISOSTATIC PRESS (Warm Water Laminator) ■ Hot Press *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum forming machine
• Other processing machines

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.