[Exhibition] 4/10 to 4/12 "Sea Japan 2024" Exhibition Information

Fuji Kin's technological capabilities support the unknown high-pressure areas required for hydrogen stations.

This is a valve for hydrogen gas and liquid hydrogen. ■ Ultra-high pressure hydrogen gas compatible valve equipment A lineup of valve equipment for the near-future hydrogen society! - Control valves, shut-off valves, needle valves - Check valves, filters - Metal gasket fittings, welded fittings, cone & thread fittings ■ Ultra-high pressure liquid hydrogen gas compatible valve equipment This product is essential equipment for hydrogen stations. Based on accumulated technology, we have developed valve equipment that incorporates new technology to meet the needs for improving the filling capacity of hydrogen stations. <Features> Durability: 99.9 MPa Cryogenic compatibility: -253 to +50℃ 【Approximately 50 times compared to conventional】 High flow rate: Cv value 1 【Approximately 10 times compared to conventional】 Valve size: Overall height of the valve is about 50% less than conventional.

• Hydrogen battery
• valve
• Pipe Fittings

The <New V-Series> is a tube connector with excellent performance and quality.

<Features> The new V-Lok tube connector allows for connection simply by inserting the tube and tightening the nut, eliminating the need for special tools or open flames. Additionally, due to the unique interlocking action of the double ring, the ring effectively undergoes plastic deformation to compress the tube securely, resulting in very high pressure resistance.

• Pipe Fittings

<New V-Series> A 3-piece ball valve born from a new concept.

<Features> 1. 3-piece structure suitable for high flow rates 2. Can be opened and closed with a 1/4 turn of the handle 3. Connection types: V-Lok type, Rc, NPT male threads 4. Available in manual valve and automatic valve (single acting, double acting)

• valve

<New V-Series> A trunnion-type ball valve born from a new concept.

<Features> 1. Compact design that accommodates high flow rates. 2. Operable with low torque. 3. Flow patterns: 2-way type, 3-way type. 4. Can be panel-mounted.

• valve

<New V-Series> A plug valve born from a new concept.

<Features> 1. Simple and compact design. 2. Operable with low torque. 3. Full open and close operation with a 1/4 turn.

• valve

<New V-Series> A relief valve born from a new concept.

<Features> 1. Maximum operating pressure 41.3MPa 2. Can be set to the desired pressure using 8 types of springs. (Nominal diameter 6.35) 3. Can be set to the desired pressure using 3 types of springs. (Nominal diameter 12.7)

• valve

We are pleased to announce that JP Generators Co., Ltd. will be exhibiting at the 47th Joint Disaster Prevention Drill of the Nine Prefectures and Cities, which will be held on September 1, 2026 (Tuesday) at the Kanagawa venue, titled "Big Rescue Kanagawa." About Big Rescue Kanagawa: Big Rescue Kanagawa is a practical comprehensive disaster prevention drill focused on medical rescue activities, conducted in collaboration with medical institutions and disaster prevention organizations by Kanagawa Prefecture and Atsugi City at the Kanagawa venue of the Joint Disaster Prevention Drill of the Nine Prefectures and Cities. In addition to rescue training, we have prepared many enjoyable areas where you can learn about disaster prevention, including exhibition and experience corners. Our company will also be exhibiting at this comprehensive disaster prevention drill. ▼ The exhibited product will be the "Vehicle-mounted Generator | G-STREAM." We sincerely look forward to your visit.

[Instructor] Paulstar Communications Inc. Representative Director Koji Kita [Key Lecture Content] Have you ever felt that, despite entrusting work to Generation Z and young employees, they "don't seem to get started," "don't lead to the expected results," or "it's ultimately faster to do it myself"? Behind these situations are various factors, including the recognition gap between supervisors and young employees regarding "entrusting and being entrusted," how to communicate the purpose of the work, the approach, and the scope of discretion, as well as how to follow up after delegating tasks. In this seminar, we will practically explain "how to delegate work" to elicit proactive behavior, taking into account the perspectives and behavioral characteristics of Generation Z and young employees. We will share specific management techniques to help supervisors break free from the burden of work, encourage the autonomy and growth of young employees, and steadily lead to results.

[Speaker] Yoichiro Okuyama, Senior Researcher, Research Department, Hamagin Research Institute, Inc. [Key Lecture Content] In China, the operation of autonomous taxis began in 2021, and now fully unmanned robo-taxis are running in cities like Beijing and Shenzhen. Experiencing a ride reveals the evolution of technology through natural acceleration, smooth steering, and seamless deceleration. Currently, there are several thousand vehicles in operation, but projections suggest that by 2030, this number could exceed one million, accounting for 70% of the global total. What are the underlying factors driving the social implementation of robo-taxis in China? By incorporating local test ride experiences, we will analyze the revenue situation of robo-taxi operating companies and the outlook for market expansion based on data, exploring their future potential. [Lecture Items] 1. Personal experiences of test riding robo-taxis in China 2. Trends in the market size of robo-taxis in China and globally 3. Background of the advancing social implementation of robo-taxis in China 4. Public acceptance and actual usage 5. Performance and challenges of major robo-taxi companies 6. Will robo-taxis become widespread in Japan as well? 7. Q&A / Business card exchange

Daitō Shikō Co., Ltd. will exhibit at the "102nd Tokyo International Gift Show Autumn 2026," which will be held at Tokyo Big Sight from September 2 (Wednesday). At the exhibition venue, we plan to showcase new products including the A7 binder, popular foil-stamped goods, stationery, clear files, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

JIMTOF2026 JAPAN INTERNATIONAL MACHINE TOOL FAIR (33rd Japan International Machine Tool Exhibition) October 26 (Monday) to October 31 (Saturday), 2026, for six days Venue: Tokyo Big Sight (International Exhibition Center) Opening Hours: [West and South Exhibition Halls] 10:00 AM to 5:00 PM (until 4:00 PM on the last day) Booth Number: W4010-1 in the West Exhibition Hall Exhibitor Name: VARNALCO (our original brand name for automatic lathe tool holders) Our Exhibited Items: Tool holders for Swiss-type automatic lathes (rotating tools) *Spindle extension rods (for Nomura DS automatic lathes, can be attached to some models with guide bushes, can be modified to have equivalent functions to guide bushless models). More details will be explained at our booth.