Notice of Participation in JIMTOF 2024

High-speed measurement suitable for 100% inspection! It is possible to correlate EOL test equipment and data.

The "NVHG-EAR" is a testing machine that evaluates surface defects, machining distortions, and abnormal noise behavior in individual components by testing gears under high-speed and high-torque conditions. It operates based on the principle of a single-tooth surface test, where one master gear meshes with the component being inspected, detecting defects in both macro and micro shapes that can cause gear whine and noise phenomena. With a robust granite base frame that is unaffected by external interference and advanced software that allows for high-level settings, it can correlate EOL (End of Line) testing equipment and data. 【Features】 ■ Individual gear single-tooth surface/noise testing ■ Suitable for both gear testing environments and machining sites ■ Maximum rotational speed of 3000 rpm and maximum torque of 40 Nm during testing ■ Good correlation with gear testing analysis equipment and EoL testers ■ High-speed measurement suitable for 100% inspection *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

A system designed for operators at the work site to use simply and easily!

The "M62 DF Micro" is a precision measuring device designed for double flank inspection of spur gears and helical gears with a pitch diameter of 20 to 120 mm. This system is designed to be simple and easy for operators in the workplace to use. General parameters can be quickly evaluated through numerical and graphic displays on the E9066T industrial computer. [Features] - Designed for operators in the workplace to use simply and easily - General parameters can be quickly evaluated through numerical and graphic displays on the E9066T industrial computer - Option: Additional base structure for gears with a pitch diameter of 120 to 300 mm *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The display format is simple and easy to operate! You can create programs for the operating cycle in an interactive format.

"BLU" is an innovative modular machine tool monitoring/process control system. This system is the result of 50 years of experience in managing and optimizing machine tool work processes. It consists of a series of connected functional nodes. These functional nodes form a unique network using a single bus managed by a master node, and are typically installed within the machine's cabinet. 【Features】 ■ Interactive creation of operating cycle programs ■ Simple display format and easy operation ■ Composed of a series of connected functional nodes ■ The result of 50 years of experience in managing and optimizing machine tool work processes ■ Designed to maximize integration with machine tools *For more details, please refer to the PDF materials or feel free to contact us.

• Other process controls

For industrial machinery! A wide range of solutions designed for use with various types of equipment.

This catalog is the product catalog for the modular control system 'BLÚ LT' for machine tools, handled by Marpos Co., Ltd. It includes the "System Overview," examples of "Configuration" for 4-slot masters and 2-slot masters, and information about "Master Units." Please feel free to download and take a look. [Contents] ■ System Overview ■ Configuration Examples ■ Master Units ■ Fieldbus ■ ME Nodes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other process controls

It is possible to measure various diameters within the set measurement range! No special zero setting is required.

Our company has developed the 'PROTOMAR' diameter measurement head to meet the increasing quality demands in the manufacturing of medium to large workpieces such as brooches, railway vehicle axles, printing rolls, and milling rollers, used both during and after the grinding process. A major feature is that it is a gauge for absolute value measurement. Therefore, there is no need for special zero-setting; it can measure various diameters within the set measurement range simply by calibrating with a known master. The measurement range is set according to the type and dimensions of various workpieces. 【Features】 ■ Gauge for absolute value measurement ■ No need for special zero-setting ■ Capable of measuring various diameters within the set measurement range ■ Set according to various workpiece types and dimensions ■ Accuracy and repeatability errors are minimized to the absolute minimum *For more details, please refer to the related link page or feel free to contact us.

• Grinding Machine
• Other measurement, recording and measuring instruments

Ideal for use in various types of grinding environments! Easy to operate and maintain.

Contact measurement is an ideal solution for process control applications in grinding machines. The 'UNIMAR' measurement head is a combination of traditional pre-process/in-process/post-process gauges. It serves as a fundamental component when configuring applications within the machine. With a wide range of models available, it can be used for various types of applications while maintaining excellent measurement performance specifications. Additionally, this product is ideal for use in various types of grinding environments. These measurement heads are designed for easy operation and maintenance, making them accessible for anyone to use. 【Features】 - Ideal for use in various types of grinding environments - Designed for easy operation and maintenance - Supports various types of applications while maintaining excellent measurement performance specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Grinding Machine
• Other measurement, recording and measuring instruments

Display measurement results at hand! Reliable measurements can be made even in harsh field environments.

