Just clamp it in the piping and tighten the screws! We have added to the lineup of the compact-sized ultrasonic flow meter "UA102 series."

Just clamp it between the pipes and tighten the screws! No pipe processing required. Compact size integrated simple installation display device ultrasonic flow meter.

The "UA102 Series" integrated ultrasonic flow meter with easy installation display is an ultrasonic flow meter that achieves low cost, compact design, and simple installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: - Installation time is approximately 1 minute! - Capable of measuring a minimum of 4mm in diameter! - Easy installation of the flow meter body without the need for modifications to existing piping - Compact design with an integrated display - Requires almost no installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid Four types are available in the lineup: 1. Integrated display type UA102 Series 2. Separate display type UA102-S Series 3. High-temperature separate display type UA102-HiT Series 4. Sanitary separate display type UA102-Sani Series Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in the passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/outputted.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

Just clamp it in the piping and tighten the screws! Sanitary/CIP high-temperature cleaning compatible easy installation ultrasonic flow meter.

The "UA102-Sani Series" ultrasonic flow meter for sanitary/CIP high-temperature cleaning is an ultrasonic flow meter that achieves low cost, compact design, and easy installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and transducer separation type The detector part is non-contact with the fluid. ■ Compatible temperature: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids. Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/output. For more details, please contact us or download the catalog.

• Flow Meter
• Other measurement, recording and measuring instruments
• Ultrasonic Flow Meter

In a civil engineering site material yard, not only is material storage conducted, but also the frequent movement of trucks and heavy machinery, unloading, and the movement of workers. On unpaved ground, mud and ruts can occur due to rain, which may reduce work efficiency. Hyper CLT mats are civil engineering CLT materials that utilize wood CLT. By laying them in material yards or storage areas, a work space that facilitates the movement of vehicles and heavy machinery can be established while protecting the ground. They can be laid only in necessary locations, and relocation or repurposing in accordance with construction progress is also possible. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery. After use, they can also be utilized as temporary roads, access routes, or heavy machinery work yards. Additionally, they offer unique benefits of wood, such as glare reduction, noise suppression, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden mats can also be used for environmental improvement in material yards and innovative public works.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.

Features: ●CPU: Intel Core Processor (Series 3) ●Onboard Memory: Onboard LPDDR5 (up to 48GB) ●Onboard Storage: Onboard UFS (up to 256GB) ●LAN: 2.5GbE ×2 (Intel Ethernet Controller I226-IT) ●USB: USB 3.2 Type-A ×2, USB 3.2 Gen 2x2 Type-C ×1 ●GPIO: 40-pin GPIO ×1 ●Video Output: HDMI 2.1 (TMDS) ×2, DP 1.4a (via USB Type-C) ●Serial Port: RS-232/422/485 (10-pin header) ×2 ●Expansion Slots: M.2 2230 E-Key ×1, M.2 2280 M-Key ×1, M.2 2242 M-Key ×1 ●Security: TPM 2.0 ●Power Input: DC 12–24V input

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 48GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (Intel Ethernet Controller I226-IT): 2 ports ● USB 3.2 Type-A: 2 ports ● USB 3.2 Gen 2x2 Type-C: 1 port ● 40-pin GPIO: 1 port ● HDMI 2.1 (TMDS): 2 ports ● DisplayPort 1.4a: via USB Type-C ×1 ● RS-232/422/485 serial ports: 2 ports ● M.2 2230 E-Key: 1 slot ● M.2 2280 M-Key: 1 slot ● M.2 2242 M-Key: 1 slot ● Equipped with TPM 2.0 (Trusted Platform Module) ● Input power: DC 12–24V * This is a model without an operating system.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.