We will be exhibiting at the "Light and Laser Science and Technology Fair 2023."

A wide range of applications from plasma monitoring to pharmaceutical analysis. Excellent thermal stability allows for adaptation to changes in the measurement environment.

● Supports a wide wavelength range of 190-1150 nm (dependent on the grating) ● Resolution and throughput can be adjusted according to your requirements ● Achieves high-speed measurements with a minimum exposure time of 1 µs ● High S/N ratio (380:1) allows for lower noise and higher precision measurements compared to conventional standard types Demo units are available for loan! Please feel free to contact us through the inquiry form! 【For customers using Ocean Optics products】 The following products have been discontinued: HR2000/HR4000/MAYA2000PRO We are currently providing guidance with this product.

• Spectroscopic Analysis Equipment

[Demo unit available] Compact spectrometer with excellent sensitivity in the ultraviolet range.

The Ocean ST is a spectrometer that achieves an ultra-compact size comparable to a golf ball while featuring excellent UV response (185-650 nm), high-speed spectral acquisition, and a high signal-to-noise ratio performance. Despite its small and lightweight design, it enables complete spectral analysis with performance comparable to large and expensive spectrometers. The Ocean ST is ideal not only for everyday lab use but also for integration into devices or setups with limited space. It accommodates a wide range of applications, from measuring DNA absorbance to evaluating laser characteristics. If you would like to request a demo unit for evaluation, please feel free to contact us through the inquiry form!

• Spectroscopic Analysis Equipment

New standard model spectrometer from Ocean Optics.

The Ocean SR spectrometer from Ocean Insight is a versatile spectrometer that achieves high-speed spectral acquisition and top-class S/N performance. It is ideal for applications such as laser characterization, plasma monitoring, and DNA/RNA absorbance measurements, combining high speed (minimum exposure time of 10μs) with excellent S/N (380:1). It realizes application diversity without the trade-offs seen in other compact spectrometers. 【Product Details】 Modular - Configurable to suit applications and needs across a wavelength range of 185-1100nm Compatibility - Operates with Ocean Insight light sources, accessories, and software User-replaceable slit - Allows changes to the spectrometer's resolution and throughput as needed Compact and lightweight - 89.0 mm x 63.5 mm x 31.3 mm, 275 g 【Main Applications】 Laser characterization Plasma monitoring DNA/RNA absorbance measurements For more details, please refer to the catalog or contact us. Demo units are also available.

• Spectroscopic Analysis Equipment

The sensitivity has increased by 2.5 times compared to the previous model!

NIRQuest+ is the next-generation near-infrared spectrometer model from Ocean Insight. The NIRQuest+ series has improved the design of the optical bench, achieving approximately 2.5 times higher sensitivity compared to the previous model. It is suitable for applications such as moisture content in fruit sorting, plastic recycling, and chemical concentration measurement, and can be used not only in laboratories but also for samples flowing on a conveyor line, for example. Demo units are available for loan sequentially. We encourage you to take this opportunity to evaluate it. For more details, please refer to the catalog or contact us.

• Spectroscopic Analysis Equipment

Achieving a very uniform light flux density over a large area! LED for UV DLP applications.

The LumiDL Illuminator achieves unprecedented speed and resolution for ultraviolet DLP applications by having a very uniform light flux density over a large area. The patented modular device combines a densely arranged UV LED array with a non-imaging collection optical system optimized for DLP chipsets. It is sold as a kit that includes the optical module and driver, allowing for quick and easy replacement of the light engine without the need for readjustment or alignment.

• LED Module

LEDs ideal for fiber optic applications in industry, healthcare, and experimental equipment.

LumiFiber is ideal for fiber optic applications in industrial, medical, and experimental devices. This coupler incorporates the company's LumiBright light engine, which features interfaces for light guides and fiber bundles. It provides a compact, homogeneous, and robust light source, with up to 25W of ultraviolet, visible, and near-infrared light, making it perfect for use in high-performance endoscopes and borescopes.

• LED Module

A UV-compatible luminous flux measurement system that covers small lamps to large lamps.

VisoSystems' LabSpion is a photometric measurement system that covers a wide range of light sources, from small lamps and LED chips to large panels and streetlights. To meet the increasing demand for the UV-C range, it is capable of measuring from 200nm and above. With a 2-axis goniometer, it can measure the photometric distribution of a wide variety of light sources. It provides LDT and IES files for lighting design. Thanks to its unique technology, it enables light flux measurement using a spectral sensor and an integrated power analyzer, allowing for rapid measurement of all data. Additionally, LabSpion can be upgraded to "LabSensor UV-VIS" as an option. LabSensor UV-VIS can measure 3D photometric and color measurements of visible and UV light simultaneously. Users can enhance the efficiency of UV disinfection and curing by understanding the photometric characteristics of UV radiation. For more details, please download the catalog or contact us.

• Optical Measuring Instruments

Electron beam lithography equipment, EUV exposure equipment, nanoimprint lithography applications. Two types available: powder and solution!

AQM's H-SiOx is a negative-type resist available in both powder and solution forms. It offers performance comparable to Dow XR-154 and FOX. Each form has its own characteristics. 【Powder】 Long-term storage possible: Can be stored for up to one year, allowing for gradual use over an extended period. Immediate availability: Can be obtained quickly when needed. Consistent viscosity: Does not thicken as it is mixed before use. Adjustable concentration: Capable of creating a wide range of film thicknesses tailored to applications. Highest level of line width: Achieves a line width of 7nm. 【Liquid】 Available for purchase in small quantities: Can be tailored to the required amount. Short delivery time: Delivery can be made within one month after order. Made to order: Can be delivered with a longer shelf life. Highest level of line width: Achieves a line width of 7nm. For inquiries, please contact our representative, Kitano.

