Raman UV-curable resin

By using micro-Raman, it is possible to evaluate the crystallinity in a fine range (1μm and above)!

At Aites Co., Ltd., we offer analysis and reliability evaluation services for "Crystallinity Analysis of Resin Materials using Micro-Raman Spectroscopy." Using the spectra obtained from a micro-Raman spectrophotometer, it is possible to determine the crystallinity of resin materials in fine detail based on the differences in the half-width of the peaks. We also have analysis cases that investigate the changes in crystallinity from the mouth of PET bottles to the bottle body. Please leave the analysis, evaluation, and reliability assessment to us. [Overview] ■ Crystallinity Analysis of Resin Materials using Raman Spectroscopy - The linewidth of the Raman spectrum changes to reflect crystallinity - It is possible to determine the half-width of the C=O stretching band and the crystallinity - It is possible to determine the relative crystallinity of PET *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Contract measurement
• Contract Inspection

Depth-direction measurements using Raman spectroscopy! Material analysis of each layer is possible from the surface of multilayer films.

Our "Micro Raman Spectrophotometer" employs a confocal optical system, allowing for the adjustment of the focal position in the depth direction, similar to a microscope, enabling material analysis of each layer from the surface of multilayer films. Using the confocal function of the micro Raman spectrophotometer, the focus of the Raman laser light can be varied in the depth direction. Additionally, by continuously changing the focal position, it is possible to obtain spectra continuously in the depth direction. 【Features】 ■ Adoption of a confocal optical system ■ Enables material analysis of each layer from the surface of multilayer films ■ Capable of varying the focus of the Raman laser light in the depth direction ■ Allows for continuous spectral acquisition in the depth direction *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Spectroscopic Analysis Equipment
• Contract Analysis

Analysis of inorganic compounds such as metal oxides is also possible!

The corrosion process of iron involves various compounds depending on the degree of corrosion, and even the same iron oxides and hydroxides exhibit different spectra due to differences in valence and crystal structure. Raman analysis allows for the confirmation of the oxidation state of iron in a micron-order fine range. [Analysis Content] ■ Analysis of rust formed on the iron surface - A mixture of FeOOH and Fe2O3 - A mixture of FeOOH, Fe3O4, and Fe2O3 ■ Raman spectrum of iron rust components *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Analysis Services

Analysis of inorganic compounds such as metal oxides is also possible! We will introduce the analysis of black spots on the surface of copper-clad laminates.

We would like to introduce a case where discoloration on the surface of a copper-clad laminate was analyzed using Raman spectroscopy. Our Raman spectral analysis can analyze not only organic substances but also inorganic compounds such as metal oxides. Please feel free to contact us when needed. [Analysis Details] ■ Analysis of black spots on the surface of the copper-clad laminate - Slight discoloration is observed on the surface - Upon magnification, a condition resembling black stains is seen - A spectrum of CuO was obtained from the discolored area - The nature of the discoloration is believed to be copper oxide formed on the surface of the copper *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Analysis Services

Distinguish compounds with similar molecular structures through NMR analysis, elucidating the binding positions of side chains and substituents, as well as branching structures!

At Aites Co., Ltd., we conduct 1H NMR analysis of phthalate esters. NMR analysis is an effective method for distinguishing compounds with similar molecular structures and elucidating structures such as the bonding positions of side chains and substituents, as well as branching structures. In organic synthesis and polymer synthesis, it is an essential analysis to confirm whether the desired molecular structure has been obtained. The characteristic effects and efficacy of pharmaceuticals, supplements, food, and fibers are influenced by the positions of substituents in the molecular group and the molecular structure. Our skilled team will provide in-depth organic molecular structure analysis. *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis
• Contract Analysis
• Analysis Services

Analyze trace components in materials using thermal desorption GCMS! We perform characterization of various materials.

