Plasteco-made [Supercritical Inert Gas Quantitative Supply Device] - Stable foaming can be achieved using low environmental impact inert gases.

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

Manufacturing of a complete set of molding systems and peripheral equipment, as a specialized manufacturer of safe, low-cost, and environmentally friendly foaming agents and inert gases (CO2, N2).

Plasteco Co., Ltd. is the world's only manufacturer specializing in foaming using inert gases (CO₂, N₂). We are capable of manufacturing a complete set of equipment, including supercritical inert gas extrusion foaming molding systems, gas quantitative supply devices, and dryers. Leveraging our long-standing experience and know-how cultivated through numerous sales achievements, we provide consistent and flexible support from raw materials to molding. ● Safe and inexpensive foaming agents ● High added value through ultra-fine foaming ● Reduction of greenhouse gases ● Raw material reduction through high expansion foaming ● Foaming of new materials such as biodegradable options is possible ● Comprehensive support from raw materials to molding

• Extrusion Machine

Foamed sheets made from biodegradable resin PLA (polylactic acid) that are produced using environmentally friendly methods. They can be used for food trays, agricultural products, medical supplies, packaging, and cushioning materials.

Plasteco Co., Ltd. has consistently focused on "plastic production that considers people and the Earth" since its establishment. Through our unique technology that uses a safe inert gas with a low global warming potential to foam resins, we conduct research on plastic products and manufacturing methods that address environmental and resource issues, as well as the development and manufacturing of related equipment. With this technology, we have successfully achieved high-density foaming of plant-based biodegradable resins like PLA (polylactic acid), which were previously difficult to foam. Our foamed plastics are carbon neutral, derived from non-petroleum sources, and do not generate excess CO₂ during manufacturing and disposal processes, making them advanced materials that can be safely used in the future. Our foamed sheets are 100% biodegradable and do not use chemical foaming agents. Amid growing global concern over plastic waste, they can be applied in various fields as new environmentally friendly products, including food trays, packaging materials, and medical products. We have vacuum forming equipment and molds for testing, allowing for prototyping from sheets to formed products.

• plastic

This is a block board made of biodegradable foam beads that are non-petroleum-based, carbon-neutral, and have low environmental impact. Ideal for packaging materials, cushioning, and various three-dimensional shapes!

Beads made from plant-derived, biodegradable resin PLA (polylactic acid) are foamed using a unique extrusion foaming technology developed by Plasteco, which utilizes low environmental impact inert gases (CO2, N2) and are then steam-formed into block and board shapes. They can be processed into your desired shape through cutting and other methods! They can be used as an alternative to traditional expanded polystyrene for packaging materials and cushioning, as well as for three-dimensional objects and display items. High expansion foaming with a safe and inexpensive foaming agent (inert gas) also allows for a reduction in raw materials! PLA resin, which has a high raw material cost, can be foamed and molded at a low cost.

• plastic

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Our speaker lineup has expanded with the introduction of 16 new models. This release includes the first IPX7 waterproof speaker in the standard Φ28mm size and a wideband speaker with the lowest resonance frequency of 130Hz in the 40mm size. Additionally, we have introduced enclosure boxes for acoustic testing with 15 x 11mm, 16 x 9mm, and 18 x 13mm speakers, enhancing our support system to facilitate easier design and prototyping. Size: 20 x 8 x 3 mm to 40.2 x 40.2 x 24 mm Shape: Round, rectangular, square, oval Sound pressure: 81 dB to 106 dB Impedance: 4Ω to 8Ω Resonance frequency: 130Hz to 800Hz Mounting type: 200mm lead wire, solder pad

Azearth Corporation (Headquarters: Taito-ku, Tokyo; President: Fumiaki Saito), a specialized supplier of protective clothing, launched sales of "AZ GUARDⓇ 8100FR"—a disposable protective suit featuring self-extinguishing properties—on July 1, 2026. This product was developed to maintain the performance of flame-retardant workwear and enhance worker safety. For further details, please feel free to contact us via the links below. *AZ GUARD is a registered trademark of Azearth Corporation.

Dear Sir/Madam, I hope this message finds you well and thriving. I would like to express my sincere gratitude for your continued support. We would like to inform you that our company will be closed for summer vacation during the following period: ■ Summer Vacation Period From Saturday, August 8, 2026, to Sunday, August 16, 2026. We will resume normal operations on Monday, August 17, 2026. Inquiries received during the vacation period will be addressed sequentially after the start of business. We apologize for any inconvenience this may cause and appreciate your understanding.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.