The working environment of the automobile parts manufacturing factory has greatly improved! The room temperature has decreased from 36 degrees to 28 degrees after the installation of the thermal barrier. Company S, which applied the "Thermal Barrier Sky Method" to the factory roof.

What is the patented construction method "Sky Method" that is applied from the top of a folded plate roof?

Cuts approximately 97% of "radiant heat from the sun" that cannot be prevented by insulation materials. The "Sky Method" is a patented technique that involves applying a heat-insulating sheet over a corrugated roof. 【Features of the Sky Method】 ■ Indoor temperature in summer decreases by about 11°C (maximum temperature difference based on experimental results) ■ Contributes to savings on air conditioning costs, prevention of product deterioration, and improvement of the working environment ■ Provides stable heat insulation effects regardless of the skill level of workers or weather conditions during installation ■ Effective against rain leaks ■ Uses a strong double-sided tape that does not peel off even in winds of 40m/s ■ Patent obtained (No. 6598337) *For more details, please download the PDF.

• Other air conditioning equipment

We have a large number of construction achievements!

We have numerous construction achievements using the Thermo Barrier "Sky Method." ▼We have introduced many examples on our company website. https://www.e-lifetech.com/works/f_sky/

• others

I will explain the principles of heat, such as why the shade of a flat roof is hot and why the shade of a tree is cool!

Why is it that the shade of a corrugated roof is hot while the shade of a tree is cool, even though the wind passes through and the temperature remains the same? The answer is "radiant heat." Radiant heat refers to electromagnetic waves such as far-infrared radiation. When you have a campfire in a drum can, your body warms up even though the wind is blowing. In this way, radiant heat moves from the hotter object (the drum can) to the cooler object (the human body), transferring heat regardless of the air temperature. [Reasons why the shade of a corrugated roof is hot] - Temperature in summer: 70°C to 80°C - Skin temperature of the human body: about 32°C to 33°C - Radiant heat from the corrugated roof is directed towards the human body - Even in the same shade, the perceived temperature can vary greatly due to the presence or absence of radiant heat *For more details, please refer to the PDF document or feel free to contact us.

• others

Difference between insulation materials and heat shielding materials: conductive heat, convective heat, and radiant heat.

Measures to reduce the temperature rise in buildings during summer are urgently needed. In this situation, heat insulation materials that can replace traditional insulation are gaining attention. What exactly are these heat insulation materials? Let me explain heat insulation in an easy-to-understand manner. About the heat insulation sheet "Thermo Barrier" that reflects 97% of radiant heat "Thermo Barrier" is a special sheet that reflects radiant heat with an "aluminum foil" coating. By adding this product to insulation materials, it reflects the radiant heat from the summer sun and helps to reduce the temperature rise of insulation materials and buildings. In winter, it works to prevent the heat from heating appliances from being released outdoors, reducing cold at the feet. With the dual effects of summer and winter, it achieves ideal insulation properties and reflects heat that traditional insulation cannot stop. 【Features】 ■ Coated with "aluminum foil" to reflect radiant heat ■ Has a high reflectivity with aluminum purity of over 99% ■ Reflects 97% of radiant heat such as far-infrared rays ■ Achieves ideal insulation properties with the dual effects of summer and winter For more details, please contact us or download the catalog.

• others

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.