Notice of Participation in "Monozukuri World Tokyo / Factory Equipment and Supplies Exhibition" (Teijin Frontier)

Using polyester nanofibers with a diameter of 700nm! It has good gas permeability and allows for low pressure loss operation!

The "Nano Front Bag Filter NFE Series" is a bag filter that uses polyester nanofibers with a diameter of 700nm as the filter medium. It offers good air permeability, enables low-pressure loss operation, and is expected to provide energy-saving and long-life effects. We can accommodate your desired sewing specifications. An electrostatic type is also available. 【Features】 ■ Efficiently collects dust and powders ■ Good air permeability and enables low-pressure loss operation ■ Expected energy-saving and long-life effects ■ Electrostatic type also available *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Filtration Equipment

I want to achieve energy conservation, cost reduction, and CO2 reduction in the factory. The answer is the "optimization of airflow" in the dust collector.

The unnecessary excess airflow of the dust collector can be automatically optimized for airflow, achieving energy savings through the introduction of inverter control.

• inverter
• Bag Filter

Introducing the dewatering agent "Furodehai," which reduces the moisture content of dewatered sludge and can decrease waste volume and sludge treatment costs!

The dehydration aid "Flodeha" is a special fiber composed of shortcut fibers. This product is designed to improve dehydration efficiency and reduce sludge generation by adding a small amount of it to the sludge generated during wastewater treatment and performing dehydration treatment. 【Features】 - The capillary phenomenon effect and water guiding effect of the fibers discharge moisture from the sludge to the outside. - Excellent dispersion of sludge due to the special processing of the fibers. - Customizable dehydration aid proposals tailored to each dehydration machine mechanism. - Improvement of sludge dehydration efficiency with a small addition (1-4% relative to total solids). 【Effects】 - Reduces moisture content and decreases sludge discharge amount → Example: Approximately 25% reduction in dewatered sludge discharge. - Reduces CO2 emissions during sludge incineration → Example: Approximately 32% reduction in CO2 emissions. *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

Achieving high flow rate, low pressure loss, high precision, and long lifespan with filter media featuring fine and uniform pore sizes. 【Exhibited at the New Functional Materials Exhibition】

The "Nano Front® Filter Cartridge" uses ultra-fine nanofibers as the filtering material. The fibers are fixed together by thermal bonding, without the use of adhesives or other foreign materials. Its extremely thin and uniformly fine pore structure simultaneously achieves high flow rates, low pressure loss, high precision, and long lifespan. It streamlines various liquid filtration processes and contributes to increased productivity. The filter material can also be selected according to the filtration target, making it suitable for various fields. 【Product Lineup and Applications】 ■ TNP Type (Made of Polypropylene) For strong acids, strong alkalis, solvents, chemicals, lubricants, general industrial water, etc. ■ TNN Type (Made of Nylon) For alkaline solutions, various organic and polar solvents, binders, various resins, etc. ■ TNE Type (Made of Polyester) For acidic solutions, pre-filters for pure water systems, general industrial water, brewing water, machine cutting fluids, etc. *For more details, please refer to the materials. ★ We will be exhibiting at a trade show! Trade Show Name: 15th Cosmetics Development Expo Tokyo / COSME Tech 2025 TOKYO Dates: January 15 (Wednesday) to 17 (Friday), 2025 Venue: Tokyo Big Sight Booth Number: C11-38

• Other filters

Reducing environmental impact and moving towards sustainable manufacturing. Processing water-soluble cutting oils and high-concentration oil-water waste at low operating costs, significantly reducing industrial waste.

Teijin Frontier sells "membrane units for wastewater and waste liquid treatment" that contribute to reducing the costs of wastewater and waste liquid treatment. By combining membranes tailored to the characteristics of the wastewater, such as high-concentration oil-water waste containing water-soluble cutting oils and lubricants, we achieve high treatment capacity. In addition to reducing treatment costs through the reuse and discharge of treated water, our system also contributes to reducing the workload by performing treatment and cleaning automatically. 【Features】 ■ Contributes to the reduction of industrial waste and waste treatment costs ■ Provides units according to treatment volume ■ Supports secondary treatment of concentrated water from existing wastewater treatment ■ Capable of stable operation for long periods in fully automatic mode * A PDF document with application examples is currently available. Please feel free to contact us for inquiries.

