We will exhibit at the 28th R&R Architectural Regeneration Exhibition 2024 from June 12 to 14, 2024.

[Presenting a Collection of Basic Knowledge on Film Thickness Gauges] Automatically recognizes the measurement substrate metal with a dedicated probe! It is possible to select connecting probes tailored to measurement applications such as for heat resistance.

The "SWT-NEO Series" from Sanko Electronic Research Institute is a thickness gauge that can be used for insulating coatings such as painting, lining, plating, and anodizing. Depending on the measurement application, you can choose from probes for ferrous substrates, probes for non-ferrous metal substrates, or connection probes that can be used for both ferrous and non-ferrous substrates. The slim body design reduces fatigue during handheld operation. The easy-to-understand guide display screen makes operation simple. 【Features】 ■ Automatic recognition of the measurement substrate metal by dedicated probes ■ Built-in statistical functions ■ Easy-to-understand guide display screen ■ Upper and lower limit functions ■ Slim body design ☆ We are currently offering a "Thickness Gauge Basic Knowledge Q&A Collection." * For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge

Revolution in film thickness measurement using advanced photothermal radiation methods.

The "Coat Master Flex" allows for film thickness measurement without being affected by materials or surfaces such as metal, resin, wood, CFRP, and ceramics, even in an uncured state! It enables a wide range of measurements, including on-site painting measurements and inline measurements. 【Features】 ■ Non-contact measurement of coating thickness in both wet and dry states ■ Compatible with curved surfaces, corners, and edges ■ Real-time measurement possible even during the operation of the painting line ■ Significantly reduces construction time, avoiding rework and returns ■ Immediate verification after application, potentially reducing material consumption by up to 30% ■ Measurement time per location is just a few seconds, with a measurement area of φ1 to 50 mm ■ Distance to the measurement target is 2 to 15 cm, with an irradiation angle of ±35° (no need for a right angle of 90°) ■ Weighs approximately 1.5 kg, lightweight and compact, making it ideal for on-site work *For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge

Portable probe-integrated film thickness gauge

Portable probe-integrated dual-type thickness gauge Automatically identifies and measures base metals Can measure in dark places with backlight FN type is single-function, Pro type is high-function Pro type features measurement value and calibration curve memory function, data transfer to PC - Measurement method: Electromagnetic and eddy current dual-use - Measurement range: 0–900μm to 2.5mm (ferrous base) 2.0mm (non-ferrous metal base) - Measurement accuracy: ±1μm or ±3% - Display method: LCD digital - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional function: Switchable display of 0.1μm (for measurements under 100μm)

• Coating thickness gauge

Probe-integrated model for iron base only.

This is a pocket-sized digital thickness gauge with an integrated probe and main unit. Zero and standard adjustments are easily performed with a one-touch button. Its lightweight, palm-sized body and simple key layout allow for easy one-handed operation. - Measurement method: Electromagnetic induction - Measurement range: 0 to 999μm to 2.5mm - Measurement accuracy: 0 to 100μm; ±1μm or ±2% of the indicated value 101 to 2.5mm ±2% of the indicated value - Display method: LCD, display hold - Probe: Single-point constant pressure contact type - Power supply: Two AA alkaline batteries - Dimensions and weight: 63×84×30 mm, 125g - Additional features: Backlight switch, auto power off switch, range switch for 0.1μm display (for measurements under 100μm)

• Coating thickness gauge

We introduce a low-frequency high-voltage pulse discharge pinhole detector.

We would like to introduce the pinhole detectors handled by Sanko Electronic Laboratory, namely 'TRC-70B'. The "TRC-70B" has a detection voltage of 1 to 7 kV (peak value), and is suitable for coating thicknesses of 1 mm or less. 【<TRC-70B> ■ Method: Low-frequency high-voltage pulse discharge type ■ Detection Voltage: 1 to 7 kV (peak value) ■ Power Supply: Built-in NiMH (Nickel-Metal Hydride) battery (with battery check function) ■ Charging Power Supply: AC 100 to 240V, 50/60Hz, MAX30VA ■ Target Coating Thickness: 1mm or less ■ Dimensions: 370(W) × 190(H) × 150(D) mm ■ Main Unit Weight: 3.9 kg * For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

Basic type of moisture measurement! Flexibly accommodates various moisture measurements with different connected probes.

