[December 19] Basic Course on Interface Science, Third Session "Introduction to Contact Angles" [Free Admission]

Easily measure the contact angle of large substrates and actual samples on-site!

Simple, lightweight, and compact! A portable contact angle meter perfect for large substrates and actual measurements! Easy-to-use handheld type!

• Other measurement, recording and measuring instruments

Opening the world of nanotechnology! Contact angle measurement with micro droplets and multi-faceted analysis enable control of wettability in the nanoscale domain.

Patterns etched onto wafers and glass substrates are becoming finer. The automatic micro contact angle meter (MCA) is gaining attention as the next surface evaluation device in the field of micromachines/MEMS.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

A contact angle meter that contributes to solving problems related to surface and interfacial behavior between solids, liquids, and gases.

DropMaster is the definitive surface and interface analysis system that has achieved "easy to use for anyone, maintainable performance, and immediate understanding of desired information," thanks to Kyowa Interface Science products, which have been loved worldwide since its founding as a specialized manufacturer of interfacial science measuring instruments. It caters to a wide range of needs, from reasonably priced image processing systems to fully automated control systems that enable labor-saving solutions. 【Features】 ○ A "reasonable" and "multi-purpose" surface and interface analysis system ○ A comprehensive lineup ○ Consideration for the environment and recycling ○ More compact with enhanced functionality For more details, please contact us or refer to the catalog. * We also accept commissioned measurements.

• Other measurement, recording and measuring instruments

A surface tensiometer with significantly improved user interface through computer control.

The DyneMaster series is a surface tension meter that consolidates all the technology, know-how, and applications cultivated over nearly half a century by Kyowa Interface Science Co., Ltd., a specialized manufacturer. With computer control, it significantly enhances the user interface. Packed with a variety of features, it achieves high operability that does not discriminate against the user. 【Product Lineup】 ○ High-Precision Surface Tension Meter DY-700 → An fully automatic surface tension meter that pursues high precision at a practical level to solve various interfacial phenomenon problems. ○ High-Function Surface Tension Meter DY-500 → A reasonably priced fully automatic surface tension meter that also boasts a variety of extensibility beyond just surface tension measurement. ○ Automatic Surface Tension Meter DY-300 → Automatically analyzes surface tension reliably. → A basic automatic surface tension meter. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

Evaluate the surface treatment state of various powders such as fillers, pigments, and food-grade powders based on their wettability and permeability with solvents. Address the issues of powder contact angle measurement and "filling methods."

Powder is a collection of finely crushed solids and possesses unique properties that differ from the three states of matter: solid, liquid, and gas. This leads to various challenges in research and development as well as in production environments. Today, powders have become essential in a wide range of fields, from pharmaceuticals, food, and cosmetics to advanced industries such as paints, batteries, and nanotechnology. While the use of powders and processed products is generally in the form of tablets or dispersions, in order for them to fulfill their roles as products, the penetration of liquids and wettability are important factors in almost all cases, regardless of the form. The measurement of liquid penetration speed and contact angles in powders is an old yet new technology, and by utilizing the latest know-how, it is possible to obtain reproducible data.

• Other powder equipment

An automatic dynamic surface tension meter equipped with a built-in thermostat and thermometer, designed for ease of use.

The automatic dynamic tensiometer BP-D5 is a system that continuously measures dynamic surface tension from the moment the interface is formed by adopting the maximum bubble pressure method. Various controls and measurements are performed using the FAMAS software, which is also well-regarded for contact angle measurements in cooperative interfacial science. 【Features】 ○ Continuous measurement while varying the lifetime (20 to 5,000 ms) → Measurement up to 15,000 ms is possible as an option ○ Dynamic surface tension measurement at a constant lifetime is possible ○ Real-time display function of bubble pressure waveforms and LED strobe lighting function allow for monitoring the state of the bubbles ○ A series of operations from adjusting the probe depth to starting the measurement can be performed with the push of a button ○ During surface tension measurement, the temperature (°C) of the liquid sample can be recorded, allowing for temperature correction of surface tension for liquid samples with known temperature coefficients For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

Announcement of participation in the "12th Robot and Aerospace Festival Fukushima 2026 / 5th Drone Summit." 【Date and Time】 　November 27, 2026 (Wednesday) 10:00 AM - 5:00 PM Business Exhibition 　November 28, 2026 (Thursday) 10:00 AM - 4:00 PM General Exhibition 【Venue】 　Big Palette Fukushima (52 Minami 2-chome, Koriyama City, Fukushima Prefecture) 【Exhibits】 　Cardboard Insulated Box 　Craft Cooler Cube