• Water treatment equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

We propose a new solution for filter cartridges!

We offer proposals for extending the lifespan of final filters. By using a nano front filter as a pre-filter, you can expect to extend the lifespan of your current final filter (membrane). If you provide us with your current final filter and pre-filter, we will conduct a benefit assessment. For more details, please contact us. 【Lifespan Extension / Effects】 <Nano Front Filter TNP010 (PP 1μm)> ■ Final Filter PES Membrane 0.1μm: Approximately 2 times ■ Final Filter PES Membrane 0.2μm: Approximately 12 times *For more details, please refer to the PDF document or feel free to contact us.

• filter
• Other filters
• Other contract services

Significantly enhanced performance of the aeration tank! A durable and long-lasting carrier for immobilized microorganisms.

Teijin Frontier's "Fiber Carrier for Wastewater Treatment" is a microbial fixation carrier with a three-dimensional structure created through innovative weaving of special fibers. It has an extremely large surface area, allowing for high-density retention of microorganisms, which can significantly enhance the performance of aeration tanks. By introducing it into existing biological treatment tanks (aeration tanks), it is expected to enable the treatment of high BOD wastewater. 【Features】 ■ Extremely large surface area, capable of retaining microorganisms at high density ■ Special structure that suppresses clogging of the carrier and moderate activated sludge adhesion for stable water treatment ■ Capable of retaining resistant bacteria for the decomposition of refractory organic matter and against substances that inhibit biological treatment ■ Excellent durability and long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Filtration Equipment

Achieving high flow rate, low pressure loss, high precision, and long lifespan with filter media featuring fine and uniform pore sizes.

The "Nano Front® Filter Cartridge" uses ultra-fine nanofibers as the filtering material. The fibers are fixed together by thermal bonding, without the use of adhesives or other foreign materials. With an extremely thin and uniformly fine pore size filtering material, it simultaneously achieves high flow rates, low pressure loss, high precision, and long lifespan. It streamlines various liquid filtration processes and contributes to increased productivity. The filter material can also be selected according to the filtration target. It is adopted in various fields. 【Product Lineup and Applications】 ■ TNP Type (Made of Polypropylene) For strong acids, strong alkalis, solvents, chemicals, lubricants, general industrial water, etc. ■ TNN Type (Made of Nylon) For alkaline solutions, various organic and polar solvents, binders, various resins, etc. ■ TNE Type (Made of Polyester) For acidic solutions, pre-filters for pure water systems, general industrial water, brewing water, machine cutting fluids, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other filters
• Filtration Equipment

Construction can be completed in a short period. Special fiber carriers allow for high-density retention of microorganisms, achieving high-efficiency treatment.

The "Unit-type Wastewater Treatment System" can be installed in a short period and with minimal space, offering high flexibility in layout. For the assembly of a 100m3 panel tank only, the construction period is approximately 10 days. Being a ground-mounted type makes it easy to check the condition and facilitates leak inspections. It employs a carrier made of special fibers with a three-dimensional structure, achieving a large surface area. This allows for the retention of a large and high-density population of microorganisms, enabling highly efficient treatment. [Examples of Use] ■ Increase in wastewater treatment capacity of existing facilities ■ Temporary wastewater treatment during construction periods ■ Temporary wastewater treatment during disasters *For more details, please refer to the materials. Feel free to contact us as well.

• Wastewater/wastewater treatment equipment

Easy installation with high disaster prevention performance! Protects against flooding from the entrance! Simple type water stop sheet 'Tomppa TM'

Flood prevention from the entrance, "Tomeppa" protects you! - No tools required, can be installed by one person: Easy installation without tools - Excellent water stop performance: Equivalent to JIS standard Ws-5 water stop performance - Affordable introduction cost: Significantly lower price compared to water stop board construction

