We will be exhibiting at INTERPHEX Japan (INTERPHEX Week Tokyo) 2024!

An accessory that eliminates powder blockages such as in rat hole bridges and promotes smooth discharge. It is used by attaching it to the hopper outlet.

【Smooth discharge by moving powder like a liquid, reducing labor and raw material loss】 It is used by connecting air. Air flows into the hopper, promoting the discharge by fluidizing the powder. 【Structure with excellent cleaning properties to prevent cross-contamination】 The inner hopper has fine holes that allow air to be drawn in. The interior of the holes has a structure close to straight, making it easier to clean even when powder gets inside compared to multiple layers of meshes with different roughness. This reduces the risk of contamination in cases of producing multiple types on the same line or in the pharmaceutical industry, where high hygiene levels are required. 【Would you like to experience powder fluidization?】 You can experience powder fluidization using the aeration hopper at "INTERPHEX OSAKA," one of the largest pharmaceutical and cosmetic manufacturing technology exhibitions in Kansai! Please visit our booth. Event dates: February 25-27, 2025 Venue: Intex Osaka Booth location: Hall 5, 6-31 For visitor registration and other exhibited products, click here: https://www.monovate.co.jp/blog/blog/bipj-o2025/

• Other powder equipment

A stainless steel stirring device specialized for the uniform mixing of liquids and powders. Effective for powders that float on the liquid surface or clump together.

The negative pressure generated by the liquid flow of the pump draws the powder from the hopper into the piping, mixing it with the liquid in advance. This prevents the formation of clumps in the powder and floating on the liquid surface, reducing the mixing time until it is uniformly dispersed.

• Other processing machines

A stainless steel mixer that can rotate with the container. It is suitable for mixing powders and solid + liquid (such as seasoning food or coloring pellets).

This is a device that attaches lever band-type CTL-36 and 43 containers and rotates them to mix the contents. It can be used for mixing powders and granules in pharmaceutical manufacturing processes that cannot be done with a stirrer, as well as for seasoning food. Since there are no stirring blades or similar components, mixing can be done without damaging the materials. The containers are rotated and mixed while remaining sealed, eliminating concerns about foreign matter contamination. Because the containers are detachable, you can simply change the container to mix the next material without taking the time to clean and dry it. You can change the container for each type of content (i.e., dedicated containers), which helps prevent cross-contamination. *This product includes the mixing machine body and one lever band-type sealed container [CTL].

• Mixer/agitator

The stirrer, essential for the "mixing" and "formulation" processes in pharmaceutical and food manufacturing, may solve this problem.

In 2023, we revamped the cover and content. A manufacturer specializing in liquid mixing has created the "Bernoulli Flow Mixer," which focuses on centrifugal force. This PDF document explains the features and mechanisms that set it apart from other mixers! You can view it immediately by clicking the PDF download button.

• Mixer/agitator

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

The PDF document introduces some features of the heater unit and its adoption track record so far. **Advantages of the Heater Unit** 1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-saving. Since all the devices are mounted on the container, moving them is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is required, the heater has overwhelmingly lower initial costs. 3. Immediate Heating of the Jacket By using a 7.5 kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. The heater unit is made to order, so changes in "dimensions" and "materials," as well as custom processing to suit specific applications, can be accommodated.

• tank

CLT, which has been widely adopted in the construction field, is now expanding its applications into the civil engineering sector. The "Hyper CLT Mats" are civil engineering CLT products that utilize wood CLT as temporary materials. Traditionally, steel plates have been the mainstream choice for temporary roads, access routes, and heavy machinery yards. The Hyper CLT Mats introduce a new option of "wood" to that market. The 5x10 mats weigh approximately 230 kg, making them lightweight and easy to install and remove with small machinery, with a maximum capacity of 40 mats on a 10-ton truck. They also have advantages in terms of workability and transportation efficiency. Moreover, they offer added value that can only be achieved with wood, such as glare reduction, noise control, CO2 fixation, and consideration for aesthetics. This product is expected to be a new proposal for not only construction companies but also building material firms, lumber companies, and material trading companies. It is a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The use of wood is not limited to construction anymore. The utilization of Hyper CLT Mats is expanding as a new market that connects civil engineering and wood.

Fukuda Corporation has been pursuing leak detection for 60 years and is dedicated to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing performance. We will propose suitable testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This is a collection of links to Fukuda's technical columns. It covers various topics related to leak tests and more... Please check the related links for more information.

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.