[All at Once Release] Summary of Our Company's Products

Simply installing it on the air conditioner filter reduces unnecessary power consumption. Many successful implementations.

"Continuum" is a static electricity removal sheet that maintains a constant negative potential due to the properties of special natural minerals. It improves the heat exchange efficiency that decreases due to static electricity issues in air conditioners, thereby reducing the operation of the compressor and recovering electricity costs for air conditioning. It can be easily cut with scissors to fit the size of the filter, allowing for easy installation in various types of air conditioners. It has been implemented in approximately 3,300 business locations, including 250 listed companies. 【Features】 ■ Simply cut to the required size and install between the dust filter and heat exchanger ■ Capable of suppressing unnecessary power consumption in various types of air conditioners ■ Made from lightweight and flexible materials. No running costs required ■ Improves previously wasted electricity costs. Reduces environmental impact through energy saving ■ Adopted in offices, factories, stores and facilities, hospitals and nursing care facilities, and tutoring schools ★ You can view materials featuring numerous case studies by clicking the download button below. Please feel free to contact us with any inquiries about the product.

• Anti-static products

With an IP66 waterproof rating, it can be installed 50 meters away from the main unit! Even in the event of extreme weather, it can be addressed simply by replacing the power supply.

Our original "ZF series" is a power-separated LED floodlight. By separating the power supply, it can be installed 50 meters away from the main unit. It can be installed in locations protected from sunlight (ultraviolet rays), rain, and saltwater. 【Features】 ■ Highest quality made in Japan Achieved high specifications at a low cost ■ Salt-resistant specifications allow use in salt-damaged areas - Aluminum: 6063 aluminum alloy + salt-resistant coating - Stainless steel: 6063 aluminum alloy + salt-resistant coating / Arm and hinge made of SUS316 stainless steel (Note: The salt-resistant coating is a 100-micron polyester resin powder coating applied to the entire unit) ■ Standard lightning surge protection of 20kV Prepared for recent abnormal weather conditions ■ IP66 waterproof and dustproof Usable both indoors and outdoors (Note: The power supply part is IP67) ■ PSE certified with a 5-year warranty confidence (Note: There may be exclusions even within the warranty period. Please refer to the catalog for details.) * For more details, please request a catalog or view the PDF data available for download.

• Floodlight

Waterproof standard IP66 specification that does not affect ship radio communication.

The Honest Original "V Series" is an LED floodlight that can be used on ships. It is also effective in various locations other than ships (see the applications and achievements below). 【Features】 ■ Completely waterproof, with IP66 rating for waterproofing and dustproofing, and has passed salt spray testing. ■ Compliant with PSE Electrical Appliance and Material Safety Law for safe use. ■ Equipped with a temperature protection circuit that automatically turns off the light if the power supply reaches a maximum temperature of 95°C. ■ Strong salt-resistant specifications, made of 6063 aluminum alloy with salt-resistant coating, and the arm and hinge parts are made of SUS316 stainless steel. ■ Standard lightning surge protection of 20kV, limiting current during lightning strikes for protection. ■ Compliant with EMS/EN61000-4-5, providing preparedness for natural disasters. *For more details, please refer to the PDF materials or feel free to contact us.

• Floodlight

Incredible waterproof and dustproof performance that can be used for various applications!

Our original "Field Light-X" is an all-in-one LED fluorescent light that does not require electrical work. With an IP67 waterproof rating, it can be used outdoors. Additionally, it can be linked together, making it highly effective on construction sites. 【Features】 ■ IP67 waterproof and dustproof Usable both indoors and outdoors (Note: the cord part is IP63, so please be careful when linking.) ■ Linkable design When using 100V, the 40W model can connect up to 15 units for a 100m illumination, and the 20W model can connect up to 25 units for a 145m illumination. (Note: When using 200V, please ensure not to insert 100V products and manage accordingly with proper labeling.) ■ Impact-resistant and made of the highest strength material Made of polycarbonate that will not break even if stepped on. ■ 3-year warranty As a Japanese manufacturer, we provide reliable support. (Note: There may be cases where certain conditions are excluded even within the warranty period. Please refer to the catalog for details.) *For more information, please request a catalog or view the PDF data available for download.

• Other lighting equipment

Since it is flicker-free, you won't be troubled by noise and can use it anywhere.

The ballast-free type is a flicker-free LED. It can be used in various locations such as ships, heavy machinery, studios, and museums. This is our number one popular product, with cumulative sales exceeding 13,000 units. *Please note that this product has polarity. 【Features】 ■ Waterproof rating IP65 Can be used indoors and outdoors due to its waterproof and dustproof design. ■ Flame retardant ■ Major manufacturer The LED chip is made by "Epistar," in collaboration with the Japanese manufacturer Toyota Gosei. ■ Energy-saving The power consumption of LEDs is about 1/8 that of incandescent bulbs. *This bulb is compatible with DC (12/24V). Please be aware that it cannot be used with non-specified power sources (such as household AC 100V).

• LED

Using eco-friendly functional glass, BioGlass!

By simply adding it to the auxiliary tank of the car's radiator, it improves fuel efficiency and reduces harmful exhaust gases. Bioglass weakens the surface tension of the coolant, cools the engine quickly, promotes complete combustion of gasoline, and achieves improved fuel efficiency. 1. Add CAR UP to the auxiliary tank of the radiator. 2. The surface tension of the coolant in contact with the bioglass becomes smaller (weaker). 3. The coolant with reduced surface tension cools the engine quickly. 4. The contact area between the coolant and the engine block increases, enhancing thermal conductivity and cooling effectiveness. Additionally, the friction resistance of the coolant decreases, allowing it to circulate faster and improve cooling efficiency. 5. The engine can be cooled efficiently, allowing more air to enter the cylinders. Following these steps, fuel efficiency increases and harmful exhaust gases are reduced.

• Fuel system parts

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.