• Other safety and hygiene products
• Other services

About ROAD: The "Roundtable on the Purpose of Autonomous Driving (ROAD)" conference series has evolved into a unique platform for interdis-ciplinary dialogue and international collaboration in the field of autonomous driving and autonomous mobility. Established in 2016, ROAD has brought together researchers, industry leaders, and public sector stakeholders from six countries across three continents. Based on this background, the upcoming ROAD 2026 will focus on "safety” and "driving AI”—the final pieces of the autonomous driving puzzle—to advance discussions on establishing the foundational framework for ensuring safety quality and obtaining regular-tory approval for autonomous driving. We also intend to discuss the international commonalities and differences regarding the social value brought about by ADS vehicles in terms of automation, intelligent driving, and mobility. We have established a total of five compelling themes for the Round Workshops, consisting of two topics related to “The Last Piece” and three topics related to the social value of ADS, as shown below. 1) Round Workshop 1 - Horizons of E2E Driving AI → Can AI Understand the Driving Environment Like Humans? 2) Round Workshop 2 - Beyond the Unknown: Safety Cases for ADS → Can Safety Ever Be Proven? 3) Round Workshop 3 - Envisioning Smart City Mobility → Can Smart City Mobility Bridge the Mobility Divide? 4) Round Workshop 4 - Logistics Enhancement Through Autonomous Tracking → Will Logistics Become Human-Free? 5) Round Workshop 5 - The Evolution of CASE: SDV/AIDV → Will Automakers Become AI Companies? We hope you’ll all join us!

[Speaker] Masashi Sugita, President and CEO of LEX Style Co., Ltd. [Key Lecture Content] The power consumption of AI servers used in data centers has significantly increased, making traditional air cooling insufficient for operation. This lecture will organize the requirements for introducing a liquid cooling system into air-cooled data centers and explain the implementation method using free cooling with specific design details. When handling high-density AI servers, energy efficiency is required, and the widely used energy efficiency indicator, as well as the Ministry of Economy, Trade and Industry's Resource and Energy Agency's PUE regulation of "1.3 or below," will be explained along with practical operational insights. [Lecture Items] 1. Heat dissipation methods for high-density, high-heat AI servers 2. Basics and importance of PUE/pPUE 3. PUE regulation of "1.3 or below" by the Ministry of Economy, Trade and Industry's Resource and Energy Agency 4. AI server implementation and requirements for new data centers 5. Summary and future outlook 6. Q&A / Business card exchange

[Key Lecture Content] 1. Promotion of SAF Introduction Yasushi Yamashita, Director, Carbon Neutral Promotion Office, Aviation Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Importance of SAF in the decarbonization of the aviation sector 2. Initiatives to promote the introduction of SAF 3. Q&A / Business card exchange 2. Japan Airlines' Challenge Towards Net Zero CO2 Emissions by 2050 Kazuki Hirotani, Group Leader, GX Planning Group, Sustainability Promotion Department, Japan Airlines Co., Ltd. 1. Introduction of our five initiatives for CO2 emission reduction 2. Initiatives for reducing fuel consumption (introduction of fuel-efficient aircraft, operational improvements) 3. Initiatives for fuel transition (sustainable aviation fuel SAF) 4. Initiatives for reductions outside the value chain (carbon credits, new removal technologies) 5. Initiatives to deepen collaboration with society 6. Q&A / Business card exchange

[Instructor] Yuichiro Kabushiki, Partner Lawyer at TMI Comprehensive Law Office [Key Lecture Content] With the spread of AI, there is growing attention on the civil liability of developers, providers, and users of AI. The Ministry of Economy, Trade and Industry will publish "Guidelines on the Interpretation and Application of Civil Liability in AI Utilization" in April 2026, and the Ministry of Justice will also establish an expert meeting to examine civil liability related to unauthorized use of images and voices generated by AI in the same month. As the full enforcement of the AI Promotion Act and the revision of AI guidelines are underway, it is necessary to design and operate governance based on the potential responsibilities that may arise retrospectively. In this seminar, based on the guidelines from the Ministry of Economy, Trade and Industry and drawing on litigation practice experience as a judge and lawyer, we will organize the basic framework for assessing civil liability and explain fundamental methods for designing and operating governance based on risk analysis. Furthermore, we will examine the framework for civil liability and the design and operation of governance using hypothetical cases that are likely to pose practical issues.

In this seminar, we will welcome Mr. Satoru Hayami from Waseda University, who will explain the latest trends in AI utilization in manufacturing, as well as the evolution of technologies such as agent-based AI and physical AI, and the opportunities and key points for practical application in the manufacturing industry. Furthermore, Mr. Tsubasa Shibata, representative of Next Opt, will introduce processes aimed at practical implementation, incorporating actual case studies from manufacturing sites. We hope you will envision the "potential for AI utilization in your company" and take home hints that will lead to improvements in your operations starting tomorrow. We look forward to your participation.