Just by looking at this, you'll understand everything! We created a PR flyer (dust removal version).

No need for water washing! Air blow cleaning removes stubborn dirt and attached dust with just air.

No more water washing is needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blowing, stubborn dirt that has adhered and dust that has settled, as well as dirt that has penetrated scratches, can be removed 'without water.' Additionally, it stands out from other nozzles in its ability to remove not only dirt but also dust and metal shavings (compatible with clean rooms). *In some cases, degreasing or chemical cleaning may be necessary. ■ Advantage 1: Improved productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■ Advantage 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks become unnecessary. The freed-up resources can be redirected to departments or tasks within the company that are lacking personnel, thereby optimizing personnel allocation and improving operational efficiency.

• Other cleaning machines

Complete removal of garbage, dust, and debris with air blow!

Are you facing any of these issues with "air blow dust removal"? ✓ Small dust remains on the workpiece ✓ Unable to remove dust from grooves and recesses ✓ High defect rate and low productivity ✓ Want to avoid quality degradation and loss of customer trust due to product defects <The "Air Screw Nozzle" solves these problems> The Air Screw Nozzle sprays rotational waves by rotating the nozzle body. Additionally, with its unique technology, it cuts air within the nozzle. This "cut air from rotational waves" thoroughly removes dust, dirt, and even fine particles. 【Five Benefits】 1. Streamlined processes With overwhelming air blow power, dust does not remain on the workpiece. 2. Washable without water It is possible to clean without using water, as it blows away dirt and dust with air. 3. Reduced defect rate Thorough dust removal contributes to a decrease in defect rates and an improvement in yield rates, enhancing product quality. 4. Increased productivity Since workpieces can be continuously fed in, efficient dust removal leads to increased line productivity. 5. Cost reduction Improvements in productivity and reductions in defect rates can help cut various associated costs.

• Drying Equipment

Complete removal of garbage, dust, and dirt with air blow!

Are you facing these issues with "air blow dust removal"? ✓ Small dust remains on the workpiece ✓ Unable to remove dust from grooves and recesses ✓ High defect rate and low productivity ✓ Want to avoid quality degradation due to product defects and loss of customer trust <This problem can be solved by the "Air Blow Dust Removal Device"> 【Five Benefits】 1. Streamlining the process With overwhelming air blow power, dust can be removed, leaving no residue on the workpiece. 2. Cleaning without water Dust and debris can be blown away using air, allowing for cleaning without the use of water. 3. Reduction in defect rate Thorough dust removal contributes to a decrease in defect rates and an increase in yield, thereby improving product quality. 4. Increased productivity Workpieces can be continuously fed in for efficient dust removal, leading to improved line productivity. 5. Cost reduction By increasing productivity and reducing defect rates, various associated costs can be minimized.

• nozzle

No more revolution! No need for washing; particles are removed with just air blowing.

<Compatible with Class 100! Can be used for cleaning semiconductors> This air nozzle, utilizing a patented unique technology, has an air ejection power that is on a completely different level compared to conventional air nozzles. It removes particles adhered to semiconductors through powerful air blowing. (Compatible with Class 100) In other words, the cleaning process that used to involve three steps: "1. Water washing ⇒ 2. Water draining ⇒ 3. Drying" has been completely transformed. It can now be completed in one step using only "air blowing" without any water. This significantly shortens the process. ■ Benefit 1: Increased productivity and production volume The entire sequence of water washing, water draining, and drying is replaced by cleaning with only air blowing. This means that water washing, water draining, and drying are no longer necessary, leading to a remarkable improvement in productivity and production volume. ■ Benefit 2: Improved operational efficiency and cost reduction As mentioned above, the elimination of the entire sequence allows for significant cost cuts on personnel, various equipment, and the running costs and electricity expenses associated with those equipment. ■ Benefit 3: Improved yield With cleaning power that cannot be compared to other air nozzles, it contributes to improved yield. This helps enhance production efficiency.

• Other semiconductor manufacturing equipment

No need for water washing!! Air blow cleaning removes stubborn dirt and attached dust with just air.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unparalleled air blast power. With powerful air blowing, stubborn dirt that has adhered or dust that has settled, even dirt that has penetrated scratches, can be removed 'without water.' Additionally, it stands out from other nozzles in its ability to remove not just dirt, but also dust and chips. (Compatible with clean rooms) *In some cases, degreasing or chemical cleaning may be necessary. ■ Benefit 1: Increased productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction of the time previously required, significantly improving productivity and production volume. ■ Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of washing and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks are no longer needed. The freed-up resources can be redirected to departments or tasks within the company that are lacking in human resources, allowing for optimization of personnel allocation and improved operational efficiency.