• Resist Device

Nanocrystals that absorb a wide range of light and emit light at specific wavelengths.

Quantum dots (nanocrystals) are nanoscale materials that can absorb a wide range of light and emit light at specific wavelengths, making them highly regarded for applications such as solar power systems, displays, LEDs, lasers, medical labeling, and diagnostic methods.

• Fine Ceramics
• Organic Natural Materials
• others

For basic research and development prototypes! Mixing quantum dots and resin for coating applications.

Quantum dot coating agents are the latest products that mix acrylic UV-curable resins/silicone resins with quantum dots used in LEDs, lighting, displays, biomedical applications, and solar power generation. By applying special treatment before mixing with UV-curable resins, it becomes easier to conduct fundamental research and development prototypes that were previously difficult. The resin used has low viscosity and can cure with ultraviolet light, making it primarily suitable for coating applications. [Key Points for Selection] ● This product allows for the easy formation of a quantum dot coating layer. ● Ideal for fundamental research, development, and prototyping applications. ● Excellent stability against temperature and UV.

• others

The latest published paper utilized Abby. This will be an online seminar featuring Associate Professor Yosuke Katsuta from the Graduate School of Advanced Science and Technology, Kumamoto University, who is also a co-founder of StapleBio. He is working on RNA hacking technology development aimed at altering the higher-order structure of target mRNA using short nucleic acids named Staple nucleic acids, with the goal of controlling gene expression. He will present the latest data focusing on the results of cell experiments and animal experiments in the development of this technology. Related paper on the lecture content: "Staple oligomers induce a stable RNA G-quadruplex structure for protein translation inhibition in therapeutics" | Nature Biomedical Engineering

[Speaker] Yoshirō Tsuruhara, Representative of Auto Insight Inc. / Technology Journalist and Editor [Key Lecture Content] The global automotive industry is undergoing significant upheaval. The term "CAST," which is bringing about even greater changes than the previously used keyword "CASE," is at the forefront. It stands for four elements: "China," which has begun to lead global automotive technology; "AI" (Artificial Intelligence), which is transforming the development process; "SDV" (Software Defined Vehicle), which is revolutionizing the creation of vehicle value; and "Trump," which is altering the rules of the world. What does the future of the automotive industry look like with CAST? [Lecture Items] 1. Current state of the automotive industry 2. The keyword "CAST" symbolizing transformation and its meaning 3. How China is dismantling the old order of the automotive industry 4. Generative AI infiltrating all development processes 5. How SDV is transforming "value creation" in the automotive industry 6. How the second Trump administration will change the rules of the global automotive industry 7. Changes in how the automotive industry generates revenue 8. Q&A

[Lecture Items] 1. Energy-saving Project for Data Centers National Research and Development Agency New Energy and Industrial Technology Development Organization Next Generation Green Data Center Technology Development Project Project Manager Toshiyuki Ando 1. About NEDO 2. Overview of the Next Generation Green Data Center Technology Development Project 3. Future of Data Centers 4. Elements Necessary for Energy Saving 5. Overview of Research and Development 6. Q&A / Business Card Exchange 2. Technology Trends of GaN Power Devices Expected to Contribute to Energy Saving in Data Centers and Other Industrial Applications Professor Noriyuki Iwamuro, Tsukuba University, Mathematical and Physical Sciences 1. Current and Future of the Power Device Market 2. Key Points in Power Device Development 3. Technologies Supporting the Latest Silicon MOSFETs 4. Why GaN Devices for Data Centers 5. Latest Technologies of GaN Power Devices 6. Differentiation Between GaN and SiC Power Devices 7. Q&A / Business Card Exchange

This is an announcement for a seminar hosted by our group company, Jemco Japan Management Co., Ltd. ■ Theme: "Mastering 'DX that Can Be Used on the Ground'! Business Reform in Management and Indirect Departments Utilizing DX" ■ Date and Time: November 12, 2025 (Wednesday) 14:00–15:00 ■ Format: ZOOM Webinar 【Seminar Content】 1. The 2030 Problem and Productivity Challenges in Management Departments 2. An Overview of Business Reform Utilizing Digital Technology 3. Automation of Routine Tasks with RPA (Power Automate) 4. Knowledge Search and Document Utilization with Generative AI × RAG 5. Implementation Examples of "Small-Scale DX" with Power Apps 6. Development of DX Talent and Internal Deployment Models If you wish to participate in the seminar, please apply using the URL below. (You will be redirected to the group company's site) *Please apply early as the registration will close once capacity is reached. https://www.jemco.co.jp/seminar/20251112dx/?lfpeid=kqbONicaYDDx&lfmaid=1000360919-5

At our booth, we will propose products that enable "improved production efficiency" and "cost reduction" through the stabilization of plastic molding. In particular, for recycled plastics, which have been gaining importance recently, the representatives of each device will explain the test results verified with demo machines conducted in-house. We will have a demo unit of the polymer moisture meter "AquaTrack V," and customers who bring samples will be able to conduct actual measurements. Larger samples, such as preforms, can also be measured as they are. *Please inquire in advance about the types of samples. Additionally, we will present a booklet titled "Dr. Plastic Molding's Rheology Lecture Notes," summarizing the understanding of material properties and predictions of viscosity and flowability, to those we speak with at the booth. We sincerely look forward to your visit. ◎ Exhibition Contents - Polymer moisture meter "AquaTrack V" (actual machine on display; demo measurements available) - Ultra-compact polymer dehumidifying dryer "Card Series" (full-size mock-up on display) - Capillary rheometer "R6000" (panel on display)