Aites analyzed photopolymerization initiators in UV-curable resins using GCMS and detected Irgacure 184, a type of photoinitiator (photo radical polymerization initiator). There are various structures of photoinitiators, and the wavelength of light they absorb and their reaction mechanisms differ depending on their structure. Such substances cannot be identified through main component analysis like IR, making thermal desorption GCMS analysis effective. Our company conducts characterization of various materials by analyzing and identifying trace components in materials using thermal desorption GCMS. Please feel free to contact us when needed. [Examples of photoinitiators] ■ Photo radical polymerization initiators ■ Photoinitiators for positive photoresists ■ Light crosslinking agents for negative photoresists *For more details, please refer to the PDF document or feel free to contact us.

• Contract Analysis

Introducing the results of IR analysis on peripheral materials for LCD displays and raw materials (pellets) such as fibers!

PMMA (acrylic), PET (polyethylene terephthalate), and PC (polycarbonate) are utilized in many applications, taking advantage of their characteristic transparency. They are essential materials for industrial products such as peripheral components of liquid crystal displays, protective films for mobile device screens, headlight covers, optical fibers, and textiles. This document presents the results of IR analysis of these raw materials (pellets). [Contents] - Analysis Sample: Characteristics of Ester/Carbonate-based Polymers - IR Spectrum (ATR Method) - Spectrum Comparison (Overlay) - Other Related Analysis Services *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

Essential materials alongside metals and inorganic materials! Introducing examples of analysis and evaluation services for organic materials.

Organic materials such as solvents, additives, pharmaceuticals, and plastics are essential materials alongside metals and inorganic materials. They have a wide variety of types due to combinations of light elements, and their specificity arises from structures, intermolecular forces, and electron behavior. However, it seems that chemical instrumentation analysis and evaluation are necessary for a fundamental understanding of their properties. This document presents examples of analysis and evaluation services for organic materials. [Contents] ■ FT-IR analysis ■ GC-MS analysis ■ Molecular weight distribution evaluation by GPC (SEC) *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices

The Raman spectrum reflects the functional groups of organic compounds! The curing reaction can be estimated to some extent.

Our company analyzes the spectra of UV-curable resins before and after UV irradiation. We irradiate UV-curable resin (acrylic type) with ultraviolet light and obtain Raman spectra before and after irradiation. Through the analysis of the Raman spectra, the curing reaction can be estimated to some extent. For a more detailed analysis of the curing mode, analyses such as GCMS are necessary, but our company can provide not only structural estimation but also reaction estimation through spectral analysis. 【Features of Raman Spectral Analysis】 ■ The curing reaction can be estimated to some extent. ■ We provide support for both structural estimation and reaction estimation. *For more details, please refer to the PDF materials or feel free to contact us.

• plastic
• Contract Analysis

In February of this year, we inquired about "paperlogic" using the Ministry of Economy, Trade and Industry's gray zone resolution system regarding the "provision of electronic contract services to the construction industry," and received a response stating that "paperlogic meets the standards related to construction contracts under the Construction Business Act Enforcement Regulations (Article 13-4, Paragraph 1, Item 1 (h) and Paragraph 2)." ◆ Accelerating DX in the Construction Industry with 'Official Approval' The construction industry faces challenges in digitizing contract operations due to the complexity of contracts, the presence of numerous stakeholders, and legal requirements and security concerns. However, due to the nature of the business, detailed contract operations occur frequently in the construction industry. Therefore, by digitizing contract operations, this sector can benefit significantly from cost reductions, such as stamp duty and labor costs, as well as shortened timeframes for contract execution. ◆ Package Plans for the Construction Industry Also Available paperlogic offers the 'paperlogic Construction Document DX Pocket' to facilitate smoother transactions between general contractors and partner companies. Please feel free to try our trial service from the "Service Application" section.

We would like to introduce the '96 Non Jacket Tubes 1.3ml Type' that we handle. These tubes are autoclavable and compatible with DMSO and vapor phase liquid nitrogen. They come with a rack lid locking feature and an anti-rotation function. Please feel free to contact us if you have any inquiries. 【Features】 ■ Rack lid locking feature ■ Anti-rotation function ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with vapor phase liquid nitrogen *For more details, please refer to the related links or feel free to contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.