Changed the outer frame fixing screws of the opening door series.

Utility aluminum doors that meet a wide range of needs.

This is a flush door that meets a wide range of needs, from large doors for the entry and exit of machinery from inspection openings to air-tight doors for super clean rooms that require strict airtight performance for the entry and exit of people and goods. The DR30 is a thin and lightweight aluminum flush door suitable for inspection openings and doors for people, commonly referred to as "man doors," using latch-type locks. The DR34 is a thin and lightweight aluminum flush door that can incorporate electric locks using a dedicated outer frame and is compatible with interlock and access control systems. It has a clean appearance due to its small frame dimensions. There are the "DR30," which uses latch-type locks, and the "DR34," which allows for the incorporation of electric locks using a dedicated outer frame. The DR40 is a versatile aluminum flush door that accommodates a wide range of needs, from various sizes for large doors for the entry and exit of machinery to super clean rooms that require high airtightness for the entry and exit of people. It meets airtight performance grade A-4 even with three-sided frames, as well as four-sided frames.

• others

It is a standard machine hatch.

A detachable machine hatch that allows for an opening size that is difficult to achieve with a door. Since some work is required for detachment, it is a condition that the frequency of opening and closing is low. Additionally, the internal aluminum frame of the TH40 is sturdier and can accommodate larger sizes compared to the TH30. When the height dimension increases, it is recommended to use a plus bar to increase the engagement with the outer frame. ◇TH40◇ The TH40 can accommodate a large size with an effective height dimension of 4500mm. Multiple machine hatches can be removed one by one and then put back in place. The three-sided frame specification is affected by floor irregularities, so it is necessary to ensure a level floor. The four-sided frame specification, which emphasizes airtightness, often has the lower frame getting in the way, so it is common to make the lower frame detachable. Additionally, when the height dimension increases, it is recommended to use a plus bar to increase the engagement with the outer frame. ◇TH30◇ The TH30 accommodates an effective height dimension of up to 3000mm. Its basic functions are the same as those of the TH40. Since some work is required for detachment, it is a condition that the frequency of opening and closing is low.

• aluminum
• Other clean room equipment and facilities
• others

No unevenness, easy to manage hygiene! Full flat machine hatch.

Flat design machine hatch with minimized protrusions ◇THF40◇ Windows and doors installed on the walls of clean rooms need to eliminate protrusions that could obstruct airflow as much as possible. This is a flat design removable machine hatch that reduces the number of tightening handles and grips for each panel. Additionally, even for tall machine hatches, no ladder or similar equipment is required for installation and removal. ◇THF50◇ Typical removable machine hatches have exposed tightening handles and grips to secure the removable panels. In clean rooms, dust can accumulate on these hardware protrusions, and the protrusions can disrupt airflow within the clean room, potentially affecting product quality. The full flat type removable machine hatch "THF50" features a design that minimizes surface protrusions to the utmost, clearing the highest grade of airtight performance according to JIS, which is grade A-4. It is the ultimate removable machine hatch for clean rooms, ideal for industrial clean rooms (ICR) in semiconductor and precision manufacturing, as well as for bio clean rooms (BCR) that consider GMP and HACCP standards.

• aluminum
• Other clean room equipment and facilities
• others

Outstanding visibility and stylish! A machine hatch with excellent display effects.

It is ideal when expecting display effects with a detachable machine hatch. Even for the installation of large windows, which can often look awkward with panel types, TK offers a smart see-through type. By assembling transparent resin panels within the frame, a smart see-through type machine hatch is achieved.

• aluminum
• Other clean room equipment and facilities
• others

Flexible sizes and specifications! A smart-looking framed door.

This is a lightweight frame door that can accommodate from the inspection opening to the large door for the entry and exit of machinery. There are options that can use the Gremon mechanism and electric locks. You can choose between two types: one with a middle rail that separates the upper and lower panels, and one without a middle rail. This lightweight frame door is suitable for inspection openings and doors for human entry and exit, commonly referred to as "man doors." There are two models available: "DK30," which uses a latch-type lock, and "DK34," which allows for the integration of an electric lock using a dedicated resin cassette and a dedicated outer frame. You can choose between the type with a middle rail that separates the upper and lower panels and the type without a middle rail. The DK40 is an aluminum frame door specifically designed for large doors for the entry and exit of machinery. By increasing the vertical frame size, it enables the installation of the Gremon mechanism and electric locks, achieving a larger frame door. It can also be used when you want to secure a large window in a large door.

• aluminum
• Other clean room equipment and facilities
• others

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.