The "i-Wave2" is a rechargeable wireless handle equipped with a 1.8 TFT color screen. Thanks to its automatic screen rotation, operators can intuitively recognize measurement values from any direction on the graphical 1.8 TFT color display. Additionally, during live measurements, values are displayed simultaneously on both the handle and the gauge computer. By simply pressing either of the two measurement switches, data is automatically saved within the gauge computer for statistical analysis. 【Features】 ■ Smooth synchronization with the gauge computer ■ Measurements can be taken with the gauge alone without connecting to the gauge computer ■ Reliable measurements even in harsh field environments ■ Contains a long-lasting, fast-charging Li-Ion battery ■ Can be comfortably used at any time with the induction charging stand *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

Design that meets needs and reasonable prices! It has excellent features.

"Duo" is a high-quality 4.3-inch electronic display unit that allows for simple applications to be performed intuitively and quickly. It is suitable for simple manual applications when only minor measurements are needed on-site. Additionally, collected data can be transferred via a USB port or an optional field bus port, and it can also be stored in the built-in flash memory. 【Features】 ■ Extremely compact and powerful, like a smartphone ■ Equipped with 2 sensor input channels, allowing simultaneous display of two measurement values ■ The system is easy to configure and provides clear visualization of measurement status ■ Suitable for situations requiring minor measurements on-site ■ Designed to meet needs at a reasonable price *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other production management systems

It will contribute to cost reduction, allowing resources to be allocated to more important issues!

This document provides information about the "Artis Smart Monitoring Solution" in the context of machines, work, and FACTORY 4.0. It introduces an overview and features of the "Artis Smart Monitoring Solution," the product matrix of "GENIOR MODULAR," and tool/process monitoring. Additionally, it includes information on "machine condition monitoring" and the software "C-THRU4.0," so please feel free to read through it. [Contents (partial)] ■ Artis Smart Monitoring Solution ■ Simple integration of GENIOR MODULAR ■ GENIOR MODULAR product matrix ■ GENIOR MODULAR tool/process monitoring ■ GENIOR MODULAR base module *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

Achieved significant miniaturization while maintaining top-class repeatability and measurement performance. Can be installed in limited spaces such as mold processing machines and precision machining equipment.

The "VTS SF-45 Compact" is a non-contact imaging camera tool setter for CNC machines that adapts to limited space within the machine. It has achieved significant miniaturization while maintaining previous measurement performance. An air shutter covers and protects the optical lens, designed with harsh machine environments in mind. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments

Expanding the measurement area while maintaining top-class repeatability and measurement performance. Ideal for measuring grinding tools and special-shaped tools, as well as wear management.

The "VTS WF (Wide Field)" is a non-contact imaging camera tool setter optimized for measuring special tools that are crucial for ultra-high precision machining on CNC machines. It is specifically designed for applications in high-precision turning centers and lathes. Depending on the frame range size, it can measure tools with a diameter of up to 2.9 mm for double-sided and up to 80 mm for single-sided. An air shutter covers and protects the optical lens, designed with consideration for harsh machine environments. The camera tool setter can also be used to measure complex-shaped tools and grinding tools, such as grinding wheels, which are difficult to measure with other tool setters. It enables the measurement and management of tools that require high quality and machining precision, which have previously been challenging to automate (unmanned), contributing to increased production efficiency and reduced labor. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measurement, recording and measuring instruments

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

To streamline the quality control of shafts and fastening components, and to eliminate setup time. A free online seminar on non-contact measurement will be held.

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

Easily manage the surface temperature of molds! Contributes to the stabilization of die-cast product quality (compatible with mega/giga casting) [*Demo available].

"TTV (Total Thermal Vision)" is an infrared vision system designed to monitor the surface temperature of molds during the die-casting process. The thermographic camera built into the machine applies infrared visual technology to monitor the thermal map of the mold surface in real-time. It visualizes the processing steps and contributes to the optimization of release spray and lubrication processes during die-casting production. Additionally, the system consists of a controller unit and a thermographic camera unit, both designed to operate in particularly harsh foundry environments. 【Features】 ■ Stabilization of quality ■ Reduction of process costs (decrease in the number of waste shots) ■ Extension of mold lifespan ■ Optimization of cycle time ■ Improvement of system efficiency (OEE enhancement) ■ Analysis of process variables and errors ■ Reduction of unexpected process stoppages *Demonstrations are available. Please feel free to inquire. For detailed specifications, please download the PDF and take a look.

• Thermography
• Other measurement, recording and measuring instruments

We provide a comprehensive solution specialized in functional testing and EoL (End of Line) testing for various types of electric motors.

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors
• Other Auto Parts
• Testing Equipment and Devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube