The product page for 【Suntool】 has been newly added with the 【Collaboration Proposal】 featuring a PUR adhesive that combines flexibility and heat resistance!

Introducing Toyo Chem Co., Ltd.'s new product! PUR adhesive!

While being PUR, it has adhesive properties, demonstrates adhesion under various environmental conditions, and allows for coating with various application patterns. - "PUR adhesive sheet" that has adhesive properties while being PUR - "Heat-resistant PUR-HM adhesive" with high heat and cold resistance - "Functional optical PUR adhesive" usable in various temperature ranges 【Features】 ■ Has flexibility and durability ■ Low melt viscosity ■ Can be applied at low temperatures ■ Reduces damage to materials *For more details, please refer to the related links or feel free to contact us.

• glue

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

The "Curtain Spray Coating System" is a product that can uniformly apply hot melt in a fibrous form without contact. It enables seamless and even application on wide materials, which is difficult with conventional spray coating, and allows for thin application as well. It minimizes the consumption of hot melt adhesives and is adopted in a wide range of industries, including the filter and building materials sectors. *Uniform micro-particle coating is also possible with liquids other than hot melt (such as chemicals, fragrances, oils, etc.). 【Features】 ■ Allows for uniform application of small amounts of hot melt ■ Capable of applying a soft texture ■ Sharp edges at both ends of the application width ■ Minimal scattering due to application ■ Hot melt can be applied in a fibrous form *For more details, please refer to the PDF document or feel free to contact us. 【Adoption Results】 ■ Numerous major manufacturers ■ Building materials and spray laminate industries ■ Filter industry ■ Sites where the cost of hot melt is high

• Other mounting machines
• Painting Machine
• spray

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

The "Curtain Spray" is a device that utilizes the cohesion and viscosity of hot melt adhesive to extrude fine fibers and uniformly apply a thin film in a non-woven fabric manner. It can spray coat in a single unit even for wide widths. Additionally, in the case of liquids (chemicals, fragrances, oils), it can atomize them into fine particles. 【Features】 ■ Soft finish with breathability, uniform coating weight, and beautifully even coating ■ Reduction in the amount of hot melt adhesive used, resulting in cost benefits ■ Compatible with adhesives ranging from high viscosity to low viscosity ■ Environmentally friendly / recycling measures * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Use】 ■ Building materials, seals ■ Films, spray lamination ■ Non-woven fabrics, filters

• Other mounting machines

There are methods for applying with tension between rolls and on-roll application, allowing for continuous/intermittent (partial application) depending on the purpose!

This is a method for applying hot melt adhesive in a uniform width, over a surface, or in stripes. There are methods for applying it under tension between rolls and on-roll application, which can be continuous or intermittent (partial application) depending on the purpose. 【Features】 ■ Coater head for contact-type application ■ The application pattern can be arbitrarily set according to the shim pattern. ■ High-speed intermittent adhesion is possible, accommodating adhesives from high viscosity to low viscosity. ■ Beautiful coating with thin film adhesion. ■ There are measures to prevent winding during application and to address clumping of hot melt adhesives (using hot air). * For more details, please download the PDF or feel free to contact us.

• Painting Machine
• spray
• Other painting machines

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! New adhesive (coating agent).

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ In addition to beads, surface coating is also possible, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

• Other assembly machines

Achieve stable precision coating! Line drawing and dot placement pattern formation nozzle.

The "bead nozzle" is a small nozzle suitable for applying thin lines (beads) and dot applications. It is manufactured with high precision, allowing for extremely low variation between nozzles even in multi-line applications, enabling stable coating, which is why it is used in many industrial machines. By bringing the nozzle closer to the substrate, high-cut multi-line intermittent application is also possible. 【Features】 - Ideal for line (bead) and dot patterns, capable of multi-line intermittent application - Achieves stable coating, providing a uniform and beautiful finish - Reduces product waste, improves productivity, and offers cost benefits *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 - Filling - Molding - Filters - Automotive parts - Refrigerators - Building materials - Packaging - Bookbinding

• Other mounting machines
• Painting Machine
• Other painting machines

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Features】 ■ Nitrogen gas is mixed with hot melt adhesive, transforming it into a foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ Easy adjustment of foaming ratio. ■ Unique design by Santool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ Enables surface coating in addition to bead application, diversifying applications. ■ Foaming the hot melt allows for application with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. ■ By inputting the desired foaming ratio, anyone can create foam (no complicated operations required). * For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Filling for home appliances ■ Seals ■ Filters ■ Container gaskets

• Other assembly machines

A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Sample Distribution】We are currently distributing application samples. Please check the end of the article for details. The 'CF Series (Foam-Compatible Type)' is a touch panel type melter (applicator). Foam expansion ratios can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foam expansion ratios from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types 【Lineup】 ■ CF08 ■ CF30 ■ CF60 ■ CF120 【Applications/Examples of Achievements】 *For more details, please refer to the PDF materials or feel free to contact us. For a limited time, we will send application samples only to companies that inquire! Please feel free to contact us!

• Painting Machine

Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

The "CF Series (Foaming Compatible Type)" is a touch panel type melter (applicator). The foaming ratio can be easily controlled from the touch panel. It is also possible to discharge hot melt (adhesive) in a solid (non-foaming) state. The power capacity varies depending on the specifications. 【Features】 ■ Touch panel type ■ Easy control of foaming ratio from the touch panel ■ Discharge in solid (non-foaming) state is also possible ■ Available in 8L, 30L, 60L, and 120L types * For more details, please refer to the PDF materials or feel free to contact us. 【Lineup】 ■ CF08, CF30, CF60, CF120

• Painting Machine

A stable coating method that can be applied non-contact when you want to apply a thin and wide layer for product bonding! Regardless of low or high speed, it achieves minimal splatter and beautiful uniform coating!

The "Spiral Spray" is a method of applying hot melt in a spiral fiberized form onto the substrate. It achieves beautiful spiral application with minimal scattering, regardless of low or high speeds. It is also possible to apply using a foaming machine for foamed spirals. 【Features】 ■ Soft finish with a pleasant texture and breathability ■ Reduces waste/loss of hot melt adhesives ■ Solvent-free/low-solvent for environmental/recycling measures ■ High-speed intermittent adhesion is possible. The spiral can accommodate up to 72,000 rotations per minute, with a width of approximately φ15–20mm. 【Features of the nozzle with secondary air】 ■ The guide air stabilizes the pattern, and the clean air protects the nozzle, significantly reducing maintenance without foreign matter adhesion. ■ Spiral application of high-viscosity hot melts, which was difficult with conventional methods, is now possible. * For more details, please refer to the PDF document or feel free to contact us. 【Applications/Examples of Achievements】 ■ Non-woven fabrics ■ Films ■ Filters

• Painting Machine
• spray
• Other painting machines

This document introduces case studies of problem-solving related to the "dispenser coating equipment" that we handle.

A simple and multifunctional small dispenser allows for the replacement of the head to change various application patterns. 【Features】 ■ Various applications possible with head replacement ■ Simple mechanism and maintenance-free ■ Enhanced convenience with a wide range of options ■ Also available for reactive hot melt (DP300P) ■ Compatible with adhesives from high viscosity to low viscosity ■ Widely used for bonding and filling small boxes ■ Systems that can be mounted on robots are also available *For more details, please download the PDF or feel free to contact us. We would like to introduce an example of how various companies have adopted these features.

• Painting Machine
• Other painting machines

Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings are possible with head replacement - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300) *Options - Aluminum can preheater *For more details, please download the PDF or feel free to contact us. 【Applications/Examples】 ■ Packaging of small boxes ■ Coating on circuit boards ■ Electronic components

• Other processing machines

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32