Notice of Participation in the 'Sewage Exhibition 2024 Tokyo' (Teijin Frontier) from July 30, 2024 (Tuesday) to August 2, 2024 (Friday)

Construction can be completed in a short period. Special fiber carriers allow for high-density retention of microorganisms, achieving high-efficiency treatment.

The "Unit-type Wastewater Treatment System" can be installed in a short period and with minimal space, offering high flexibility in layout. For the assembly of a 100m3 panel tank only, the construction period is approximately 10 days. Being a ground-mounted type makes it easy to check the condition and facilitates leak inspections. It employs a carrier made of special fibers with a three-dimensional structure, achieving a large surface area. This allows for the retention of a large and high-density population of microorganisms, enabling highly efficient treatment. [Examples of Use] ■ Increase in wastewater treatment capacity of existing facilities ■ Temporary wastewater treatment during construction periods ■ Temporary wastewater treatment during disasters *For more details, please refer to the materials. Feel free to contact us as well.

• Wastewater/wastewater treatment equipment

Significantly enhanced performance of the aeration tank! A durable and long-lasting carrier for immobilized microorganisms.

Teijin Frontier's "Fiber Carrier for Wastewater Treatment" is a microbial fixation carrier with a three-dimensional structure created through innovative weaving of special fibers. It has an extremely large surface area, allowing for high-density retention of microorganisms, which can significantly enhance the performance of aeration tanks. By introducing it into existing biological treatment tanks (aeration tanks), it is expected to enable the treatment of high BOD wastewater. 【Features】 ■ Extremely large surface area, capable of retaining microorganisms at high density ■ Special structure that suppresses clogging of the carrier and moderate activated sludge adhesion for stable water treatment ■ Capable of retaining resistant bacteria for the decomposition of refractory organic matter and against substances that inhibit biological treatment ■ Excellent durability and long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Filtration Equipment

Introducing the dewatering agent "Furodehai," which reduces the moisture content of dewatered sludge and can decrease waste volume and sludge treatment costs!

The dehydration aid "Flodeha" is a special fiber composed of shortcut fibers. This product is designed to improve dehydration efficiency and reduce sludge generation by adding a small amount of it to the sludge generated during wastewater treatment and performing dehydration treatment. 【Features】 - The capillary phenomenon effect and water guiding effect of the fibers discharge moisture from the sludge to the outside. - Excellent dispersion of sludge due to the special processing of the fibers. - Customizable dehydration aid proposals tailored to each dehydration machine mechanism. - Improvement of sludge dehydration efficiency with a small addition (1-4% relative to total solids). 【Effects】 - Reduces moisture content and decreases sludge discharge amount → Example: Approximately 25% reduction in dewatered sludge discharge. - Reduces CO2 emissions during sludge incineration → Example: Approximately 32% reduction in CO2 emissions. *For more details, please refer to the PDF document or feel free to contact us.

• Other filters

Achieving high flow rate, low pressure loss, high precision, and long lifespan with filter media featuring fine and uniform pore sizes. 【Exhibited at the New Functional Materials Exhibition】

The "Nano Front® Filter Cartridge" uses ultra-fine nanofibers as the filtering material. The fibers are fixed together by thermal bonding, without the use of adhesives or other foreign materials. Its extremely thin and uniformly fine pore structure simultaneously achieves high flow rates, low pressure loss, high precision, and long lifespan. It streamlines various liquid filtration processes and contributes to increased productivity. The filter material can also be selected according to the filtration target, making it suitable for various fields. 【Product Lineup and Applications】 ■ TNP Type (Made of Polypropylene) For strong acids, strong alkalis, solvents, chemicals, lubricants, general industrial water, etc. ■ TNN Type (Made of Nylon) For alkaline solutions, various organic and polar solvents, binders, various resins, etc. ■ TNE Type (Made of Polyester) For acidic solutions, pre-filters for pure water systems, general industrial water, brewing water, machine cutting fluids, etc. *For more details, please refer to the materials. ★ We will be exhibiting at a trade show! Trade Show Name: 15th Cosmetics Development Expo Tokyo / COSME Tech 2025 TOKYO Dates: January 15 (Wednesday) to 17 (Friday), 2025 Venue: Tokyo Big Sight Booth Number: C11-38

• Other filters

We propose a new solution for filter cartridges!

