Free e-learning program "Basics of Plastic Molding"

We have a variety of series of plunger nozzles available!

This catalog features the "Plagate Nozzle" products from a company that handles hot runner molding equipment, LIM molding equipment, static eliminators, and more. It includes the "NH Series," which uses resin pressure and springs as power, the "AH Series," which enhances the fluidity of resin near the gate and has low residual stress, and the "GH Series," which pursues versatility and demonstrates effectiveness in various scenarios. [Contents] ■ Plagate Nozzle Products ■ Plagate Nozzle Parts *For more details, please contact us or download the catalog.

• nozzle
• Injection Molding Machine

Hot runner molding equipment that makes it easy to adjust weld lines and set up both large and small products.

The "VS Series" is a plunger gate air valve that allows for the adjustment of the opening and closing timing of each gate using a timing controller. The air cylinder is designed to be removable as a unit, and since it uses tubes and fittings for air piping, it offers excellent maintainability. With a wide variety of nozzle sizes and gate sizes available, it enhances productivity for molded products across a broad range of fields. 【Features】 ■ Stable quality reproducibility ■ Simplification of mold processing ■ Beautiful gate appearance quality ■ Good color changeability ■ Excellent maintainability *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• valve
• Other molds

FISA's unique valve nozzle!

This series is a plaguate nozzle that can enhance the fluidity of resin near the gate. The special shape of the piston tip ensures a reliable sealing mechanism for the gate, preventing any backflow of resin from the cavity. Additionally, it is maintenance-free and allows for long-term molding. 【Features】 ■ Prevention of resin backflow ■ Capability for long-term molding ■ Adoption of a unique opening and closing mechanism ■ Simple structure *For more details, please contact us or download the catalog.

• Other machine elements
• Injection Molding Machine

FISA's unique gate opening and closing system!

This series is a plunger gate nozzle powered by resin pressure and springs. It can be integrated into molds for thermoplastic resin injection molding, eliminating waste from sprues and runners during molding. Additionally, the nozzle mechanism adopts a unique valve gate system from FISA that automatically opens and closes the gate using resin pressure as power, without the need for external drive devices. 【Features】 ■ Good gate balance ■ Beautiful gate finish ■ The nozzle can be set at any angle *For more details, please contact us or download the catalog.

• Other machine elements
• Injection Molding Machine

Injection flow control unit that can be widely introduced to plug gates and open-type hot runners.

The "RCSS18" is a hot runner molding device that can be easily assembled to the manifold, allowing for simple adjustment of the resin flow rate at each gate. Pursuing our fundamental development concept of "anyone can use it easily and with versatility," we focused on the ability to vary the outflow rate. It can be widely implemented not only in a plastic gate system but also in open-type hot runners, contributing to the overall cost reduction related to molds, including hot runners. 【Features】 ■ Easy adjustment of flow rate at each gate with just one wrench ■ Durable due to its simple structure ■ Suitable distribution of resin volume with large and small set takes and family molds ■ Easy movement and adjustment of weld positions ■ No need for auxiliary equipment such as dedicated controllers *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Injection Molding Machine

Prevent scorching caused by residual resin materials! A hot runner molding device that achieves runnerless molding at a low cost.

The "GTH Series" is a plunger gate open nozzle that can suppress injection defects caused by gate clogging and the occurrence of cold slugs. Thanks to the effect of the built-in special chip, it reduces stringing and dripping. Direct gate settings to molded products are possible. It has a low number of parts, excellent maintainability, and is easy to integrate into molds. 【Features】 ■ Eliminates issues unique to open nozzles ■ Structure with no stagnant areas ■ Clean gate finish ■ Simple structure ■ Achieves runnerless molding at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other machine elements
• Other molds

Achieved complete runnerless design for super engineering plastics and biomass plastics, which have been considered difficult to convert to hot runner systems!

The "SEPT" hot runner system, compatible with super engineering plastics, significantly improves the long-standing issue of "uneven temperature distribution in nozzles" through a patented heating technology, making it suitable for resins with narrow temperature ranges, such as super engineering plastics and biomass plastics. By using wear-resistant materials for the parts, it can also reduce gate wear when working with glass fiber-reinforced resins. Additionally, by minimizing the size of the cylinder, it enables independent control of each gate with a minimum gate pitch of 30mm. Despite its compact design, the cylinder achieves a gate sealing force 3.5 times greater than conventional models by utilizing an oval shape and a double structure. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic Mould
• Injection Molding Machine

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

Yazaki Energy System will be exhibiting at the "14th Agricultural WEEK (commonly known as J-AGRI)" held at Makuhari Messe. In response to challenges surrounding agriculture, such as record heat and soaring energy prices, our company proposes an agricultural system that utilizes surplus solar heat and waste heat from factories during the summer to support stable cultivation throughout the year, from winter heating to summer cooling. ■ Exhibition Details (Booth Number: 25-47) <Closed-type Agricultural House> Results from the second season and initiatives for the third season <Localized Cooling in Solar-Powered Agricultural Houses> Mechanism of substrate cooling, comparison of energy consumption with spatial cooling, growth conditions this summer <Cooling and Heating with Solar Heat> Examples of crown heating and house cooling, utilization of surplus heat in summer <Cooling of Crops and Workers with Well Water> Exhibition of a prototype well water cooler and proposals for the use of cooling jackets When you visit, please be sure to stop by our booth.

We would like to inform you about the autumn and winter internship opportunities for the 2028 graduates. 1. Open Company Dates: October 23, 2026 (Friday), November 11, 2026 (Wednesday), December 10, 2026 (Thursday), January 21, 2027 (Thursday) Time: 13:30 - 15:30 Location: Online (Microsoft Teams) 2. 1-Day Job Experience Dates: November 17, 2026 (Tuesday), December 16, 2026 (Wednesday) January 15, 2027 (Friday), January 27, 2027 (Wednesday), February 4, 2027 (Thursday), February 10, 2027 (Wednesday), February 18, 2027 (Thursday) Time: 10:00 - 17:30 (tentative) Location: Takaya Corporation Headquarters (661-1 Ibara-cho, Ibara City, Okayama Prefecture)

Notice of participation in the "FOOD Expo 2026." 【Date and Time】 　November 11 (Wednesday) - 13 (Friday), 2026 　Opening hours: 10:00 AM - 5:00 PM 【Venue】 　Tokyo Big Sight 　East Hall 2, Booth Number B-36 【Exhibits】 　Cardboard insulated boxes 　Craft cooler cubes 　Vacuum insulated panel 　Pallet cubes

[Lecture Topics] 1. Co-creation Strategy to Deliver AI to the Field - Business Development and Joint Ventures in the Era of Generative AI and Physical AI Mr. Haruto Suzuki, Industrial and Regional Research Department, Development Bank of Japan 1. The Mechanism of Generative AI and Its Current Utilization by Companies 2. Expansion of the Generative AI Market and AI Infrastructure 3. Transition from Generative AI to Physical AI 4. Bottlenecks in Social Implementation and Solutions through Joint Ventures 5. Formation of an Implementation Ecosystem through Policy and Finance 6. Q&A / Business Card Exchange 2. Needs, Development Trends, Future Possibilities, and Challenges of Physical AI Mr. Kazushi Asama, Senior Researcher, Next-Generation Robot Research Organization, Waseda University / Emeritus Professor, University of Tokyo 1. What Physical AI Means 2. Needs for Physical AI and the Technological Trends of Generative AI Behind It 3. Development Trends of Physical AI 4. Future Possibilities and Challenges of Physical AI 5. Q&A / Business Card Exchange