*★*―――Notice of Winter Holiday Closure [2024]―――*★*

Certified steel fixtures with glass inserts. Turning invisible doors into visible ones! The combination with heat-resistant glass allows for visibility inside, making it effective for rescue and evacuation activities during a fire!

TanaFire F is a specific fire protection equipment created by combining heat-resistant crystallized glass (Firelight). 【Features】 ○ It is transparent, making it effective for rescue and evacuation activities during a fire. ○ The heat-resistant crystallized glass "Firelight" has a thermal expansion coefficient close to zero and is a material that is strong against thermal shock, as it does not break even when heated to 800°C and then doused with cold water. ○ Various shapes of steel doors/windows and stainless steel doors/windows have obtained individual certification. * While it is strong against heat, its impact strength is equivalent to that of standard float glass. ● For other functions and details, please download the catalog. ◇ TanaFire F "Ready-Made TanaFire" Sales Start ◇ We have started selling ready-made TanaFire. We will deliver TanaFire with free shipping in as little as 3 days (depending on the region). ■ Specifications Dimensions: W900×H2100 Frame Shape: Frame / Slit Coating: Rust-proof coating (finishing separately) Hardware: Lever handle, DC, lock (3 keys), with door stop * Some hardware and the installation of the door itself will be charged separately. * For details, please refer to the sales website and catalog below.

• Glass

In as little as three days to the necessary site. We have started ready-made sales of glass-included specific fire prevention equipment "TanaFire."

:*・゜☆。.:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。 Fastest delivery in 3 days! (Depending on the delivery area) New release of ready-made Tanafire! .:*・゜☆。.:*・゜.:*・゜☆:*・゜☆。.:*・゜☆。:*・゜☆。 In the unlikely event that on-site, "There’s a change in the section, and we need to switch to a glass-enclosed specific fire protection equipment!" "I want to brighten the space with glass instead of a regular flush door...?" "We received a notice from the fire department!!" Even if such incidents (or rather, events) occur, don’t worry! We will handle that glass-enclosed specific fire protection equipment! We have started selling the glass-enclosed specific fire protection equipment certified by the Minister of Land, Infrastructure, Transport and Tourism, "Tanafire," through our online shop, mainly for contractors who can perform painting and installation work in-house! The size and specifications are fixed, but the frame, door, and hardware come as a complete set. The glass in the door is already installed, so it can be mounted immediately upon arrival. The painting, including rust prevention, is also completed, allowing for matching with the finishing paint on-site! Shipping is free except for some regions and remote islands. We will deliver the three packages of frame, door, and hardware to sites struggling with delivery times. For more details, please check our website or catalog!

• Glass

Tanaka Sash Industry Co., Ltd. has continuously created safe and comfortable living environments in buildings and residences with steel building products.

Since our founding in 1920, we have continued to create safe and comfortable living spaces in buildings and homes through the manufacturing of steel fixtures. We respond wholeheartedly to the evolving and sophisticated needs of our customers with advanced technical skills and cutting-edge research and development capabilities. We uphold our belief in quality-first manufacturing and continue to challenge ourselves towards new creations for the future. We always return to our founding principles and strive to build a company that is trusted. We maintain a strict quality-first philosophy while also considering the environment and pollution. We have introduced production lines with state-of-the-art equipment, always aiming for quality. We value advanced technology and development capabilities and approach our work with a spirit of challenge. *For more details, please refer to the PDF document or feel free to contact us.*

• Other environmental equipment

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.