Notice of participation in the 21st H2 & FC EXPO Hydrogen Fuel Cell Exhibition from February 28 (Wednesday) to March 1 (Friday), 2024.

All models support density measurement! Numerous achievements with cryogenic fluids (liquid nitrogen, liquid oxygen, liquefied methane, LNG), fuels, refrigerants, and high-viscosity fluids!

The "RHM-L" is a Coriolis mass flow meter that can directly measure mass using two omega (Ω) shaped tubes. The high-precision measuring omega tubes can be selected from parallel and serial connections, allowing for optimal choices based on usage conditions. Additionally, the Leonic sensor can generate a strong natural frequency through its unique torsional vibration method. 【Features】 ■ Direct mass flow measurement ■ Compact design ■ Wide temperature range -196 to +210℃ ■ No moving parts ■ Abundant tube (contact liquid) materials [Super Duplex, Hastelloy, HP160] *For more details, please refer to the PDF document or feel free to contact us.

• Other semiconductors
• Painting Machine
• Flow Meter

Ideal for various test benches! Introducing a lightweight and compact standard turbine meter.

The "HO Series" is a standard turbine meter that excels in linearity and reproducibility as measures of accuracy. Due to its wide range of operating temperatures, pressures, and measurement ranges, it is widely used in industries such as aerospace, automotive, cryogenics, and hydraulics. Additionally, the low pressure loss and high-speed response characteristic of standard turbine meters make them suitable for various test benches. 【Features】 ■ High precision ■ High-speed response ■ Low pressure loss ■ High temperature compatibility ■ High pressure compatibility ■ Lightweight/Compact 【Applicable Fluids】 Water, LLC coolant, engine oil, ATF oil, liquid oxygen, liquid nitrogen, Freon, solvents, aircraft hydraulic fluid, thermal oil, air, carbon dioxide *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

Analog output is also standard equipment! It is useful for remote monitoring, control, recording, and more.

The "GFM/GFC series" is a low-cost, general-purpose thermal mass flow meter. It features an angle-adjustable LCD display on the top, allowing for instantaneous flow readings. Please feel free to contact us if you have any inquiries. 【General Specifications (Excerpt)】 ■Measurement Accuracy ・±2.0% F.S. (15–25°C at 100–180kPa) ・±3.0% F.S. (0–50°C at 7–3400kPa) ■Reproducibility ・±0.5% F.S. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Lightweight and compact with pulse output! A micro flow meter capable of measuring biogas and corrosive gases.

We would like to introduce the 'MGC-1' handled by Nippon Flow Control Co., Ltd. This product is a milli gas counter suitable for measuring fluids such as biogas (methane gas, etc.) and corrosive gases. A typical application is the measurement of biogas generation from fermentation. As an option, we also offer the "RIGAMO system," which allows data collection from up to 24 units on a single PC, and the ability to analyze the generation amount and concentration of biogas. 【Features】 ■ Lightweight and compact ■ Minimum flow rate of 1ml/L ■ Pulse output available ■ Measurement of micro flow, biogas, and corrosive gases *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

No maintenance or replacement of the shaft seal required! This is a magnet-driven system with heat resistance and corrosion resistance. 【Suitable for hydrogen, ammonia, LNG, etc.】

The magnet coupling "DST" transmits torque between the inner rotor and outer rotor non-contact, and is designed to prevent leakage with a barrier. Therefore, it can be used as a method to prevent liquid and gas leaks in pumps and agitators for hazardous liquids and gases, enabling the realization of equipment specifications that prioritize safety. It is suitable for new energy sources aimed at carbon neutrality, such as hydrogen, ammonia, and LNG! Additionally, it eliminates the need for maintenance and replacement of shaft seals, allowing for reduced work time. 【Features】 ■ ATEX explosion-proof certification ■ Non-contact torque transmission (synchronous rotation) ■ No liquid leakage ■ Various customizations available ■ Maintenance-free (no need for shaft seal replacement) ■ Torque: standard specification 1~1200Nm, customization: 0.1~25000Nm *For more details, please download the catalog or feel free to contact us.

• Sealing

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange