EcoPro 2024

It is a non-fluorinated oil-resistant paper that does not use organic fluorine compounds (PFAS).

Thanks to the coating technology of the Prince Group, oil resistance has been achieved with paper materials. It is a "non-fluorinated oil-resistant paper" that does not use organic fluorine compounds (PFAS), which raise concerns about their impact on the environment and health.

• Paper and pulp

We will introduce paper materials with barrier properties suitable for your application.

The SILBIO series is a new paper packaging material that serves as an alternative to plastic film. Since it uses more than 51% paper material, it is eligible for the paper mark. - SILBIO BARRIER A barrier coating layer has been applied to the paper. - SILBIO ALBA Aluminum vapor deposition has been applied to the paper, achieving high barrier properties and opacity. - SILBIO CLEAR In addition to barrier properties, it features visibility of the contents. - SILBIO EZ SEAL It is specialized for easy heat sealing functionality. *Please note that it does not have barrier properties.

• Paper and pulp products

This is an OPP film blended with fine powder of scallop shells. The film surface becomes alkaline, preventing the growth of bacteria.

"Calfresh" is a polypropylene (OPP) film that incorporates fine powder from scallop shells. The film surface becomes alkaline, inactivating bacteria and preventing their proliferation. "Calfresh" contributes to the SDGs through waste reduction. - Utilization of scallop shells that are treated as waste - Reduction of food loss through bacterial inactivation For more details, please download the catalog or feel free to contact us.

• plastic
• Packaging Bags

Environmentally friendly tack paper made with recyclable adhesive along with used paper.

- Paper tags, which were previously considered taboo in paper recycling, can now be collected and used together with regular waste paper (they can be disintegrated). - A water-dispersible adhesive is used. It loses its adhesive properties in water and disperses evenly, making paper recycling possible.

• Office supplies and stationery

Proposal for reducing plastic! This is a label tack made from biodegradable biomass plastic. We offer both white and transparent types.

This is an environmentally friendly label tack from Oji Tack made from materials that are easy to decompose naturally (such as biodegradable materials). Biomass raw materials were used to reduce carbon dioxide emissions during incineration. Original decomposition tests are currently being conducted (in seawater and soil). <Features> ◆ The surface material uses biomass plastic that is easy to decompose naturally. ◆ A special adhesive that does not easily inhibit the decomposition of the surface material is used. ◆ Printing suitability equivalent to PET labels and OPP labels. ◆ Superior water resistance compared to conventional paper tacks. ◆ Registered as a Plastic Smart product by the Ministry of the Environment. *For more details, please download the PDF or contact us.

• Sealing machine
• Paper and pulp products
• Adhesive tape

No more plastic needed! Perfect for online shopping! A "paper cushioning envelope" that spreads out like a net and gently wraps and protects products like a hammock.

This is an ALL-paper "Paper Net Envelope" that responds to the global trend of reducing plastic. The cardboard boxes used for online shopping are bulky and do not fit in mailboxes, which is a problem. Thick paper envelopes made of coated board can fit in mailboxes, but thicker ones are difficult to insert and lack cushioning, limiting their use mainly to documents. On the other hand, envelopes lined with bubble cushioning material that has an air layer with bumps provide good cushioning, but the issue is the effort required for sorting during disposal. Therefore, by expanding a mesh-like paper sheet inside the envelope, we discovered that it is possible to achieve both cushioning and strength with an ALL-paper product, thanks to the softness of the paper and the strength of its structure. 【Features】 - No need for sorting during disposal - Easy disposal and recyclability - Achieves both cushioning and strength even with ALL-paper materials For more details, please download the PDF or contact us.

• Other packaging materials
• Packaging materials
• Food boxes, packaging materials, and cushioning materials

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.