We have released a video capturing the atmosphere of our booth at the Okayama Technology Exhibition (OTEX) 2023.

Thank you for visiting the Okayama Technology Exhibition (OTEX) 2023. You can view the catalog of the exhibited products.

Thank you to everyone who visited our booth at the "Okayama Technology Exhibition (OTEX) 2023" held at Convex Okayama from November 7 (Tuesday) to 8 (Wednesday), 2023. In response to requests such as "I want to take a closer look at the exhibits again" and "I want to see the related catalogs and panels up close," we are now making available the product catalogs and display panels introduced at the Takaya booth. Please take a look.

• Circuit Board Inspection Equipment

Top class in industry share!! "Takaya," the company that gathers trust and support from around the world for its circuit board inspection equipment.

The "electronic circuit board" is one of the important components widely used in various fields as a fundamental part for controlling electronic devices. The "board inspection equipment" developed by the Industrial Equipment Division is an "in-circuit tester" designed to inspect whether all components function correctly and whether there are any installation defects after various electronic components have been mounted on this "electronic circuit board" (ICT: In-Circuit Test). Among these, the "flying probe tester," which uses a needle called a "probe" that is rapidly moved by a robotic arm to directly contact the electronic components on the board for inspection, is a flagship product developed by Takaya ahead of the world. This device enables the quick detection of various defects that occur during manufacturing. Additionally, it allows for rapid adaptation to a wide range of boards through program changes. It has established an indispensable and solid position in modern manufacturing, which is characterized by small-batch production of diverse products.

• Circuit Board Inspection Equipment

RFID technology enhances the value of diverse business models even further. It is active across a wide range of industrial fields, from security to factory automation and logistics.

The core business of the RF Division is the development, manufacturing, and sales of products that use radio frequency. Since 1996, we have developed various products including radio wave-based store security gates, 2.45GHz RFID readers/writers, and 13.56MHz RFID readers/writers, with Takaya products actively used across a wide range of industries from security to factory automation and logistics. We not only offer our own planned products but also provide OEM/ODM supply, contract development, EMS services, and system solutions, contributing to the creation of added value in diverse business models.

• IC tag

Providing custom security solutions for various industries and businesses. One-stop support from infrastructure assistance to software development.

The core business of the Solutions Division is IT services for enterprises. By effectively utilizing the experience, know-how, and personnel that the Takaya Group has cultivated through various system developments, along with the latest IT technologies, we provide optimal solutions to the IT challenges faced by our customers. For example, our highly skilled system engineers respond to the diverse needs of customers with systems such as RFID process management systems, attendance management systems, access control systems, warehouse management systems, and parts management systems. Utilizing advanced research, analysis, and design capabilities, we propose and build optimal systems ranging from infrastructure support such as server implementation and network construction to software development, maintenance, and operation, providing one-stop IT solutions.

• Process Control System

Supporting cutting-edge technology in the digital network era, responding to industry-specific needs with "high quality," "short delivery times," and "low costs."

The advancements in technology in the field of communication imaging show no signs of stopping. The new digital network market is rapidly expanding, and there is a demand for technological capabilities and production systems that can supply cutting-edge products in a timely manner. In response to the needs of this era and the industry, the EMS (Electronics Manufacturing Service) Business Division is responsible for designing and manufacturing based on customer contracts. We cater to a wide range of needs, from simple assembly-type EMS through component supply to integrated EMS that encompasses all processes from development and design to final product production, as well as small-lot production of various types and mass production of small models. By bringing together the "wisdom," "skills," and "experience" of Takaya's engineers and flexibly combining them, we provide EMS solutions that address various challenges.

• EMS

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

In future public works, not only construction quality but also safety measures, environmental considerations, labor-saving, and the use of new technologies will be important, along with the ingenuity applied on-site. In this context, the "Hyper CLT Board," a wooden lightweight mat using CLT, can be utilized. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features the suppression of glare and metallic sounds unique to wood, as well as environmental considerations. Furthermore, it is a product that can easily incorporate proposals for the use of new technologies and creative ideas, as it is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." However, simply being registered with NETIS does not automatically result in additional points. What is important is to clarify the purpose and effects of its use on-site. Wooden mats, NETIS, civil engineering, CLT. The Hyper CLT Board is a new option to connect on-site ingenuity to evaluation.

Our company has launched the new "Kappa twin" dual-wheel caster for ultra-heavy load transport. It achieves a high load capacity of up to 2,200 kg per wheel, making it an optimal solution for transporting heavy items in industries such as automotive, aerospace, special vehicles, and heavy industry. The dual-wheel structure distributes the load, balancing high load capacity with excellent mobility. By reducing starting and rolling resistance, it supports smooth transport even for trolleys in the several-ton class. Additionally, it excels in turning performance, contributing to improved maneuverability in limited spaces. It is also suitable for AGVs (automated guided vehicles) and heavy transport trolleys, providing the stability, durability, and safety required in high-load environments. It covers weight ranges that were difficult to address with conventional products, contributing to solving transport challenges in manufacturing settings. This new product is recommended for companies looking to transport ultra-heavy items "more lightly and more safely."

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.