Notice of Participation in the Kansai Logistics Expo (KANSAI-LOGIX) 2024

最大300 kgの重量物をラクに搬送！現場の省力化・効率化を実現する真空アシスト装置

真空バランサー「ジャンボ」は、段ボール箱や袋、ドラム缶や木板など様々な荷物をスピーディに運び、 作業の生産性を高める手動搬送システムです。 直感的な操作で簡単に使用でき、重量物を負荷を感じることなく運ぶ事が可能です！ 加工機への材料投入及び取り出し作業や入出荷エリアでの荷物の取扱いなど、 様々な搬送作業の現場で理想的なパートナーとなります。 【特長】 ◆ 搬送・積載時間を短縮し、生産性向上に貢献 ◆ 真空吸着により、ワークを傷つけずに安全搬送 ◆ 持ち上げ作業によるケガのリスクを軽減し、ダウンタイムを削減 ◆ 作業負荷を軽減し、従業員のモチベーション維持にも寄与 ◆ 体力に自信のない方でも、1人で簡単に重量物の搬送が可能 ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

• Balancer
• Other conveying machines
• Balancer

Can transport loads of up to 30 kg with light force! A battery-powered rope balancer that can be used anywhere without wiring or air.

The rope balancer "NEO30" can lift and move loads of up to 30 kg. By simply pulling the handle, you can raise and lower the workpiece with light force, and it can stop at any position. Additionally, it is battery-operated, eliminating the need for wiring or air piping, allowing for immediate installation and startup anywhere. 【Features】 ■ Battery-operated for immediate installation and startup anywhere ■ Simple and lightweight design ■ A variety of mechanical attachments available * For more details, please refer to the PDF document or feel free to contact us. * We offer a free on-site demo service to visit your location!

• Balancer
• lift
• Other conveying machines

Minimum body weight 3.6 kg! Vacuum gripper for palletizing and depalletizing.

Do you have any of the following concerns or requests? - I want to automate palletizing and depalletizing. - I want to use as small a robot as possible due to limited space. - I want to transport layers all at once. Our "Lightweight Layer Gripper ZLW" is a vacuum gripper designed for palletizing and depalletizing, achieving a maximum payload of 35 kg while weighing only 3.6 kg at its lightest. 【Features】 - Achieves high payload capacity despite its lightweight design. - Capable of handling various workpieces with one hand, allowing for layer transport all at once. - Allows selection of suction surfaces and the presence of vacuum generators according to the application, enabling an efficient system. - Available in three standard sizes. *Please download and view the "Product Catalog" from the link below. *Feel free to contact us with any inquiries.

• Pneumatic Equipment

Perfect for transporting a variety of small items in large quantities! A versatile robot hand that enables handling of diverse workpieces without the need for changing stages.

The general-purpose vacuum gripper FQE is a small robotic hand that uses sponge or suction pads on its gripping surface. It is very effective for handling workpieces with gaps, workpieces that are not positioned accurately, and bulk transport of various sizes of workpieces. Since one hand can accommodate various workpieces, it eliminates the need for designing and exchanging hands tailored to specific workpieces, contributing to time savings and increased productivity. Additionally, since the FQE complies with ISO/TS 15066, it can be utilized not only in automated transport processes with industrial robots but also in collaborative work with humans using collaborative robots. The configuration of the vacuum gripper allows for the selection of suitable specifications based on individual applications, including the presence or absence of a vacuum generator, the type of gripping surface, three types of gripper sizes, and valve types.

• Vacuum Equipment

Reduction of "section changes," a versatile robotic hand that accommodates a wide range of industries.

The FXP/FMP series universal vacuum grippers are large robotic hands that use sponge or suction pads on the gripping surface. They are very effective for handling workpieces with gaps that are difficult to grip with vacuum pads, workpieces that are not positioned accurately, and for bulk transport of various sizes of workpieces. They are used mounted on industrial robots such as press transfer robots and palletizing robots. The configuration of the vacuum gripper allows for the selection of optimal specifications according to individual applications, including the presence or absence of a vacuum generator, the type of gripping surface, gripper size, and valve type.

• Vacuum Equipment

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.