From the Era of Paper to the Era of Plastic - How about using environmentally friendly biomass plastics?

Foamed sheets made from biodegradable resin PLA (polylactic acid) that are produced using environmentally friendly methods. They can be used for food trays, agricultural products, medical supplies, packaging, and cushioning materials.

Plasteco Co., Ltd. has consistently focused on "plastic production that considers people and the Earth" since its establishment. Through our unique technology that uses a safe inert gas with a low global warming potential to foam resins, we conduct research on plastic products and manufacturing methods that address environmental and resource issues, as well as the development and manufacturing of related equipment. With this technology, we have successfully achieved high-density foaming of plant-based biodegradable resins like PLA (polylactic acid), which were previously difficult to foam. Our foamed plastics are carbon neutral, derived from non-petroleum sources, and do not generate excess CO₂ during manufacturing and disposal processes, making them advanced materials that can be safely used in the future. Our foamed sheets are 100% biodegradable and do not use chemical foaming agents. Amid growing global concern over plastic waste, they can be applied in various fields as new environmentally friendly products, including food trays, packaging materials, and medical products. We have vacuum forming equipment and molds for testing, allowing for prototyping from sheets to formed products.

• plastic

Supplying safe and eco-friendly beverages! Total support from blow molding machines to labeling.

The "Ultra Lightweight Thin-Walled PET Bottle Filling System" has achieved a PET bottle that weighs only about 7g, which is approximately half the weight of conventional bottles, while maintaining the same strength. The "Ultra Lightweight Thin-Walled PET Bottle" can be easily crushed by anyone, reducing the collection cost of empty containers. Our company provides a comprehensive system configuration from blow molding machines to filling equipment, as well as printing and labeling. We can create a compact line configuration suitable for local production with a small variety of products. 【Features】 ■ Can be easily crushed by anyone, reducing the collection cost of empty containers ■ Weighs 7g (330ml), about half the weight of conventional bottles, but maintains the same strength ■ Filling and sealing are completed in a sterile state immediately after molding, eliminating the need for cleaning water ■ Caps can be chosen between aluminum heat seal type or screw caps *For more details, please refer to the PDF document or feel free to contact us.

• Filling and bottling machines

100% plant-based cloth that can be used for cleaning water areas such as kitchens and bathrooms, as well as for washing dishes. Compostable after use.

Multipurpose cloth made from foamed PLA sheets. It is molded using our unique environmentally friendly inert gas foaming process, resulting in a product with low environmental impact and carbon neutrality. Being 100% PLA, it has antibacterial properties and is compostable after use due to its biodegradability.

• plastic

[Environmental Consideration] Core material for tatami made from plant-based, earth-friendly, foam PLA material with excellent insulation, antibacterial, and moisture-proof properties [Carbon Neutral]

Foamed PLA (polylactic acid) is a material with lower environmental impact than conventional materials such as foamed polystyrene and other foamed plastics, as it is plant-based and biodegradable. Additionally, thanks to Plasteco's unique supercritical inert gas foaming technology, there are no residues like those from chemical foaming agents, and it is foamed and molded using methods that have a low global warming potential, making it an environmentally friendly product from raw materials to molding processes. The fine bubbles of PLA (bubble diameter 10-30μm) and the independent bubbles provide excellent thermal insulation, moisture resistance, and antibacterial properties, while also preventing the occurrence of dust mites and other pests from the tatami base. It also has soundproofing properties, creating a comfortable living environment.

• Other polymer materials

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Spline Network Co., Ltd. (Headquarters: Shibuya, Tokyo; President: Yoichi Yukino) will hold a free campaign for its WiSAS environmental scan service, one of its vulnerability assessment services, to commemorate the 6th anniversary of the release of the Wi-Fi Security Assurance Series (hereinafter referred to as WiSAS).

The end of the year and the beginning of the new year is an excellent time to reflect on the past year and plan for the next. How did your company approach DX in 2025? Did you consider implementing a production management system? Did you take a step forward in utilizing AI? This article provides a practical guide to objectively evaluate your DX efforts in 2025 and to formulate specific strategies for 2026. Why not take the time during the year-end and New Year to carefully review your company's DX strategy? For more details, please see the related links.

Microsoft has announced that it will end support for Basic Authentication in Client Submission (SMTP Authentication) for Exchange Online between March and April 2026. Once this support is discontinued, sending emails using Basic Authentication (SMTP AUTH) will no longer be possible. Therefore, we would like to provide information regarding the affected features and planned responses in the TECHS series as follows. Reference: Microsoft Information Exchange Online to retire Basic auth for Client Submission (SMTP AUTH) Retirement of Basic Authentication for Exchange Online Please see the related links for more information.

On December 15, 2025 (Monday), we published the magazine "Tekunowa" Vol. 5. ■ About the publication "Tekunowa" "Tekunowa" is a magazine published twice a year with the concept of "connecting the 'circle' of manufacturing companies that are users of TechnoA." It is distributed to user companies of the production management system "TECHS" series, as well as to various companies that have connections with us through opportunities such as exhibitions and visits to our company. We have previously introduced the innovative initiatives of user companies and received positive feedback. For more details, please see the related link.