The product page for the 【Copper Bar Cutting Machine UCA-T250R】 has been updated with additional articles!

Added an automatic length-setting device with step feeding function to the copper strip cutting machine that achieves a beautiful cut surface without burrs!

The "UCA-T250 model" is a dedicated machine for high-speed and high-precision cutting of conductor materials such as copper strips and busbars at right angles. ✅ Cutting size: Compatible with copper bars of t15mm × width 200mm (equivalent to 4000AF) ✅ Beautiful cutting surface with a chip saw: Reduces the occurrence of burrs and edges, resulting in a very clean finish ✅ High-speed cutting performance: Capable of cutting t15mm copper bars at a feed rate of 30mm/second ✅ Space-saving design: The adoption of a spindle motor achieves a compact body, accommodating limited installation spaces ✅ Chip collection: Chips generated during cutting are collected in a pull-out dust box ✅ Automatic length setting device APKS3000-20R (optional): By adding an automatic length setting device with a step feed function, setup time is reduced, and high-precision positioning is made possible With this single machine, quality improvement and processing cost reduction can be achieved simultaneously. It is a reliable cutting solution that dramatically enhances productivity in copper processing environments.

• Plastic processing machines (cutting and rolling)
• Control Panel
• Other cutting tools

The circular saw can perform cutting operations safely and at high speed while being covered by a cover. It is a copper bar cutting machine that can accommodate heights of up to 15 mm and widths of up to 400 mm.

The "UCA-T400R model" is a dedicated machine for cutting conductor materials such as copper strips and busbars at high speed and with high precision. ✅ Cutting size: Compatible with copper bars of t15mm × maximum width of 400mm ✅ Beautiful cutting surface with a chip saw: Reduces the occurrence of burrs and edges, resulting in a very clean finish ✅ High-speed cutting performance: Capable of cutting t15mm copper bars at a feed rate of 30mm/second ✅ Space-saving design: Achieves compactness of the main unit by adopting a spindle motor, suitable for limited installation spaces ✅ Chip collection: Chips generated during cutting are collected in a pull-out dust box ✅ Automatic length setting device APKS3000-20R (optional): By adding an automatic length setting device with step feed functionality, setup time is reduced and high-precision positioning is made possible With this single machine, both quality improvement and processing cost reduction are achieved. It is a highly reliable cutting solution that dramatically enhances productivity in copper processing sites. ✅ An ultra-compact version (UCA-T250R) that supports cutting widths up to 250mm is also available! Please check the related page below for more information.

• Press Dies
• Plastic processing machines (cutting and rolling)
• Switchboard

Ideal for cutting copper busbars. The cut surface is also beautiful, and the discharge of chips is smooth.

"CuFine 355" is a high-performance saw blade specialized for cutting copper busbars and copper plates. It adopts a high-low blade type with excellent straightness, achieving smooth and stable cutting. The design minimizes workpiece pinching during cutting, ensuring the safety of the operator. Furthermore, by dividing the chips into three parts, it significantly improves chip removal, contributing to a clean and efficient working environment.

• aluminum
• cutter
• Other cutting tools

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Stable adhesion to rough and uneven surfaces such as stone, sheet metal, textured glass, and wood. Piab's "PX Suction Cup Series" is designed for handling rough surfaces, patterned surfaces, and uneven workpieces that are difficult to hold with standard flat suction cups. The high-conformity EPDM sealing ring adapts to the irregularities and shapes of the work surface, while the rigid aluminum support plate and internal support pad provide a stable grip. The internal support pad helps stabilize thin sheets and delicate workpieces while minimizing suction marks. It is suitable for demanding industrial applications involving stone, metal, glass, and wood. Additionally, a cone valve integrated version is also available. By preventing leaks from suction cups that do not contact the workpiece, it enhances safety during transport while reducing air consumption. This is also effective for energy-saving measures in large-area grippers that use multiple suction cups.