Introducing "Plastex Lok," which is helpful in preventing falls.

The most common workplace accident in the country is slipping and falling! The causes vary, including dust and liquids. Solve the problem with Plastex Lok, which is resistant to both dust and liquids!

In 2020, the most common type of injury accident reported by the Ministry of Health, Labour and Welfare was falls. Approximately 30,000 workers are affected annually, which translates to about 86 injured or deceased individuals per day. Plastex Lok features countless protrusions processed to be slip-resistant on the surface, helping to prevent falls for workers. Additionally, its high drainage performance and interlocking tile mat design allow for easy installation and flexible layout changes. ■Recommended Work Sites - Areas where large amounts of liquids or dust are spilled - Workstations, assembly lines, laboratories, engine manufacturing, thin sheet processing

• Brush
• Industrial Vacuum Cleaners
• Safety shoes and sneakers

Heat-resistant, oil-resistant, and insulating materials! Mats effective for reducing fatigue during standing work and improving safety.

The "Floor Mat Comprehensive Catalog" is a catalog that addresses all needs, including mats that enhance safety and mats that reduce fatigue during standing work. Additionally, it includes mats suitable for floor protection, maintenance, vibration and sound insulation, as well as use in bathrooms and pools. There are also products that can accommodate special applications using anti-static materials, insulating materials, and heat-resistant materials, making them suitable for use in research facilities. [Contents] ■ Fatigue-reducing mats ■ Slip-resistant mats ■ Floor protection and maintenance mats ■ Vibration and sound insulation mats ■ Mats for bathrooms and pools *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products
• mat

We would like to introduce our products that received a 2021 evaluation, ranging from improvements in waste oil storage areas to reductions in laceration accidents.

1st Place: Rigid Lock Quick Balm As a portable oil pan, it has received positive feedback from all customers who purchased it. Unlike traditional iron oil pans or pits that were difficult to move, this can be easily relocated by one person. 2nd Place: Pig Tough Chat Green A standard solution for oil management around machinery, the Pig Tough Chat Green features a durable surface that excels in abrasion resistance, capturing oil from shoe soles and the floor. The green surface, matching safety walkways, is printed with "Safety First" and a cute pig illustration to alert workers. 3rd Place: Pro Mat Anti-Slip Type An anti-slip mat ideal for preventing slips on wet floors, such as those caused by rain. It has excellent water absorption, and the anti-slip coating on the underside does not use adhesive, making installation and removal easy. 4th Place: SecuMax 350 A safety cutter made in Germany, famous for its blades. Its unique shape prevents fingers from touching the blade, yet it offers exceptional cutting performance. The lineup includes products designed for metal detection, which are popular among customers in food factories with frequent unpacking tasks.

• cutter
• Wipers
• Other safety and hygiene products

This is a revolutionary cushion mat that combines anti-static and fatigue-reducing effects. It is also effective for cold protection!

The electrically conductive deck plate is an anti-static cushion mat treated to prevent static electricity. It quickly dissipates static electricity from the operator, protecting products and equipment from static-related issues. With a thickness of 14mm, it also offers excellent cushioning! It can be used to alleviate fatigue from standing work and to combat cold feet. *For product details, refer to the Floor Mat Comprehensive Catalog, P.32. 【Features】 ■ Anti-static This conductive mat has a resistance value of 10⁷Ω, allowing for quick dissipation of static electricity. ■ Fatigue reduction effect It alleviates tension in the legs, waist, and back during standing work, providing a comfortable environment to focus on tasks. ■ Durability The hard surface is highly durable, making it suitable for areas with heavy foot traffic or where workers wear safety shoes. ■ Slip prevention The surface has a ribbed pattern that helps prevent slipping. ■ Trip prevention For safety, the edges are sloped. ■ Flame retardant compliant It has passed the flame retardant performance verification test set by the Japan Flame Retardant Association.

• Other consumables

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

When it rains, problems at construction sites such as muddy access roads, rough ground conditions, and reduced mobility of heavy machinery and vehicles increase significantly. One solution that can be utilized even in rainy conditions is the wooden lightweight mat "Hyper CLT Mat," made from CLT (Cross Laminated Timber). By laying it down on temporary roads, access routes, heavy machinery work yards, and material storage areas, it reduces the area where vehicles run directly on the ground, serving as a countermeasure against mud and muck. The 5×10 panel weighs about 230 kg, making it relatively light and easy to install, remove, or relocate in accordance with the progress of construction. Furthermore, it can be proposed for use in public works as a new technology registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." The wooden lightweight mat, combining wood, NETIS, civil engineering, and CLT, is an option that supports the footing of sites where conditions can change easily due to weather.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.