Added the 'Ultraviolet Bandpass Filter, Substrate: Hisashi Seiko Glass Co., IHU150' to the artisan coating.

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

It is an optical filter that cuts ultraviolet and infrared light while having a high transmittance in the visible light range.

A UV-IR cut filter is a filter that cuts light in the ultraviolet and infrared regions while having a high transmission rate in the visible light region. In other words, it is an optical filter that simultaneously realizes the characteristics of both a UV cut filter and an IR cut filter. By placing it in front of CMOS sensors or CCD sensors, it serves multiple roles such as cutting noise light, providing heat protection against various light sources, and preventing degradation of liquid crystal components due to ultraviolet light. It is an excellent optical filter and optical thin film with multiple functions. Are you facing any of these issues? - Is it possible to cut both ultraviolet and near-infrared light? - Can a filter be made that allows visible light to pass while blocking IR and UV wavelengths? - I want to reduce noise light and increase sensor sensitivity. Can I consult about this? - Is it possible to customize the wavelength range that I want to transmit? - Is processing to chip size possible?

• Other optical parts
• Surveillance Cameras
• Sensors

It achieves excellent ultraviolet transmission rates and can be adapted to the light sources you plan to use (such as high-pressure mercury lamps, various laser lights, UV LEDs, etc.).

Are you facing any of these issues? - I want to reduce reflection in the ultraviolet (UV-A) range. - I want to increase the transmittance at wavelengths that react with initiators, such as 365nm and 405nm. - I've heard that the UV range has a thin film thickness and is difficult to control... - I've heard that the substrates and film materials are limited; can you accommodate that? - I've heard that the measurement difficulty after film formation is high; can you handle that? ◆ We achieve excellent ultraviolet transmittance! By depositing multilayer dielectric films, we prevent light reflection from both sides of the substrate. Based on our achievements in visible light, we can also achieve high transmittance in the ultraviolet wavelength range by controlling the film formation process. However, the substrates that can be used for film formation are limited, so prior confirmation is necessary. By utilizing the characteristics of the substrates you will use and designing accordingly, we will realize the optimal filter.

• LED Module
• Ultraviolet irradiation equipment
• Sensors

It is a filter that efficiently cuts (reflects) short-wavelength UV (ultraviolet) light while allowing visible light to pass through.

What is a UV cut filter (ultraviolet cut filter)? It is a filter that cuts ultraviolet (UV) light while allowing visible light to pass through. In digital cameras, it is used to reduce chromatic aberration, and in liquid crystal projectors, it is used to prevent the degradation of liquid crystals and other optical components caused by the light from lamps (such as high-pressure mercury lamps), with the aim of cutting unnecessary ultraviolet light. Are you facing any of these issues? ◆ Is it possible to cut only the wavelength of ultraviolet light? ◆ Can a UV cut filter for projectors be coated? ◆ I would like to consult about the degradation of optical components. ◆ I would like to consult about filters that minimize the impact on the human body. ◆ Is it possible to custom adjust the wavelength range that I want to transmit?

• Other optical parts
• Lighting for image processing
• Sensors

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Features: ● Equipped with Intel Core Ultra 9 285H/7 255H/5 225H ● DDR5 SODIMM x 2 (up to 128G) (sold separately) ● VGA Switch DDI x 1, LVDS colay eDP x 1, DDI x 2 ● USB 2.0 x 8, USB 3.2 Gen 2 x 4 ● PCIe [x1] x 4, PCIe [x4] x 1, PEG [x8] + [x4] + [x4] ● 2.5GbE x 1 ● COMe Type6 standard, 95mm x 95mm size ● Operating temperature -20~70℃ ● Sold separately ECB-920A: Development carrier board COM-MTHC6-FAN01: CPU fan COM-MTHC6-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Processor: Qualcomm QCS6490 with Arm Cortex-A78 ×4 + Cortex-A55 ×4 (Octa-core) up to 2.7GHz ● LPDDR5 onboard memory (up to 8GB) ● Display: MIPI-DSI (4 lanes) ×1, DisplayPort ×1 ● USB 2.0 ×4 (one port supports OTG), Gigabit Ethernet ×2

In civil engineering sites during extreme heat, the surface temperature of the ground plates and the heat reflection significantly affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, posing challenges for workers' heatstroke prevention and safety management. Hyper CLT ground plates are civil engineering materials utilizing wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, making them a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature differs by about 20 degrees compared to steel plates, making them effective as a solution for heat prevention and reflection suppression. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of transportation, installation, and removal. They are materials that easily promote noise reduction, CO2 fixation, and environmental consideration unique to wood. Registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A," they can also be utilized for creative ideas and safety measures in public works. They are recommended for companies looking to reassess the summer site environment. We also accept inquiries for consultations and requests for materials tailored to site conditions. We can propose solutions for temporary plans during summer for both public and private civil engineering projects. Please feel free to consult with us.