High quality, low cost, environmentally friendly Takubo painting robot.

This is a space-saving painting robot system that has been developed specifically for painting, with all the necessary equipment for painting completed in one unit and designed to be suspended from the ceiling.

◆Key Features 1) Numerical management painting system 2) Significant reduction in paint usage 3) Reduction in defect rates 4) Easy color matching 5) Easy cleaning and color change 6) Good operability, suitable for any operator 7) Small installation space 8) Low overall energy consumption *) No technicians required

• Other painting machines

Achieving high-quality coating and reduction of paint consumption.

Mass production-compatible coating system for producing three coats on mobile phone bodies.

• Articulated Robot
• Other painting machines

Suitable for reducing painting costs of mobile phone painting systems!

■Example: Paint consumption - approximately 1g (per mobile phone piece) ■Color matching / color change time - approximately 2 to 3 minutes ■Color reproducibility - hue stability ■Film thickness control - freely adjustable from 3 to 30μ ■Production capacity - approximately 60 pieces ■Networking - N/DACS compatible ■Teaching-less - dedicated keitai-PACK ■High-efficiency painting - dedicated jig development

• Other painting machines

A single painting robot can produce up to 3 coats.

This product is a painting system that enables the production of three coats for a mobile phone body using a single robot, accommodating small-batch and diverse production. From equipment for maintaining quality, such as measures against waste defects, to robots/systems that achieve high quality, we focus intensively on specialization. Furthermore, we have introduced the rotating painting technology R, which realizes high-quality ultra-gloss coatings, achieving a high level of digital painting. 【Lineup】 ■ Mobile Phone 1R3C ■ Mobile Phone 3R3C ■ Smartphone 3R3C - Case - 1 *For more details, please refer to the PDF materials or feel free to contact us.

• Articulated Robot
• Other painting machines

Dedicated coating system for vehicle wheels

A dedicated painting system for vehicle wheels that incorporates Takubo Engineering Co., Ltd.'s painting robot system "SOFTBOY PRO" and the newly developed IH induction heating drying system "JURO."

• Articulated Robot
• Painting Machine
• Other surface treatment equipment

Reduce the painting cost of door mirrors and achieve high quality. Dedicated painting robot system.

A door mirror painting system standardized by painting technology cultivated through mobile phone coating and the latest system technology. This technology addresses three themes simultaneously: quality, cost, and environmental considerations, by reducing paint consumption, enhancing quality through thin-film multi-coating, and being environmentally friendly. It also resolves quality variations between scattered factories through high-level data compatibility.

• Articulated Robot
• Other painting machines

Standard system for super spindle coating.

The "SUPER SPINDLE 300C" is a completely new painting system developed as a painting robot system specifically for mobile phones and mobile communication devices. Information such as spray pressure, atomization pressure, and pattern pressure settings can be configured on a computer monitor within the controller. The compact and simple design, in conjunction with the paint supply system, allows for quick and easy cleaning operations. Automation significantly improves work efficiency and work environment, while also greatly reducing industrial waste costs. 【Differences from General Spindle Systems】 ■ Capable of saving painting data ■ Easy color change setup ■ Spray method using an overhead robot system ■ Collaboration between the robot system and oil booth, sludge recovery device ■ Workpieces are attached to a circular dedicated jig, allowing for painting in both forward and reverse rotation with the jig *For more details, please refer to the PDF document or feel free to contact us.

• Articulated Robot
• Other painting machines

Dedicated for creating painting data

"Data Pro" is a painting robot system that manages coatings, paint films, and paints, creates an optimal environment, and supplies consistent quality at low cost. It solves the waste of costs associated with running the line for condition setting. It enables advanced offline teaching and visualization and management of paint usage and painting time. Additionally, if you use Takubo's robot series, you can transfer data to painting lines located around the world, install it on the painting line's robot, and reproduce it with simple adjustments such as teaching and fixtures. [Features] ■ Compatibility of data ■ Elimination of quality differences between factories ■ Production with stable quality ■ Support for global strategies and globalization ■ Realization of world-standard quality *For more details, please refer to the PDF materials or feel free to contact us.

• Articulated Robot
• Painting Machine
• Other painting machines

Small-sized painting robot in SS size dedicated to inner illumination buttons, switches, and small item work.

As an evolved version of the previous generation small SS-type robot, it makes a new appearance with a sharp design. It demonstrates its power in laser-cutting paint. It adopts the technology of rotational coating R, which excels in film formation performance. It is compatible with everything from mobile communication devices to automotive interior and exterior parts.

• Articulated Robot

Achieving mass production of multiple varieties, addressing environmental issues, and reducing overall energy costs.

A completely new painting system developed as a dedicated painting robot system for mobile phones and mobile communication devices.

• Other machine elements
• Articulated Robot
• Painting Machine

Space-saving type oriented towards automation, which can also be integrated into automated lines.

Batch or automatic dual-compatible painting system

• Articulated Robot
• Other painting machines

Support for mass production from small quantities and diverse varieties.

A standard type that can be selected according to production volume and production layout.

• Articulated Robot
• Other painting machines

Dedicated Robot System for Paint Data Creation

Quantifying the information necessary for painting. A dedicated robot for pre-production conditions such as film thickness, quality, painting time, and paint consumption. It is suitable for purposes other than mass production, such as education, sampling, and research.

• valve
• Articulated Robot
• Painting Machine

●Equipped with the specifications necessary for data creation ●Developed specifically for creating painting data ⇒ Enables production that maximizes quality and cost efficiency

- Acts as a key station for painting and allows the transferred data to be compatible with the same Softboy Pro series. - Faithfully reproduces data and supports the globalization of painting. - Enables numerical management of paint consumption, painting time, painting conditions, and more. - Also adapts to the traceability of painting and serves as an educational tool for robot operators, contributing to the improvement of painting technology levels.

• Painting Machine
• Other surface treatment equipment

One machine, three roles. 3-court compatible door mirror painting robot.

One robot can flexibly produce on three coats! Paint consumption can be reduced by approximately 50%! Significant reduction in air conditioning energy costs! By significantly reducing painting costs, we can establish a simple painting line. It is strong in color changes and setup changes, and it promotes the reduction of painting costs by greatly decreasing paint usage.

• Other industrial robots

Newly developed high-capacity painting robot line dancer.

A single robotic arm can be equipped with up to 12 spray guns.

• Other surface treatment equipment

New standards for mobile phone coating: Cost visibility!

<Production Simulation> ●Cost comparison for 2-coat (standard) production at 2,000,000 pcs/month ○When using Super Spindle Model C140-6PJ 　1. Paint usage... 3,320 kg 　2. Paint cost... 5,976,000 yen ○Conventional spindle painting 　1. Paint usage... 7,200 kg 　2. Paint cost... 12,960,000 yen

• Articulated Robot

Significant reduction in painting costs. Minimizing unnecessary paint consumption and saving thermal energy.

The wheel painting system has entered the 1/4 era! ○ High-speed short drying ○ Equipment miniaturization ○ CO2 reduction Comparison of drying times in aluminum wheel painting ○ Conventional gas hot air drying system... Hot air drying at 140°C, 75 minutes ○ Juro drying system... Juro at 180°C, 15 minutes

• Other machine elements
• Transport and handling robots
• Painting Machine

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.