Easily install security equipment / New product for security ceiling holes

New product for ceiling holes for evacuation route guidance lights to facilitate installation.

■Features of the Ceiling Hole for Emergency Lights (Installation) 1. Wiring in the ceiling space and installation of emergency lights can be done from inside the room after the ceiling work is completed. 2. Wiring in the ceiling space and installation of emergency lights for new construction, renovations, and extensions can be easily done from inside the room. 3. Wiring in the ceiling space and installation of emergency lights can be easily done from inside the room without exposed wiring, preserving the interior design of the building, and achieving a neat and tidy finish. 4. Construction time can be reduced (by half) and construction costs can be lowered (by one-third), allowing for safe work and easy installation of emergency light systems. Maintenance work can also be easily performed. ■Features of the Ceiling Hole for Emergency Lights (Product) 1. It is a round inspection opening (entry point) for emergency lights that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work on ceiling finishing materials or ceiling substrate materials is required, and specialized contractors are not needed. 4. It can be installed on ceilings without substrate materials (such as traditional Japanese room ceilings). 5. The installation or replacement of emergency lights can be easily done on the floor surface instead of the ceiling surface (by removing the cover). 6. Connection checks and inspections can be performed without removing wiring devices, and the direction can be freely changed (by removing the cover) (changing the direction of the cover).

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

New product for fire sealing holes that makes fire protection equipment installation easier.

■Features of Fire Sealing Holes (Installation) 1. Wiring in the ceiling space and installation of fire equipment can be done from indoors after the ceiling work is completed. 2. Wiring in the ceiling space and installation of fire equipment for new construction, renovations, and extensions can be easily done from indoors. 3. Wiring in the ceiling space and installation of fire equipment can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a good finish and appearance. 4. Construction time can be reduced (by half), and construction costs can be lowered (by one-third), allowing for safe work and easy fire equipment installation. 5. Confirmation and inspection of connections can be easily done from indoors, making maintenance tasks easier. ■Features of Fire Sealing Holes (Product) 1. A fire sealing hole (fire round entry point) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling base materials, and no specialized contractors are required. 4. It can be installed even in ceilings without base materials (such as traditional Japanese room ceilings). 5. Installation or replacement of fire equipment on the cover can be easily done from the floor instead of the ceiling (by removing the cover). 6. Confirmation and inspection of connections can be done without removing the fire equipment, and the direction can be freely changed.

• Other safety equipment
• PBX/IP phone
• LAN construction and wiring work

New product for security ceiling holes that makes security equipment installation easier.

■Features of Security Ceiling Holes (Installation) 1. Wiring in the ceiling and installation of security devices can be done from indoors after the ceiling work is completed. 2. Installation of security equipment in new construction, renovations, and extensions can be easily done from indoors. 3. Wiring and installation of security devices can be easily done from indoors without exposed wiring, preserving the interior design of the building, and achieving a neat and aesthetically pleasing finish. 4. Construction time can be reduced by half and costs can be lowered by a third, allowing for safe work and easy installation of security equipment. 5. Connection verification and inspections can be easily performed from indoors, making maintenance tasks easier. ■Features of Security Ceiling Holes (Product) 1. A security ceiling hole (round entry point for security) that can be installed in ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. No repair work on ceiling finishing materials or ceiling framing is required, and no specialized contractors are needed. 4. It can be installed in ceilings without framing (such as traditional Japanese room ceilings). 5. Installation or replacement of security devices can be easily done on the floor rather than the ceiling (by removing the cover). 6. Connection verification and inspections can be performed without removing the security devices, and the direction can be freely changed.

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

New product for fire-fighting sealing holes that makes sprinkler installation easier.

■Features of Firefighting Sealing Holes (Construction) 1. The installation of pipes, conduits, and heads can be done from inside the room after the ceiling work is completed. 2. It does not result in exposed wiring, preserving the interior design of the building, and can be finished neatly and attractively. 3. It allows for a reduction in the construction period of sprinkler work (by half) and a decrease in construction costs (by one-third), enabling safe work. 4. The direction of the heads attached to the cover can be freely adjusted and replaced. 6. Confirmation and inspection of the connections of the ceiling pipes can be easily done from inside the room, making maintenance work easier. 7. The installation of pipes, conduits, and heads for sprinkler work in new constructions, renovations, and extensions can be easily done from inside the room. ■Features of Firefighting Sealing Holes (Product) 1. It is a firefighting sealing hole that can be installed on ceiling finishing materials. 2. It has a good appearance and can be easily installed with a one-touch mechanism. 3. There is no need for repair work on ceiling finishing materials or ceiling substrate materials. 4. It can be installed even on ceilings without substrate materials (such as traditional Japanese room ceilings).

• Other safety equipment
• PBX/IP phone
• LAN construction and wiring work

A gas leak detector can be installed in the ceiling from inside the room. / New product for gas leak detector fittings.

■Features of Gas Leak Detector Brackets (Installation) 1. The gas leak detector can be installed from inside the room into the ceiling space, allowing for early detection of gas leaks in the ceiling. 2. The cover can be opened from inside the room, making it easy to test and inspect the gas leak detector in the ceiling space. 3. The installation of the gas leak detector brackets can be done neatly and easily without compromising the building's appearance. 4. Installation, fire testing, and inspection of the gas leak detector can be safely performed from inside the room without entering the ceiling space. ■Features of Gas Leak Detector Brackets (Product) 1. This is a gas leak detector bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. No repair work on ceiling finishing materials or ceiling framing materials is required. 4. It can be installed on ceilings without framing materials (such as traditional Japanese room ceilings).

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

Pest control for cockroaches in the attic can be done from indoors / New product for cockroach sealing holes.

■Features of Cockroach Sealing Holes (Installation) 1. Cockroaches in the attic can be exterminated from inside the room. 2. It can be easily installed from inside the room onto the ceiling, allowing the lid to be opened for the placement of extermination supplies in the attic. 3. It can be installed easily and neatly without compromising the building's appearance. ■Features of Cockroach Sealing Holes (Product) 1. It is a ceiling-mounted fire alarm bracket that can be installed on ceiling finishing materials. 2. It has a good appearance and allows for easy one-touch installation. 3. No repair work on ceiling finishing materials or ceiling framing is required, and no specialized contractors are needed. 4. It can be installed even on ceilings without framing (such as traditional Japanese room ceilings).

• PBX/IP phone
• LAN construction and wiring work
• Other network tools

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.