The MR-200II is a compact electric moisture meter. With its upper and lower limit functions, it allows for easy checking of dryness and moisture levels. It features a large, easy-to-read LCD display on a compact body. It can flexibly accommodate various moisture measurements depending on the connected probe. The "standard probe" for use with the MR-200II is available for purchase separately. 【Features】 ■ Flexibly accommodates various moisture measurements depending on the connected probe ■ Large, easy-to-read LCD display on a compact body ■ Easy checking of dryness and moisture levels with upper and lower limit functions *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The goal is not to introduce AI. We will explain "standardization of manufacturing processes" to eliminate dependency and maximize the effectiveness of AI! While the spread of generative AI is progressing, there is an increasing number of manufacturing companies that say, "We don't know where to apply AI due to the black box nature of the site," and "Despite implementation, productivity hasn't increased." The cause lies not in the performance of AI, but in the "lack of business organization and standardization before implementation." In this webinar, we will clearly explain business improvement methods (BPMS) and how to properly organize business processes to avoid wasting AI investments, using case studies. [Recommended for those who:] - Are struggling to engage the field due to resistance like "busy" or "it's fine as it is." - Want to eliminate differences in rules between factories and locations, as well as dependency and black box issues with veteran employees. - Are being asked to "utilize AI" but don't know where to start due to disorganized business processes. [Here is the application form] https://www.earthlink.co.jp/seminar/10840/ *Pre-registration required (free) *We will give a "partial excerpt of the presentation materials" to those who respond to the survey after viewing.

[Speaker] Ms. Sayako Sumomo, Director, International Equipment Division, Equipment Policy Department, Acquisition, Technology & Logistics Agency [Key Lecture Content] As the security environment surrounding our country changes at an accelerating pace, the government is promoting defense equipment transfers as an important policy measure to create a desirable security environment for our nation. Promoting defense equipment transfers not only enhances regional deterrence and response capabilities for peace and stability in the Indo-Pacific region but also contributes to strengthening our country's defense production and technological base through market expansion and supply chain cooperation. Furthermore, the development of the defense industry and other industries with dual-use technologies can lead to growth in the Japanese economy. In this lecture, I will explain recent trends in defense equipment transfers, taking into account the recent revisions to the equipment transfer system. [Lecture Topics] 1. Japan's Defense Policy 2. Significance and System of Equipment Transfers 3. Recent Trends in Equipment Transfers 4. Government Initiatives 5. Q&A / Business Card Exchange

[Speaker] Hiroki Hara, Country Lead, Cloud & Service Provider Segment, Schneider Electric Holdings Co., Ltd. [Key Lecture Content] In the era of AI, it is essential to redesign not just the equipment but the very way energy is utilized in data centers. This presentation will organize the approach to power architecture aimed at enhancing competitiveness, taking into account global trends and the constraints of the Japanese market. Additionally, through Schneider Electric's comprehensive portfolio, which includes cooling and operations, we will provide perspectives for selecting optimal options in Japan's increasingly complex power environment, as well as hints for future implementations. [Lecture Items] 1. Introduction to Schneider Electric 2. Global megatrends and the external environment surrounding the data center industry 3. Architecture of data center power infrastructure - Design philosophy necessary for safely delivering electricity 4. Schneider's portfolio connecting power and cooling, design, construction, and operation 5. Unique challenges of the Japanese market and options for optimal solutions 6. Q&A / Business card exchange

[Speaker] Yuya Sato, Director, Innovation Management Co., Ltd. [Lecture Topics] 1. Main challenges in the field of research and development 2. Overview of research and development management 3. How to utilize "roadmaps" for formulating persuasive mid- to long-term strategies 4. How to utilize "technology portfolios" to achieve convincing resource allocation 5. "Gate management" to improve the success rate of highly innovative research and development themes 6. Integrated research and development management process 7. Q&A

Our TL Division will be exhibiting at the "Surface Treatment Processing Technology Exhibition 2026" to be held on June 26 (Friday) at the Osaka Industry Creation Center. We invite you to visit our booth to see our products and technologies. We sincerely look forward to your attendance. ■ Exhibition Name Surface Treatment Processing Technology Exhibition 2026 ■ Date June 26, 2026 (Friday) ■ Venue Osaka Industry Creation Center, 3F Market Plaza / 4F Event Hall ■ Exhibited Technology We will introduce optimal solutions for surface modification composites and ultra-hard coating removal by adding a new coating to Y-Coat, which leads the mold market. New Coating: Y-Coat Type UL Product Introduction Page