[Limited Time Offer!!] Perfect for underfloor moisture and mold prevention! Super cheap sale on charcoal-based ceiling humidity control agents!!

[Featured on TV] The moisture absorption and release effect is over 8 times greater than that of binchotan charcoal (wood charcoal, bamboo charcoal), mineral zeolite, and artificial chemical products!! Charcoal-based ceiling humidity control material.

You cannot create a comfortable home without improving the ceiling and the attic! 【Issues with the crawl space and attic】 When building a house, not many people pay attention to the environment of the crawl space and attic, but these areas are the most important when considering the comfort of the home, the health of its occupants, and the durability of the building. 【Condensation occurring in the attic】 In buildings with insufficient insulation, the heat from winter heating accumulates in the attic, creating a significant temperature difference with the roof surface, which is cooled by the outside air. The warm air in the attic cools at the point of contact with the roof surface, causing condensation to form. The sheathing and rafters that support the roof of a typical house can become a source of mold due to this condensation, leading to deterioration in about 13 to 14 years.

• others

Features: ● Equipped with Intel Core Ultra 9 285H/7 255H/5 225H ● DDR5 SODIMM x 2 (up to 128G) (sold separately) ● VGA Switch DDI x 1, LVDS colay eDP x 1, DDI x 2 ● USB 2.0 x 8, USB 3.2 Gen 2 x 4 ● PCIe [x1] x 4, PCIe [x4] x 1, PEG [x8] + [x4] + [x4] ● 2.5GbE x 1 ● COMe Type6 standard, 95mm x 95mm size ● Operating temperature -20~70℃ ● Sold separately ECB-920A: Development carrier board COM-MTHC6-FAN01: CPU fan COM-MTHC6-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Processor: Qualcomm QCS6490 with Arm Cortex-A78 ×4 + Cortex-A55 ×4 (Octa-core) up to 2.7GHz ● LPDDR5 onboard memory (up to 8GB) ● Display: MIPI-DSI (4 lanes) ×1, DisplayPort ×1 ● USB 2.0 ×4 (one port supports OTG), Gigabit Ethernet ×2

In civil engineering sites during extreme heat, the surface temperature of the ground plates and the heat reflection significantly affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, posing challenges for workers' heatstroke prevention and safety management. Hyper CLT ground plates are civil engineering materials utilizing wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, making them a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature differs by about 20 degrees compared to steel plates, making them effective as a solution for heat prevention and reflection suppression. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. They are materials that easily promote noise reduction, CO2 fixation, and environmental consideration unique to wood. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they can also be utilized for creative ideas and safety measures in public works. They are recommended for companies looking to reassess the summer site environment. We also accept inquiries for consultations and requests for materials tailored to site conditions. We can propose solutions for temporary plans during summer for both public and private civil engineering projects. Please feel free to consult with us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.