Pressure gauge) has obtained ISO/IEC 17025:2017 certification!

ISO/IEC 17025:2017 certification ensures reliable calibration under ISO certification.

At HAT, we conduct "calibration services for illuminance meters." Our company is ISO certified, allowing us to perform calibrations to high standards. We leverage our experience and achievements in aerospace component processing to offer reliable technology and trust. We can also accommodate older models and those that have been discontinued or are out of warranty, so please feel free to consult with us! We flexibly respond to customer customizations (adding measurement points, additional notes on documents)☆ 【Features】 - ISO/IEC 17025:2017 certified - Capable of handling older models, including those discontinued by manufacturers or out of warranty. - Typically, we can return items within 14 business days. We also accept inquiries for shorter turnaround times. 【Specification Range】 - Illuminance meter: 1Lux to 10,000Lux

• Optical Measuring Instruments

ISO/IEC 17025:2017 certified, we are accredited by ISO and perform calibrations to high standards.

At HAT, we conduct "calibration services for luminance meters." We are accredited under ISO/IEC 17025:2017, providing reliable calibration at high standards. We can accommodate short lead times and older models. We flexibly respond to customer customizations (adding measurement points, additional notes on documents)☆ 【Features】 - ISO/IEC 17025:2017 accreditation - Support for older models, including those that are no longer in production or out of warranty by the manufacturer. - The usual turnaround time is 14 business days, but we also accept inquiries for shorter lead times. 【Specification Range】 - Luminance meter 100FL to 200,000FL (342.63cd/m² to 685,251.82cd/m²)

• Optical Measuring Instruments

ISO/IEC 17025:2017 accredited comparison calibration method using standard pressure gauges, non-calibrated pressure meters, and calibration pressure pumps.

H.A.T. conducts calibration services for pressure gauges. We are ISO certified and perform calibrations to high standards (ISO/IEC 17025:2017 accredited). Our experienced professionals handle comparative calibration using standard pressure gauges, non-calibrated pressure gauges, and calibration pressure pumps, ensuring meticulous service you can trust! We flexibly accommodate customer customizations (adding measurement points, additional notes on documents)☆ 【Features】 - ISO/IEC 17025:2017 accredited - Typically, we can return results within 14 business days. We also accept inquiries for shorter turnaround times. 【Specification Range】 ● Target Models: Mechanical pressure gauges (Bourdon tube) ● Target Items: Air pressure gauges (low pressure), air pressure gauges (high pressure), fluid pressure gauges (oil) ● Calibration Range: - Air pressure gauges (low pressure) 1kPa to 1000kPa / 0.145psi to 145.037psi - Air pressure gauges (high pressure) 0.1MPa to 7MPa / 14.503psi to 1015.26psi - Fluid pressure gauges 0.1MPa to 100MPa / 14.503psi to 14503.7psi

• Pressure

We are implementing calibration methods through comparative measurements between standard measuring instruments and non-calibrated measurements, certified under ISO/IEC 17025:2017.

Calibration is a task that investigates whether measurement values are accurate, unlike repairs or maintenance. By conducting it regularly, we can infer the condition of the measuring instruments during that period. The primary purpose of calibration is to estimate the condition of the equipment by looking back over a certain period. Our company is ISO certified and can perform calibration to high standards. We can also accommodate older models or those that are no longer produced or out of warranty, so please feel free to consult with us! We are flexible in accommodating customer customizations (adding measurement points, additional notes on documents)☆ 【Features】 - ISO/IEC 17025:2017 certified - Capable of handling older models, including those that are no longer produced or out of warranty by the manufacturer. - The usual turnaround time is 14 business days, but we also accept inquiries for shorter turnaround times. 【Specification Range】 - Ultraviolet intensity meter 50μW/㎠ to 30,000μW/㎠ (wavelength 365nm)

• Optical Measuring Instruments

We provide high-standard calibration certified by ISO! *Compatible with older models *Delivery time: around 14 business days

At H.A.T., we perform calibration of measuring instruments. ■ Calibration of Optical Instruments ■ ● Target Models: Ultraviolet Intensity, Illuminance, Luminance ● Calibration Range: Optical Calibration ・Ultraviolet Intensity Meter 50μW/cm² to 30,000μW/cm² (Wavelength 365nm) ・Illuminance Meter 1Lux to 10,000Lux ・Luminance Meter 100FL to 200,000FL 　　　　(342.63cd/m² to 685,251.82cd/m²) ■ Calibration of Pressure Gauges ■ ● Target Models: Mechanical Pressure Gauges (Bourdon Tube) ● Target Items: Air Pressure Gauge (Low Pressure), Air Pressure Gauge (High Pressure), Fluid Pressure Gauge (Oil) ● Calibration Range ・Air Pressure Gauge (Low Pressure) 1kPa to 1000kPa / 0.145psi to 145.037psi ・Air Pressure Gauge (High Pressure) 0.1MPa to 7MPa / 14.503psi to 1015.26psi ・Fluid Pressure Gauge 0.1MPa to 100MPa / 14.503psi to 14503.7psi If you have any questions, please feel free to contact us.

• Other electronic measuring instruments

We exhibited a booth at the "4th Annual Meeting of the Japanese Society for Antibody Research" held at Omiya Sonic City from December 1 (Monday) to December 3 (Wednesday). Thank you very much to everyone who visited our booth during the event. Thanks to your support, we were able to successfully conclude the meeting. If you have any questions regarding the products you viewed, please feel free to reach out to us. We will respond to inquiries received during the event in due course. We appreciate your continued support of Higuchi Shokai. ▼Exhibited Products - Various assembly parts (bags, bottles, sampling, etc.) - Depth filters (post-culture filtration)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.