[January 17, 2025] Basic Course on Interface Science, Fourth Session: "Introduction to Surface Free Energy Analysis" [Free Admission]

A contact angle meter that contributes to solving problems related to surface and interfacial behavior between solids, liquids, and gases.

DropMaster is the definitive surface and interface analysis system that has achieved "easy to use for anyone, maintainable performance, and immediate understanding of desired information," thanks to Kyowa Interface Science products, which have been loved worldwide since its founding as a specialized manufacturer of interfacial science measuring instruments. It caters to a wide range of needs, from reasonably priced image processing systems to fully automated control systems that enable labor-saving solutions. 【Features】 ○ A "reasonable" and "multi-purpose" surface and interface analysis system ○ A comprehensive lineup ○ Consideration for the environment and recycling ○ More compact with enhanced functionality For more details, please contact us or refer to the catalog. * We also accept commissioned measurements.

• Other measurement, recording and measuring instruments

"Dynamic Sliding Method Kit" effective for evaluating water-repellent and oil-repellent properties of fibers and glass.

The analysis of the sliding method using conventional contact angle meters incorporates the concepts of sliding velocity and sliding acceleration, allowing for a comprehensive evaluation of droplet sliding behavior on inclined surfaces. This is expected to be widely adopted in the development of materials and coatings for water-repellent applications. (Technology provided by: Kanagawa Prefectural Institute of Industrial Technology, a local independent administrative agency) *KYOWA is pleased to offer customers a new proposal for a "dynamic sliding method" that adds time parameters to the conventional sliding method system.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

Easily measure the contact angle of large substrates and actual samples on-site!

Simple, lightweight, and compact! A portable contact angle meter perfect for large substrates and actual measurements! Easy-to-use handheld type!

• Other measurement, recording and measuring instruments

Opening the world of nanotechnology! Contact angle measurement with micro droplets and multi-faceted analysis enable control of wettability in the nanoscale domain.

Patterns etched onto wafers and glass substrates are becoming finer. The automatic micro contact angle meter (MCA) is gaining attention as the next surface evaluation device in the field of micromachines/MEMS.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

A surface tensiometer with significantly improved user interface through computer control.

The DyneMaster series is a surface tension meter that consolidates all the technology, know-how, and applications cultivated over nearly half a century by Kyowa Interface Science Co., Ltd., a specialized manufacturer. With computer control, it significantly enhances the user interface. Packed with a variety of features, it achieves high operability that does not discriminate against the user. 【Product Lineup】 ○ High-Precision Surface Tension Meter DY-700 → An fully automatic surface tension meter that pursues high precision at a practical level to solve various interfacial phenomenon problems. ○ High-Function Surface Tension Meter DY-500 → A reasonably priced fully automatic surface tension meter that also boasts a variety of extensibility beyond just surface tension measurement. ○ Automatic Surface Tension Meter DY-300 → Automatically analyzes surface tension reliably. → A basic automatic surface tension meter. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

Evaluate the surface treatment state of various powders such as fillers, pigments, and food-grade powders based on their wettability and permeability with solvents. Address the issues of powder contact angle measurement and "filling methods."

Powder is a collection of finely crushed solids and possesses unique properties that differ from the three states of matter: solid, liquid, and gas. This leads to various challenges in research and development as well as in production environments. Today, powders have become essential in a wide range of fields, from pharmaceuticals, food, and cosmetics to advanced industries such as paints, batteries, and nanotechnology. While the use of powders and processed products is generally in the form of tablets or dispersions, in order for them to fulfill their roles as products, the penetration of liquids and wettability are important factors in almost all cases, regardless of the form. The measurement of liquid penetration speed and contact angles in powders is an old yet new technology, and by utilizing the latest know-how, it is possible to obtain reproducible data.

