We will be exhibiting at Inter Aqua 2024. We look forward to your visit!

Supports various membrane types with a small amount of samples. Achieves tests close to actual machines using a cross-flow method!

The "SEPA CF II" is a cross-flow flat membrane testing device that can conduct tests with a small amount of sample liquid. It comes with a variety of flat membranes and spacers, allowing for the testing of RO membranes, NF membranes, UF membranes, and MF membranes under various operating conditions from low to high pressure. With simple operation, it can obtain data useful for scale-up. It is available as a unit and can accommodate specification changes such as piping materials. 【Features】 ■ Contributes to simplifying work and reducing costs ■ Suitable for small starts due to lower initial costs ■ Immediate evaluation and experimentation possible with unit provision ■ Usable with flat membranes of 19cm x 14cm (effective membrane area of 140cm²) ■ Active in research and development departments for chemicals, food, pharmaceuticals, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Coating thickness gauge

Attention those struggling with high-pressure pumps! Solve pump issues in membrane separation treatment of seawater, wastewater, solvents, chemicals, etc., with diaphragm seal-less characteristics.

The HydraCell pump, with over 40 years of proven performance in the water treatment industry, is widely adopted by major domestic water treatment manufacturers for RO and UF systems. In the United States, where the manufacturer is located, it is also used in RO systems for submarine life support, achieving one of the greatest successes in this application. Thanks to its seal-less design, it can continuously and stably pump various liquids, including seawater, industrial wastewater, organic solvents, and chemicals, at high pressure without issues. The low pulsation achieved through three or five-piston configurations also helps reduce the burden on membranes. We are currently offering a free booklet that explains the benefits of using the HydraCell pump! **Benefits of the HydraCell Pump:** 1. A wide range of lineup options, accommodating everything from small flat membrane RO test units to 8-inch systems! 2. Choice of wetted materials including SUS316L, duplex stainless steel, Hastelloy C, and ceramic! 3. Accurate flow control while maintaining constant pressure! 4. The seal-less design eliminates concerns about liquid leakage due to corrosion of mechanical seals, allowing for 100% containment of liquids! 5. Capable of dry running! *For more information, please check our catalog and videos. Feel free to contact us with any inquiries.*

• Positive Displacement Pump
• Special Pump
• Water treatment equipment

We would like to introduce our products specialized in water treatment among our offerings! We are also providing a "Functional Membrane Selection Guide" to assist in selecting functional membranes!

We would like to introduce the water treatment-related products handled by Sanko Co., Ltd. Since importing functional membranes from the United States in 1969, we have imported and sold numerous types of membranes from various manufacturers over many years. Based on this experience, we now provide products and services to a wide range of industries, including medical, pharmaceuticals, food, beverages, chemicals, and industrial wastewater. 【Product Lineup】 ■ Functional Membranes ■ Vessels ■ Testing Equipment ■ E-Cell * For more details, please refer to the PDF materials or feel free to contact us. * We are also offering a "Functional Membrane Selection Guide"!

• Other water treatment equipment

Achieve energy savings with high pump efficiency! A diaphragm pump with over 400 sales records in the oil and gas industry for jet pumps and long-distance, high-lift transportation!

The HydraCell "T100 Series (Low)" is a three-diaphragm pump designed for high flow and high pressure. It can operate with the suction piping closed or clogged, allowing for continuous dry running without damage, thereby reducing downtime and maintenance costs. Thanks to its special diaphragm shape, it can handle abrasive liquids that cannot be managed by gear, screw, or plunger pumps. 【Features】 ■ Maximum flow rate: 366.1 l/min ■ Maximum pressure: 14.5 MPa ■ Reduces maintenance costs such as seal and packing replacements ■ Supports operation under low NPSH conditions and negative pressure in the suction (no feed pressure required) ■ Capable of handling abrasive liquids ■ Achieves energy savings with higher pump efficiency compared to centrifugal pumps *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• Positive Displacement Pump
• Special Pump

A pressure vessel capable of accommodating a wide range of applications!

The "ROPV FRP Vessel" is a pressure vessel manufactured by ROPV, a company with one of the largest scales in China and a complete quality management system. It has a wide range of sizes and pressure resistance, making it suitable for many applications, and the side port design reduces installation space and costs. Additionally, it features a highly economical, robust, and easy-to-assemble structure. Compared to other overseas products, it can be manufactured and delivered in a relatively short period of time. Please feel free to contact us. 【Features】 ■ Manufactured by ROPV ■ Compatible with many applications ■ Achieves reduction in installation costs *For more details, please contact us or download the catalog.

• Stainless steel utensils and containers
• Other laboratory equipment and containers

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall