[Budget Version] Supercritical Inert Gas Quantitative Supply Device - We have prepared an affordable model equipped with only the essential functions in response to requests like "I want a device like this!" and "With this budget..." This device can quantitatively supply CO2 and N2, and is suitable for applications beyond just foamed molding.

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

For precise liquid supply! Optional plunger cleaning function available.

This is a supply device that can be used for the precise delivery of various liquids, as one of the "integrated control unit models" in the high-performance, high-pressure multipurpose L.TEX series. For high-viscosity liquids and other fluids, it is possible to add a cleaning function that allows the use of a cleaning solution to flow through the pump's plunger while in operation. In addition to basic control functions, we can add desired features as options, allowing for a reasonable model with only the essential functions, as well as multifunctional, high-performance models tailored to your specific usage needs. We offer a wide range of models, from small flow rates for experiments to large flow rates for mass production, making them suitable for various applications. Additionally, the simple structure allows for easy self-maintenance.

• Other pumps

Please consult with us. We overturn the conventional wisdom of plastic! Environmentally friendly, high value-added foaming technology.

The "Supercritical Inert Gas Foaming Technology" is a high-value-added micro-foaming technology that considers both people and the environment. It does not have the explosiveness or flammability of hydrocarbon-based physical foaming agents, so there is no need to make the equipment explosion-proof. It is also free from the toxicity of chemical foaming agents and has no residual effects, making it excellent for recycling. Our company provides comprehensive support from raw materials to the entire molding equipment and the development of the molding process. Additionally, our foaming molding machines come standard with extrusion molding and RIM molding. If you are considering foaming molding, please feel free to contact us. 【Features】 ■ The foaming agent is non-explosive and non-flammable, eliminating the need for explosion-proof equipment. ■ It has a low global warming potential, taking the global environment into consideration. ■ It is non-toxic and has no residual effects, making it excellent for recycling. ■ It is capable of forming fine bubbles of several micrometers. ■ It can also be applied to foaming of crystalline resins, which were difficult to foam at high ratios with conventional methods. *For more details, please refer to the PDF materials or feel free to contact us.

• Gas recovery/treatment equipment

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.