Outstanding versatility! A plunger pump capable of precise liquid delivery for various fluids【High-performance, high-pressure multipurpose pump L.TEX9800 series】.

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

We offer consulting services for sample contract manufacturing and foaming using supercritical inert gases, taking into consideration both people and the Earth, tailored to your desired resin and conditions.

At Plasteco, we have introduced our own extrusion molding and bead molding equipment, and we offer commissioned production of product samples. Foam testing can be conducted under your desired resin and conditions. ■ In-house experimental equipment - φ25 twin-screw - φ50 single-screw tandem foam extrusion device Supercritical carbon dioxide/nitrogen quantitative supply system (can be used in combination) Strand die: various hole diameters, pelletizer T-die: sheet width up to 150mm, thickness 0.2 to 3mm, cooling roll, take-off machine - φ40 twin-screw - φ65 single-screw tandem foam extrusion device Supercritical carbon dioxide/nitrogen quantitative supply system (can be used in combination) Strand die: various hole diameters, hot cut, underwater cut Circular die: sheet width up to 650mm, thickness 0.5 to 4mm, take-off and winding machine T-die: sheet width up to 400mm, thickness 0.2 to 3mm, cooling roll, take-off machine

• Prototype Services

This is a block board made of biodegradable foam beads that are non-petroleum-based, carbon-neutral, and have low environmental impact. Ideal for packaging materials, cushioning, and various three-dimensional shapes!

Beads made from plant-derived, biodegradable resin PLA (polylactic acid) are foamed using a unique extrusion foaming technology developed by Plasteco, which utilizes low environmental impact inert gases (CO2, N2) and are then steam-formed into block and board shapes. They can be processed into your desired shape through cutting and other methods! They can be used as an alternative to traditional expanded polystyrene for packaging materials and cushioning, as well as for three-dimensional objects and display items. High expansion foaming with a safe and inexpensive foaming agent (inert gas) also allows for a reduction in raw materials! PLA resin, which has a high raw material cost, can be foamed and molded at a low cost.

• plastic

Features: ● Equipped with Intel Core Ultra 9 285H/7 255H/5 225H ● DDR5 SODIMM x 2 (up to 128G) (sold separately) ● VGA Switch DDI x 1, LVDS colay eDP x 1, DDI x 2 ● USB 2.0 x 8, USB 3.2 Gen 2 x 4 ● PCIe [x1] x 4, PCIe [x4] x 1, PEG [x8] + [x4] + [x4] ● 2.5GbE x 1 ● COMe Type6 standard, 95mm x 95mm size ● Operating temperature -20~70℃ ● Sold separately ECB-920A: Development carrier board COM-MTHC6-FAN01: CPU fan COM-MTHC6-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Processor: Qualcomm QCS6490 with Arm Cortex-A78 ×4 + Cortex-A55 ×4 (Octa-core) up to 2.7GHz ● LPDDR5 onboard memory (up to 8GB) ● Display: MIPI-DSI (4 lanes) ×1, DisplayPort ×1 ● USB 2.0 ×4 (one port supports OTG), Gigabit Ethernet ×2

In civil engineering sites during extreme heat, the surface temperature of the ground plates and the heat reflection significantly affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, posing challenges for workers' heatstroke prevention and safety management. Hyper CLT ground plates are civil engineering materials utilizing wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, making them a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature differs by about 20 degrees compared to steel plates, making them effective as a solution for heat prevention and reflection suppression. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. They are materials that easily promote noise reduction, CO2 fixation, and environmental consideration unique to wood. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they can also be utilized for creative ideas and safety measures in public works. They are recommended for companies looking to reassess the summer site environment. We also accept inquiries for consultations and requests for materials tailored to site conditions. We can propose solutions for temporary plans during summer for both public and private civil engineering projects. Please feel free to consult with us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.