We offer proposals for extending the lifespan of final filters. By using a nano front filter as a pre-filter, you can expect to extend the lifespan of your current final filter (membrane). If you provide us with your current final filter and pre-filter, we will conduct a benefit assessment. For more details, please contact us. 【Lifespan Extension / Effects】 <Nano Front Filter TNP010 (PP 1μm)> ■ Final Filter PES Membrane 0.1μm: Approximately 2 times ■ Final Filter PES Membrane 0.2μm: Approximately 12 times *For more details, please refer to the PDF document or feel free to contact us.

• filter
• Other filters
• Other contract services

New Operation Adjustment Method in Drainage Treatment Maintenance Management: 'The Introduction of SACRA Enables More Reliable Operation Management Adjustments'

By utilizing ICT, we provide constant support for maintaining proper operation and streamline the maintenance management of wastewater treatment, making it less labor-intensive and unmanned. Challenges in traditional maintenance management: - Spot measurements may indicate proper operation, but in reality, it can be different, leading to unknown causes and deterioration in treatment. - Although trends are visualized, they can only be seen on-site, resulting in delayed responses and worsening treatment. ◆ Anytime Monitoring is possible whenever you think of it. By using the cloud, you can utilize the service without special capital investment. The monitoring center can oversee operations on your behalf even at night. ◆ Anywhere With the use of the cloud, monitoring is possible anywhere as long as you have a connected device (computer, tablet, smartphone). You can quickly check the status even while out, allowing for efficient responses. ◆ Anyone All stakeholders can share information. In the context of an aging population and declining numbers, this helps in the necessary technology transfer to maintain quality without excessive costs in maintenance management. "SACRA" is a trademarked product of Estem Co., Ltd.

• Other services

An evolved version of fiber materials that enables high-speed filtration! The fibers are less likely to break down even during backflow!

Teijin Frontier's "filter material" is a fiber chip that removes SS (suspended solids) from wastewater. Previous filter materials had the issue of fiber collapse during backflow, but Teijin Frontier's "filter material" has improved this problem. 【Features of Downflow Filter Material】 ■ Significantly improved fiber shedding rate during filtration (1/6 of existing materials) ■ High heat resistance achieved through special raw cotton specifications (usable at 60-70°C) 【Features of Upflow Filter Material】 ■ Improved fiber shedding rate during filtration ■ Enhanced backwashing capability due to the blending of special raw cotton *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Filtration Equipment

Easy installation with high disaster prevention performance! Protects against flooding from the entrance! Simple type water stop sheet 'Tomppa TM'

Flood prevention from the entrance, "Tomeppa" protects you! - No tools required, can be installed by one person: Easy installation without tools - Excellent water stop performance: Equivalent to JIS standard Ws-5 water stop performance - Affordable introduction cost: Significantly lower price compared to water stop board construction

• Other safety and hygiene products
• Other services

A revolutionary fiber that combines "water absorption" and "moisture absorption" functions.

"Bell Oasis®" is a revolutionary fiber that has the ability to absorb approximately 80 times its own weight in water and to absorb moisture from the atmosphere equivalent to about 100% of its own weight (at 20°C and 90% RH), combining the functions of "water absorption" and "moisture absorption." <Features> - High water absorption capacity - High water retention (difficult to release even under pressure after absorption) - Water absorption can be controlled through design - Large moisture absorption, particularly high moisture absorption rate under high humidity (approximately 100% moisture absorption rate at 20°C and 90% RH) - Also has moisture release function, allowing for humidity adjustment according to the environment - High moisture absorption and release rates *For more details, please download the PDF or contact us.

• fiber

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.