• Other powder equipment

[Speaker] Representative Director of KKR Consulting Co., Ltd. Director of Yamada Junya Tax Accountant Office, Tax Accountant Junya Yamada Tax Accountant Mika Ikeda [Lecture Items] ● Explanation of recent renewable energy installation methods, subsidy systems, and tax incentives ● Regarding subsidy systems, explanation of local government subsidies mainly in the Kanto region 【1】Latest renewable energy schemes 【2】Explanation of renewable energy-related subsidies 1. National subsidies 2. Local government subsidies mainly in the Kanto region Tokyo, Kanagawa, Chiba, Saitama, Tochigi, Ibaraki, Gunma, etc. 【3】Explanation of tax systems related to renewable energy generation equipment and storage batteries 1. Immediate depreciation under the Small and Medium-sized Enterprise Management Enhancement Tax System 2. Carbon Neutral Tax System (applicable to large enterprises) 3. Reduction system under the Advanced Equipment Introduction Plan 4. Newly established in FY2026: Productivity Improvement Equipment Investment Promotion Tax System 【4】Q&A / Business card exchange

[Lecturer] Shinsuke Tsutsui, Senior Partner, A.T. Kearney, Inc. Energy Practice [Key Lecture Content] Japan's electricity and energy market is facing significant changes, but the impact of these changes is not necessarily definitive and continues to increase future uncertainties. Against the backdrop of the recent rapid expansion of generative AI and data centers, the previously assumed scenarios for electricity demand suppression are being significantly reassessed, though opinions on this are not uniform. Additionally, on the supply side, the business environment is becoming increasingly challenging due to rising costs and increased risks associated with renewable energy, raising doubts about the assumption of continued expansion, including offshore wind power. The energy basic plan, approved by the Cabinet in February 2025, is not functioning adequately as a foundation for management and business strategies in light of this background. Furthermore, with the introduction of new markets and systems such as real-time markets, supply capacity obligations, medium- to long-term markets, and GX-ETS on the horizon, the ability to respond to regulations has become a key factor in the competitiveness of electricity and energy businesses. In this lecture, we will consider the changes in demand and supply structures, the impact of new markets/systems, and the influence of political and international situations, exploring the key points that companies should focus on in their strategic considerations post-2025 from multiple perspectives.

We are pleased to announce that our company will be exhibiting at the "35th UOS Kansai IT POWER UP Fair 2025," which will be held on Wednesday, October 29, 2025. ▼ Event Overview This exhibition will showcase the latest IT tools from the Kansai region, featuring a total of 27 solutions. We will be presenting "Smartsheet." Date: Wednesday, October 29, 2025, from 11:00 AM to 5:30 PM (Registration starts at 10:45 AM) Location: Osaka Industry Creation Center, 3rd and 4th Floors, 1-4-5 Honmachi, Chuo Ward, Osaka City, Osaka Prefecture Organizer: UOS Group Kansai Branch Participation Method: Pre-registration (free) To register, click here Official website: https://fair.uos.gr.jp/form/kansai2025/ ✔ Those interested in IT ✔ Those facing challenges in project management ✔ Those interested in Professor Fujii's lecture, etc. If you have any interest at all, we would be delighted to see you there! We look forward to welcoming you!

The popular training conducted by ISO certification bodies, which has been held 500 times nationwide over approximately 20 years, has now become an online seminar. This online training can be taken safely from your workplace or home. With no burden of traveling to a venue, the efficient online seminar is now the preferred choice! While many training courses typically last two days, this course has carefully selected key points and is designed to be mastered efficiently in one day. We have received numerous positive comments about having a fulfilling day. Unlike many training sessions that consist of just listening to lectures, our program incorporates engaging elements such as practical group exercises and targeted training, along with explanations based on abundant audit examples and easy-to-understand texts that are also helpful for review. This has led to its adoption in regular training sessions by major manufacturers and global companies. [Feedback from participants] - The specific examples explained were easy to understand. - The text clearly summarized the important points of the standards. - The lecture content was not too formal, which was nice. - The explanations were thorough, allowing us to learn the key points even in a short time. - I enjoyed the group workshops even in the online seminar.

The popular training conducted by ISO certification bodies, which has been held 500 times nationwide over the past 20 years, has now become an online seminar. This online training can be taken safely from your workplace or home. With no burden of traveling to a venue, the efficient online seminar is now the preferred choice! While many training courses typically last two days, this course has carefully selected key points to be efficiently mastered in one day. We have received numerous positive comments about having a fulfilling day. Unlike many training sessions that involve just listening to lectures, our program incorporates engaging elements such as pointed training and practical group exercises, along with clear explanations based on abundant case studies, and easy-to-understand texts that are helpful for review. This has led to its adoption in regular training sessions by major manufacturers and global companies. [Feedback from participants] - The explanation of specific examples was easy to understand. - The text summarized the important points of the standards clearly. - The lecture content was not too formal, which was good. - The explanations were thorough, allowing us to learn the key points even in a short time. - I enjoyed the group workshops even in the online seminar.