• Other physicochemical equipment

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing is needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blowing, stubborn dirt that has adhered and dust that has settled, even dirt that has penetrated scratches can be removed 'without water.' Moreover, it stands out from other nozzles in its ability to remove not only dirt but also dust and chips. (Compatible with clean rooms) *For some items, degreasing or chemical cleaning may be necessary. ■ Advantage 1: Improved productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■ Advantage 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning and drying processes are no longer necessary, the personnel and human resources previously allocated to those tasks become unnecessary. The freed-up resources can be redirected to departments or tasks within the company that are lacking in personnel, allowing for optimization of personnel allocation and improved operational efficiency.

• Dust collector

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blowing, stubborn dirt that has adhered or dust that has settled, even dirt that has penetrated scratches, can be removed without water. Additionally, it stands out from other nozzles in its ability to remove not only dirt but also dust and chips (compatible with clean rooms). *In some cases, degreasing or chemical cleaning may be necessary. ■ Benefit 1: Improvement in productivity and production volume The entire process of water washing, draining, and drying can be replaced with air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■ Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of washing and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks become unnecessary. The freed-up resources can be redirected to departments or tasks within the company that are lacking in human resources, allowing for optimization of personnel allocation and improved operational efficiency.

• Ultrasonic Cleaner

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air blast power. With powerful air blowing, stubborn dirt that has adhered and dust that has settled, even dirt that has penetrated scratches can be removed 'without water.' Additionally, it stands out from other nozzles in its ability to remove not only dirt but also dust and metal shavings. (Compatible with clean rooms) *In some cases, degreasing or chemical cleaning may be necessary. ■Benefit 1: Improved productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning and drying processes are no longer necessary, the personnel and human resources previously allocated to those tasks are no longer needed. This allows for the reallocation of resources to departments or tasks within the company that are lacking personnel, optimizing personnel allocation and improving operational efficiency.

• Ionizers and static eliminators

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blowing, stubborn dirt that has adhered or dust that has settled, even dirt that has penetrated scratches, can be removed 'without water.' Additionally, it stands out from other nozzles in its ability to remove not just dirt, but also dust and chips (compatible with clean rooms). *In some cases, degreasing or chemical cleaning may be necessary. ■ Benefit 1: Improved productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly enhancing productivity and production volume. ■ Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of washing and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks become unnecessary. This allows for the reallocation of those resources to departments or tasks within the company that are lacking personnel, optimizing personnel allocation and improving operational efficiency.

• Static electricity eliminator

No need for water washing!! Air blow cleaning removes stubborn dirt and attached dust with just air.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unmatched air ejection power. With powerful air blow, stubborn dirt that has adhered and dust that has settled, even dirt that has penetrated scratches can be removed 'without water'. Moreover, it stands out from other nozzles in its ability to remove not only dirt but also dust and chips. (Compatible with clean rooms) *In some cases, degreasing or chemical cleaning may be necessary. ■Benefit 1: Increased productivity and production volume The entire process of water washing, draining, and drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly improving productivity and production volume. ■Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning and drying processes are no longer necessary, the personnel and human resources previously allocated to these tasks become unnecessary. This allows for the reallocation of those resources to departments or tasks within the company that are lacking personnel, optimizing personnel allocation and improving operational efficiency.

• Other anti-static devices

No need for water washing!! Air blow cleaning with just air, from stubborn dirt to attached dust.

No more water washing needed! Air blow cleaning with just air, from stubborn dirt to attached dust. Our patented air nozzle has an unparalleled air ejection power. With powerful air blow, stubborn dirt that has adhered and dust that has settled, even dirt that has penetrated scratches can be removed 'without water.' Moreover, it stands out from other nozzles in its ability to remove not only dirt but also dust and chips. (Compatible with clean rooms) *In some cases, degreasing or chemical cleaning may be necessary. ■Benefit 1: Improved productivity and production volume The entire process from water washing to water draining to drying is replaced by air blow cleaning, eliminating the need for these steps. This allows for a complete reduction in the time previously required, significantly improving productivity and production volume. ■Benefit 2: Resolution of labor shortages and optimization of personnel allocation Since the series of cleaning to drying processes are no longer necessary, the personnel and human resources previously allocated to those tasks are no longer needed. The freed-up resources can be redirected to departments or tasks within the company that are lacking human resources, enabling optimization of personnel allocation and improvement of operational efficiency.

• Other machine elements

When measuring the flow rate of liquids or gases that are unsuitable for plastic due to high pressure or high temperature, our robust "glass tube variable area flow meter (rotameter)" allows for more accurate flow measurements. It offers a wider flow range and is suitable for various liquids and gases! 【Features】 ■ Glass tube variable area flow meter ・ Flow measurement technology with high durability, economy, and excellent operability ・ Capable of a wider flow range, suitable for various liquids and gases ■ Metal tube variable area flow meter ・ Durability and accuracy that withstands high pressure and harsh temperature environments 【Product Lineup】 ■ Glass tube variable area flow meter ・ Sho-Rate models 1350, 1355, 1358 ・ GT1600 series ■ Metal tube variable area flow meter ・ MT3750 series ・ MT3809 series ▼ For more details, visit https://www.brooksinstrument.com/ja-jp/products/variable-area-flow-meters

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.