[Free Catalog Available!] What is "Stage Charging," which is also featured in our battery chargers? [Basic Knowledge Material]

Compact battery charger suitable for various charging applications.

The "GC Series" is a charger that employs a "two-stage charging" method for high efficiency and long battery life. The two-stage charging consists of an initial charge and a float charge. It is adopted as a built-in unit in chargers and is incorporated into portable power units and UPS systems. 【Features】 ■ Two-stage charging method ■ Wide input voltage: AC90–264V ■ Wide temperature range: -30℃ to +60℃ ■ W testing conducted in Taiwan and Japan ■ Primary and secondary side insulation design ■ Various protection features included *For more details, please refer to the PDF document or feel free to contact us.

• Other power sources
• Switching Power Supply
• Charger

"Tough charger" that endures even in harsh environments.

The HEP Series is a battery charger that supports a wide input voltage range with a three-stage charging method. Despite being a "high-quality" charger with various features and characteristics, the HEP Series is designed with an aluminum case filled with thermally conductive silicone, making it "tough." It can withstand applications in environments where high temperatures, high humidity, dust, high vibration (10G), oil (including machine oil), steam, altitude, oil smoke, and corrosive gases are present, which is why it is widely adopted due to its toughness. It is equipped with a PFC power factor correction circuit. The output voltage and current can be adjusted via an internal potentiometer. 【Features】 ■ High efficiency of 93.5% to 95.5% ■ Equipped with PFC (Power Factor Correction) circuit ■ Output voltage and current adjustable via internal potentiometer ■ Aluminum housing with high heat dissipation effect ■ Suitable for lead-acid and lithium-ion batteries ■ Adopts stage charging *For more details, please refer to the PDF document or feel free to contact us.

• Other power sources
• Switching Power Supply
• Charger

A compact battery charger capable of outputting 1600W with a high power density of up to 25W/inch³ with high efficiency.

The "RPB Series" is a compact battery charger capable of outputting 1600W with high efficiency and a maximum power density of 25W/inch³. By using communication protocols such as PMBus and CANBus, it can charge other types of batteries, including lithium-ion batteries. Additionally, the RPB-1600 is equipped with built-in protection circuit functions for safe and secure use. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with PFC (Power Factor Correction) circuit for power factor improvement - Forced cooling by built-in DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Can be connected in parallel for a maximum of 4800W (2+1) - Built-in OR-ing FET *For more details, please refer to the PDF documentation or feel free to contact us.

• Other power sources
• Switching Power Supply
• Charger

By using the output program function, PMBus, and CANBus, it is possible to charge other types of batteries such as lithium-ion batteries!

The "RCB Series" is a 19-inch rack-mounted 1U (41mm) battery charger with an output of 1,600W. By utilizing output programming functions, PMBus, and CANBus, it can charge other types of batteries such as lithium-ion batteries. Additionally, the RCB-1600 has built-in protection circuit functions, ensuring safe and secure usage. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Equipped with a PFC (Power Factor Correction) circuit for improved power factor - Forced cooling with an internal DC fan - Overvoltage protection, over-temperature protection, short-circuit protection, overload protection, and battery reverse connection protection - 19-inch rack-mounted 1U, capable of a redundant system up to 8,000W - Built-in OR-ing FET and hot-swap (hot-plug) support *For more details, please refer to the PDF document or feel free to contact us.

• Other power sources
• Switching Power Supply
• Charger

The charger applicable to lead-acid batteries and lithium-ion batteries can be programmed according to the battery used. Operating temperature range: -30°C to +70°C.

The "ENC Series" battery charger is a desktop type battery charger that adopts a three-stage charging method. It is suitable for lead-acid batteries (non-sealed, sealed, gel, AGM) and lithium-ion batteries (lithium iron phosphate, ternary lithium-ion, etc.), and the program settings can be adjusted according to the type of battery used. Additionally, it has built-in protection circuit functions, ensuring safe and secure usage. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Programmable charging method (optional item: SBP-001) - Remote ON/OFF control and built-in temperature sensor - Charging voltage can be set according to the type of battery - Over-voltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Maximum efficiency: 90.5% *For more details, please refer to the PDF document or feel free to contact us.

• Other power sources
• Switching Power Supply
• Charger

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall