Duplicator MTS-SAS, which pursues data erasure operations for SAS, HDD, and SSD.

USB duplicator equipped with a CD-ROM function that prevents data tampering, deletion, and formatting using a dedicated USB, allowing for data protection.

The U-Reach C series USB duplicator offers optimal models ranging from 1:9 to 1:119 depending on the number of slots. It can write at a speed of 2.0GB per minute. CD-ROM creation involves a write protect feature to prevent data tampering, deletion, and formatting, resulting in Read-Only Memory (ROM). When this memory is inserted into a PC, it is recognized as a CD-ROM rather than a USB memory, allowing for automatic autorun. It is ideal for movies, music, and content. Traditionally, USB data did not have protection, leading to issues such as easy deletion, tampering, and formatting, making it unsuitable for distribution. A dedicated USB memory is required. Furthermore, with this duplicator, it is possible to erase CD-ROM formatted content and write new data multiple times. Overall, it allows for the selection of protection for each partition.

• Expansion Boards
• Other operation management software
• Encryption and authentication

An electric device that physically destroys HDDs with 12 tons of hydraulic power and 4 destruction bits. By swapping the destruction tool, it can also destroy SSDs and magnetic tapes.

1. Simple operation that allows physical destruction by simply inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs. 4. With just one main unit, by exchanging various destruction tools, it is possible to physically destroy SSDs and magnetic tapes (world's first). 5. Creates four holes in the HDD during a single destruction, destroying the recording surface platter. 6. Even if the destruction bit (pin) is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other server related
• Other security
• Data Erasing

An electric physical destruction device that cuts LTO and other magnetic tapes with 12 tons of hydraulic power and cutting blades. By replacing the destruction tool, it is also possible to destroy HDDs and SSDs.

1. Simple operation by just inserting the recording medium into the main unit and pressing the start button. 2. Destructive power of up to 12 tons. 3. Uses hydraulic power, enabling high-power magnetic tape cutting. 4. By exchanging various destruction tools on a single main unit, physical destruction of HDDs and SSDs is also possible (world's first). 5. Even if the cutting and destruction blade is damaged or worn, it can be easily replaced, allowing for continuous work with peace of mind at any time. 6. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other information systems
• Other security
• Data Erasing

An electric destruction device capable of physically destroying HDDs and SSDs with 12 tons of hydraulic power. By simply changing the tool, it can also destroy magnetic tapes with one unit.

1. Simple operation that allows physical destruction by just inserting the recording medium into the main unit and pressing the start button. 2. Destruction power of up to 12 tons. 3. Uses hydraulic power, enabling high-power destruction of HDDs and SSDs. 4. Creates four holes in an HDD and bends an SSD for physical destruction in a single operation. 5. With just a tool exchange on the main unit, physical destruction of magnetic tapes is also possible (world's first). 6. Even if the destruction bit at the tip is damaged or worn, it can be easily replaced, allowing for continued work with peace of mind. 7. Unique feature that prevents the HDD destruction shaft from becoming stuck after destruction. 8. Battery operation is possible even in locations without power, enabling on-site destruction work (world's first).

• Other server related
• Other security
• Data Erasing

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.