New release of the Wi-Fi/USB compatible CAN2.0B communication unit "CAN-2-WF" for CAN communication via wireless LAN.

Converter unit compatible with wireless LAN and USB, expanding high-speed CAN communication capabilities. For automotive diagnostics/ECU programming!

This product is a converter unit that expands CAN communication capabilities via wireless LAN or USB. It complies with CAN 2.0B communication and supports a maximum communication speed of 1 Mbps. It is equipped with a USB Type-C port, allowing operation via USB. It is compatible with the SAE J2534 diagnostic protocol for automotive ECUs and can be used as a communication interface during vehicle maintenance diagnostics and ECU programming. 【Main Specifications】 ■ Bus Specifications: USB, Wi-Fi ■ Connector Used: D-SUB 9-pin (male) ■ Number of Channels: 2-ch ■ Communication Standard: CAN 2.0B (active) ■ Communication Speed: ~ 1 Mbps (CAN 2.0B) ■ Supported OS: Windows 11 (64-bit), Windows 10 (64-bit), Windows 10 (32-bit)

• converter
• Other Auto Parts
• Instrumentation and Control Systems

A PCI Express bus-compatible CAN communication board that can extend CAN communication functionality to a computer, perfect for use in automotive parts inspection!

This product is a PCI Express bus-compatible board that extends CAN communication functionality to a computer. The CAN-4P-PE complies with CAN2.0B communication and supports a maximum communication speed of 1 Mbps. The CAN-4PF-PE complies with both CAN2.0B communication and the extended format of CAN FD communication, enabling data communication at speeds of up to 5 Mbps. It is designed for use in automotive parts inspection within factories and features four channels of CAN communication ports that can handle multiple parts inspections simultaneously, with each channel independently isolated. 【Main Features】 ● CAN2.0 communication and CAN FD communication functionality ● Isolation between CAN communication channels and bus isolation from the computer ● Individual buffers for each transmission and reception ● Isolation between channels and between the computer, with surge protection for signal lines ● Configurable termination resistors ● Includes channel distribution cable ● Device drivers compatible with Windows are provided

• Other inspection equipment and devices
• controller
• Expansion Boards

Compliant with CAN2.0B communication, it can expand CAN communication functionality to a computer via USB! Usable as a communication device for automotive parts inspection and ECU testing.

The CAN communication unit is a CAN/USB converter unit that connects to a computer's USB port to extend CAN communication capabilities. It complies with the CAN 2.0B communication standard and supports communication speeds of up to 1 Mbps. It features a USB Type-C port and can operate via bus power from the host. It is compatible with the SAE J2534 diagnostic protocol for automotive ECUs, allowing it to be used as a diagnostic tool during vehicle maintenance and as a communication interface during ECU programming. Additionally, it provides an API for low-level data transmission and reception, making it suitable as a CAN communication device for automotive parts inspection and ECU testing. 【Features and Specifications】 ■ Expansion Module Bus Specification: USB Connector Used: D-SUB 9-pin (Male) ■ CAN Communication Number of Channels: 2-ch Communication Standard: CAN 2.0B (Active) Communication Speed: ~ 1 Mbps (CAN 2.0B) Isolation Specification: Channel-to-channel isolation; Bus isolation ■ Supported OS Supported OS: Windows 11 (64-bit); Windows 10 (64-bit); Windows 10 (32-bit)

• Other inspection equipment and devices
• Defect Inspection Equipment
• Expansion Boards

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.