Notice of Participation in the 2025 Mobak Show (29th International Bakery and Confectionery Industry Exhibition) from February 18 (Tuesday) to February 21 (Friday), 2025.

Improvement of non-stick properties of stainless steel allows for reduced cleaning time. Complies with PFAS regulations! *Case study collection available!

The "PEEK Coating" is a product that enables coating by powdering PEEK (Polyether Ether Ketone) resin and subsequently dissolving it in water. After application, it can be hardened through firing, allowing the performance of PEEK resin to be enhanced. It excels in wear resistance, chemical resistance, heat resistance, and non-stick properties. By applying and firing it onto molds, it can significantly improve mold lifespan and eliminate the hassle of re-coating, among various other expected benefits. 【Features】 ■ High heat resistance (continuous use temperature of 260°C) ■ Chemical stability against acids, alkalis, and organic solvents as a form of chemical resistance ■ Reduces friction and wear, achieving longer lifespan *For more details, please download the PDF or feel free to contact us.

• Coating Agent

The base material is stainless steel and aluminum! Obtained (U.S.) FDA and (Japan) Food Sanitation Act certifications.

We would like to introduce a case where our 'PEEK coating' has been adopted in cooking appliances. There were issues with the peeling of the fluorine coating in the inner pots of rice cookers and the challenges of fluorine alternatives due to PFAS regulations. With this adoption, we were able to obtain FDA approval in the U.S. and compliance with the Food Sanitation Act in Japan, leading to a long-standing track record for the inner pots of rice cookers. 【Case Overview】 ■Challenges - Peeling of the fluorine coating in rice cooker inner pots - Fluorine alternatives due to PFAS regulations ■Results - Long-standing track record for rice cooker inner pots *For more details, please download the PDF or feel free to contact us.

• Coating Agent

Expectations for a decrease in water stains! A case where coloring on stainless steel has become possible.

We would like to introduce a case where our 'PEEK coating' was adopted for kitchen sink units. There were no paints available that allowed for painting on stainless steel for sink bowls and range hoods. With its adoption, the paintability on stainless steel has improved. 【Case Overview】 ■Challenges - Diversification of color design - No paint available that allows for painting on stainless steel ■Results - Coloring on stainless steel has become possible - Paintability on stainless steel has improved *For more details, please download the PDF or feel free to contact us.

• Coating Agent

20 years of experience in domestic rice cooker manufacturers with high durability PEEK coating in the inner pot.

A complaint about the fluorine coating peeling off occurred in the inner pot of a domestic rice cooker manufacturer. Since switching to PEEK coating about 20 years ago, there have been no complaints regarding peeling paint or similar issues; it is a coating that has excellent adhesion to metals.

• Coating Agent

Introducing a case that has received the evaluation of "Innovation is happening in the baking industry!"

We would like to introduce a case where our 'PEEK coating' was adopted for bread loaf molds. In bread loaf molds, the durability of the mold coating (silicone, fluorine) was short, requiring frequent recoating, and there were also issues with the release properties from the bread. With the adoption of the coating, there was no peeling, and both the release properties and coating durability improved, leading to an increase in bread yield. [Case Overview] ■Challenges - The durability of the mold coating was short, requiring frequent recoating. ■Results - No coating peeling, and the coating durability improved (release properties were also not an issue). - Increased bread yield. *For more details, please download the PDF or feel free to contact us.

• Coating Agent

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 31st Measurement and Measurement Exhibition INTERMEASURE 2024 Official Website: https://intermeasure.org/itms2024/ 【 Dates 】 From __ (Wednesday) to __ (Friday), 202_ 【 Venue 】 Tokyo Big Sight (Tokyo International Conference Center) East Hall (Booth Number: ___) 【 Exhibited Products 】 - Air Leak Tester - Hydrogen Leak Detector - Pin Hole (Reference Test Piece) and more. For more details, please refer to the "Related Materials" (PDF file) below.

[Instructor] Paulstar Communications Inc. Representative Director Koji Kita [Key Lecture Content] Have you ever felt that, despite entrusting work to Generation Z and young employees, they "don't seem to get started," "don't lead to the expected results," or "it's ultimately faster to do it myself"? Behind these situations are various factors, including the recognition gap between supervisors and young employees regarding "entrusting and being entrusted," how to communicate the purpose of the work, the approach, and the scope of discretion, as well as how to follow up after delegating tasks. In this seminar, we will practically explain "how to delegate work" to elicit proactive behavior, taking into account the perspectives and behavioral characteristics of Generation Z and young employees. We will share specific management techniques to help supervisors break free from the burden of work, encourage the autonomy and growth of young employees, and steadily lead to results.

[Speaker] Yoichiro Okuyama, Senior Researcher, Research Department, Hamagin Research Institute, Inc. [Key Lecture Content] In China, the operation of autonomous taxis began in 2021, and now fully unmanned robo-taxis are running in cities like Beijing and Shenzhen. Experiencing a ride reveals the evolution of technology through natural acceleration, smooth steering, and seamless deceleration. Currently, there are several thousand vehicles in operation, but projections suggest that by 2030, this number could exceed one million, accounting for 70% of the global total. What are the underlying factors driving the social implementation of robo-taxis in China? By incorporating local test ride experiences, we will analyze the revenue situation of robo-taxi operating companies and the outlook for market expansion based on data, exploring their future potential. [Lecture Items] 1. Personal experiences of test riding robo-taxis in China 2. Trends in the market size of robo-taxis in China and globally 3. Background of the advancing social implementation of robo-taxis in China 4. Public acceptance and actual usage 5. Performance and challenges of major robo-taxi companies 6. Will robo-taxis become widespread in Japan as well? 7. Q&A / Business card exchange

Daitō Shikō Co., Ltd. will exhibit at the "102nd Tokyo International Gift Show Autumn 2026," which will be held at Tokyo Big Sight from September 2 (Wednesday). At the exhibition venue, we plan to showcase new products including the A7 binder, popular foil-stamped goods, stationery, clear files, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

Our company will participate in the 1st High-Performance Materials Exhibition (within High-Performance Materials Week) as a member of the MGC Group. We will be showcasing various functional polycarbonate resins that can serve as alternatives to metals and ceramics, so please be sure to visit our booth.