[Case Study] High-pressure cleaning of the bottom of an artificial shallow pond in the garden of a certain company facility in Tokyo.

Significantly faster than conventional high-pressure washing! For cleaning the bottom of a pond close to 1,000m2, the work can be completed in 4 days.

We received a request regarding a man-made pond approximately 20 cm deep that has become murky due to the inflow of dead leaves and the growth of moss and algae. Since it is impossible to clean while there is still water in the pond, we drained all the water, removed the dead leaves and algae, and then proceeded with the cleaning. To clean after draining, we needed a system that allows for simultaneous wastewater collection during the cleaning process, so we introduced our "HOTJEBLO Fujiyama R2." We were able to demonstrate that the simultaneous suction method is effective for cleaning, as the moss removed during the cleaning tends to reattach. 【Case Summary】 ■ Equipment Used: HOTJEBLO Fujiyama R2 ■ Issues: - The pond becomes murky due to the inflow of dead leaves and the growth of moss and algae in a man-made pond approximately 20 cm deep. - A system that allows for simultaneous wastewater collection during cleaning is necessary for continued work after draining. *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

Overwhelming reduction in work time! By eliminating wastewater discharge and enabling simultaneous cleaning and wastewater collection, it is possible to centralize the process.

We have verified how the "Hot Jeblo Method" is superior to conventional high-pressure washing. Conventional high-pressure washing requires protective measures against splatter and post-treatment of wastewater, but with the "Hot Jeblo Method," there is no wastewater runoff, allowing for the integration of washing and simultaneous wastewater collection. The advantage of simultaneous washing and wastewater collection is a significant reduction in work time. We have a verification video, so please take a look. 【What is the HOTJEBLO Cleaning System?】 ■ HOT (hot water device) + JET (high-pressure pump) + BLOWER (vacuum) ■ Integration of high-pressure washer, hot water device, and vacuum ■ Simultaneous processing of washing, rinsing, and wastewater treatment in three steps ■ Significant reduction in work time and labor *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.

In civil engineering sites, it is important to clearly communicate not only safety and workability but also "what kind of initiatives the site is undertaking." Hyper CLT mats are civil engineering mats that utilize wood CLT. They look significantly different from conventional steel plates, so when laid at site entrances, viewing routes, or material yards, they create a strong visual impact. In particular, during inspections by clients, site tours, and public open days for local residents, the use of wood, environmental considerations, and the application of new technologies can be conveyed in a "visible form." Additionally, they are lightweight and easy to install and remove, and they offer practical benefits such as reducing glare and metal noise, as well as CO2 fixation. Hyper CLT mats are registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They combine wood, NETIS, civil engineering, and CLT, making them a new temporary material that can impressively convey the initiatives of the site.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.