Notice of the Garden Renovation Exhibition at Yume Messe

An original gate made to order with high seismic resistance, featuring a steel frame structure and wooden structure.

"FIT GATE" is an original gate made to order, featuring a steel frame structure combined with a wooden structure for high seismic resistance. [About the Design] There are no fixed sizes or shapes for FIT GATE. We can create large gates that integrate passage gates and shutter gates, as well as gates tailored to the shape of the site. It is also possible to incorporate irregularities, slit processing, curves, and embedded decorative items. [About Installation] The gates are sent directly to the site in a completed form with waterproofing applied up to the base, leaving only the finishing work to be done on-site, which can be completed the same day. For large gates, they are manufactured in sections and assembled on-site. Installation takes a few hours to about a day to complete. After the structure is installed, the contractor will finish the wall materials and electrical work, completing the gate. This contributes to reducing the workload on-site and shortening the construction period. *For more details, please refer to the PDF materials or feel free to contact us.

• others

A modern Japanese-style roof gate that is widely used as an entrance gate for apartments and accommodation facilities.

"FIT Entrance" is a modern Japanese-style gate that combines the gabled and hipped roofs of a traditional Japanese-style gate, "Sukiya Gate," with the seismic-resistant original structure of "FIT GATE." It is widely adopted for entrance gates of commercial facilities, including apartments and accommodation facilities. The waterproof base is applied within the factory, and it is delivered directly to the site as a single unit or in split components. The split components are connected during installation. The installation time is short, ranging from a few hours to one day. This not only maintains quality but also reduces the workload on-site and shortens the construction period. 【Features of FIT Entrance】 ■ A Japanese-style gate that fits modern architecture ■ The image changes depending on the finishing work ■ Combines wooden structure with steel frame for high seismic performance ■ Stable high quality through consistent manufacturing ■ Completed form with waterproof base is shipped directly to the site ■ Can be finished with preferred options like painting or tiling ■ A one-of-a-kind original gate in the world *For more details, please refer to the PDF materials or feel free to contact us.

• Municipal services and business location

A seismic-resistant roof gate created with a gabled and hipped roof of a sukiya-style gate and a FIT structure. Depending on the finishing method, it can create both a Japanese and a Western atmosphere.

The "FIT Entrance Gate" is a modern original roof gate that combines the authentic Japanese-style gate "Sukiya Gate" with the original seismic-resistant gate "FIT GATE." It can be used in various situations, such as personal residence access gates, Japanese-style shutter gates, and entrance gates for apartments and commercial facilities. The waterproof base is applied within the factory, and the completed form is shipped directly to the site, allowing installation to be completed on the same day. For large structures, the roof and columns are manufactured separately and connected on-site. After installation, the finishing work is done by the contractor, ensuring high quality while reducing the workload and shortening the construction period. **Features of the FIT Entrance Gate:** - A Japanese-style gate that suits modern architecture - The image changes depending on the finishing work - Combines wooden structures with steel frames to achieve high seismic performance - Consistent manufacturing for stable high quality - Completed forms with waterproof bases are shipped directly to the site - Can be finished with preferred options such as painting or tiling - A one-of-a-kind original gate in the world *For more details, please refer to the PDF document or feel free to contact us.*

• others

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It limits the maximum protrusion of the angle support on the site side to approximately 65mm, allowing for passage even after installation, thus maintaining convenience in narrow lots and densely populated residential areas. Additionally, it enables a single worker to perform tightening operations from the site side, which can shorten construction time. *The model compatible with the perennial wall is made to order. Please allow about one month for manufacturing and delivery. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the site-side angle post to approximately 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. It is also compatible with perennial walls. *Please inquire about delivery times as this is a made-to-order product. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained for "reinforcement structure and reinforcement materials for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF document or feel free to contact us.

• others

High seismic resistance and free design! Achieving complete waterproofing and rot-resistant wooden structure!

"FIT GATE" is an original gate that enables high seismic performance and flexible design. It can be used in various situations, such as entrance gates for private residences, shutter gates, and entrance gates for apartments and commercial facilities. The gates are shipped directly to the site with waterproofing applied in the factory, allowing for installation to be completed on the same day. After installation, finishing work is carried out by the contractor, ensuring high quality while reducing the workload and shortening the construction period. 【Features of FIT GATE】 ■ Combines a wooden frame with a steel structure to achieve high seismic performance ■ Consistent manufacturing ensures stable high quality ■ Ships the completed form with waterproofing directly to the site ■ Allows for preferred finishes such as painting or tiling ■ A unique original gate, one of a kind in the world *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

[Lecture Topics] 1. Trends and Business Opportunities in Japan's Expanding Energy Storage Industry Koichiro Danno, Principal and Head of Social and Policy Design Unit, Research and Consulting Division, Japan Research Institute, Inc. 1. Background Necessitating Energy Storage Business 2. Behind the Meter (BTM) Business and In Front of the Meter (IFM) Business 3. Trends in Japan's Energy Policy Related to Energy Storage 4. Current Revenue Models in Japan 5. Verification of Profitability in Energy Storage Business 6. Summary 7. Q&A 2. Expansion of Grid-Scale Energy Storage Business in Europe and Japan and Future Prospects Takayuki Ogawa, Executive Officer, Deputy Head of Business Strategy Division, Japan Kogyo Energy Solutions, Inc. and Executive Director, Nippon Koei Energy Europe B.V. 1. Overview of the Company and Introduction to Energy Business 2. Efforts in Energy Storage Business in Europe 3. Efforts in Energy Storage Business in Japan 4. Role and Importance of Aggregators 5. Challenges and Future Prospects of Grid-Scale Energy Storage Business 6. Summary 7. Q&A