Prince Kinokuro will exhibit at "POWTEX 2024 (25th International Powder Technology Exhibition Tokyo)."

A new type of antibacterial sheet that is used wet! The antibacterial component is derived from scallop shells, making it safe for contact with food and dishes.

This sheet is made from 100% natural material derived from scallop shells and exhibits excellent antibacterial and disinfecting effects when in contact with moisture. Its effectiveness is demonstrated even when wet with water or food moisture. The antibacterial component is the same as that used in food additives made from calcined shells. ◆ Diverse antibacterial effects! When in contact with moisture, it becomes alkaline and exerts effects against microorganisms. A wide range of antibacterial effects has been confirmed, from everyday bacteria to mold and viruses! It is effective even with food moisture (can be used directly without wetting). *It does not cover all viruses and bacteria. *Effectiveness may vary depending on the type and condition of the food. ◆ Excellent storage properties! This lightweight sheet is suitable for long-term storage! ◆ Odorless and non-chlorine! Being derived from natural sources and containing non-chlorine components, it requires no wiping and has no odor! ◆ Deodorizing effect as well! Deodorizing effects have also been confirmed.

• Paper and pulp
• Other packaging materials
• others

Recommended for producers selling cherry tomatoes on e-commerce sites! This sheet absorbs juice and exhibits anti-fungal effects, with a texture like silk.

The freshness-preserving sheet for mini tomatoes, "Nure Senka," is a food-contactable product that combines natural pulp with 100% powdered baked scallop shells. It suppresses the major threats to mini tomatoes, such as cracking and mold. 【Effects of the Sheet】 - Moisture absorption effect suppresses high humidity environments (condensation) → leads to reduced cracking - Antibacterial and antifungal effects suppress the spread of mold caused by fruit juice - High cushioning properties allow it to be used as a cushioning material during transport 【Optimal Conditions for Effectiveness】 - Transported by cool delivery → exposed to room temperature upon arrival, causing condensation - Sealed inside a cardboard box during the hot and humid summer months, creating a steamy environment - Condition where fruit juice is released from cracked mini tomatoes * This product does not address viruses or bacteria. For more details, please refer to the PDF document or feel free to contact us.

• Paper and pulp products

It is a non-woven fabric material that can be processed through thermoforming, sewing, and welding, primarily made from cellulose and PLA. It has a gentle texture mainly derived from pulp.

"Kinari-to" is a plant-based sheet that can be heat-formed, sewn, and welded. It is made from wood, has a natural texture and gentle feel, and can combine wood fibers with various materials. - Certified with a 95% biomass mark. 【Features】 ≪Plastic-free≫ It does not use fossil resource-derived plastics and utilizes plant-based raw materials. ≪Biodegradable≫ The cellulose and biomass plastics used as raw materials are biodegradable. They can decompose under certain conditions and return to nature. ≪Possible to blend powders, etc.≫ It can incorporate functional powders such as deodorants, as well as unused biomass like tea leaves and coffee grounds. ≪Shape flexibility≫ It can be heat-pressed into various shapes using standard molding machines for resin sheets. Additionally, it is possible to create bag-shaped items through sewing or welding. ≪Other features≫ Provides cushioning and shock absorption through the airlaid method. Excellent breathability and moisture retention. Functional properties such as deodorization and moisture absorption can also be added. For more details, please refer to the catalog or feel free to contact us.

• Paper and pulp products

Even when absorbed and swollen, it is difficult for the shape to collapse. The TDS method, which does not use water, allows SAF to be made into sheets!

This is a highly absorbent sheet with excellent water absorption performance. It has moisture absorption and desorption capabilities. Since it contains high absorbent fibers (SAF), there is no shedding of powders or similar materials. It is also possible to laminate other materials on both sides. Mixing powders or similar substances into the middle layer is also possible.

• Paper and pulp
• Paper and pulp products
• Organic Natural Materials

In the unlikely event of a hole forming, the absorbent sheet catches and absorbs the leaking water, swelling to seal the hole for peace of mind. It plays a significant role as the absorbent layer of a self-repairing waterproof sheet!

The self-repairing waterproof sheet for leak prevention can be utilized as an absorption layer of the self-repairing waterproof sheet. If there is only a waterproof layer, any damage that causes a hole can lead to leaks; however, the high water-absorbent resin (fiber) incorporated into the sheet absorbs water and swells to seal the hole, preventing leaks. It can be used in waterproof civil engineering works such as final disposal sites, agricultural reservoirs, river embankments, and retention basins. As an absorption layer of the self-repairing waterproof sheet, it is common to have a bentonite layer sandwiched between the non-woven fabric of the surface material and the backing material. The disadvantage is that the sheet is very heavy, requiring large machinery for installation. Comparison with bentonite-based sheets: ◆ Work is made easier! A significant weight reduction of 25% improves workability! Large machinery is unnecessary, and the lightweight nature makes handling easy. ◆ Work efficiency is improved! The roll length is up to about five times longer, enhancing workability! The sheet is highly flexible and easy to handle, and the significantly increased roll length improves work efficiency. Features of the self-repairing waterproof sheet for leak prevention: - It has excellent waterproofing properties. - Even if sharp objects penetrate the sheet, it self-repairs and is less likely to leak. - It is lightweight and has excellent workability.

• Paper and pulp products
• Other consumables
• others

Utilizing the unique roughness of thick fibers for dirt removal, it scrapes off stubbornly adhered dirt!

This is a cleaning sheet that can be used in various places such as the kitchen and bathroom. The thick fibers effectively scrape off stubborn dirt and water stains. It features a two-layer structure: a scraping layer that removes dirt and an absorbent layer that securely holds liquid when using detergent. Additionally, it is possible to incorporate powdered cleaning agents into the sheet. The scraping layer contains fibers that are several times thicker than our standard fibers. In addition to the hardness of the thick fibers, the air-laid manufacturing method creates a raised texture on the surface of the sheet, which helps to scrape off dirt. Furthermore, our production method allows for the incorporation of powders into the sheet, enabling the blending of various functional powders. For example, it is possible to incorporate powdered cleaning agents such as citric acid, baking soda, and sodium sesquicarbonate. Please feel free to contact us.

• plastic
• Composite Materials
• Paper and pulp

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

[Lecture Topics] 1. Trends and Business Opportunities in Japan's Expanding Energy Storage Industry Koichiro Danno, Principal and Head of Social and Policy Design Unit, Research and Consulting Division, Japan Research Institute, Inc. 1. Background Necessitating Energy Storage Business 2. Behind the Meter (BTM) Business and In Front of the Meter (IFM) Business 3. Trends in Japan's Energy Policy Related to Energy Storage 4. Current Revenue Models in Japan 5. Verification of Profitability in Energy Storage Business 6. Summary 7. Q&A 2. Expansion of Grid-Scale Energy Storage Business in Europe and Japan and Future Prospects Takayuki Ogawa, Executive Officer, Deputy Head of Business Strategy Division, Japan Kogyo Energy Solutions, Inc. and Executive Director, Nippon Koei Energy Europe B.V. 1. Overview of the Company and Introduction to Energy Business 2. Efforts in Energy Storage Business in Europe 3. Efforts in Energy Storage Business in Japan 4. Role and Importance of Aggregators 5. Challenges and Future Prospects of Grid-Scale Energy Storage Business 6. Summary 7. Q&A