Launch of spacer set for attaching Raspberry Pi HAT-sized boards of the CPI series to Raspberry Pi 5.

Spacer set for attaching Raspberry Pi HAT size boards of the CPI series to Raspberry Pi 5.

This product is a spacer set (for 2 units) that allows you to connect CPI series expansion boards while an active cooler (SC1148) is installed on the Raspberry Pi 5.

• Expansion Boards

A compact embedded PLC implementing CODESYS based on the Raspberry Pi module CM4 board computer.

Contec has been contributing to the development of industrial use of PCs since 1982, when it launched its interface boards necessary for building PC-based measurement and control systems, with the catchphrase "Bringing the Ease of PCs to FA." The company has continued to innovate and adapt to expanding buses and operating systems. In April 2021, it developed the "CPI Series," a HAT-sized board for signal input and output compatible with the Raspberry Pi, which is the global standard for board computers. This series leverages the high cost performance and customization capabilities of the Raspberry Pi for applications in the measurement and control field. The product is a compact embedded PLC based on our original board computer using the latest embedded module CM4 from Raspberry Pi, and it implements the world's most widely used software PLC, "CODESYS." Utilizing our extensive asset of peripherals for Raspberry Pi, including the "CPI Series," users can build various control applications using the IEC 61131-3 compliant world standard PLC language.

• PLC

Bringing the ease of Raspberry Pi to FA and measurement control! A HAT expansion board that supports up to 8 connections creates new possibilities for Raspberry Pi.

【What's Different Here! Contec's Raspberry Pi Solutions】 ● Independently extended HAT specifications, enabling stack connections of up to 8 units FA control and measurement control systems require numerous signal inputs and outputs. Contec has expanded the standard HAT (Hardware Attached on Top) specification, which typically allows only one connection, to support multi-tier connections. With our unique Board ID system, we enable stack connections of up to 8 units, catering to systems that require a large number of signal inputs and outputs. ● No waste of development assets, multi-platform compatibility If you want to partially replace a PC-based system with a Raspberry Pi-based one, or scale up a Raspberry Pi-based system to a PC-based one, Contec allows for migration with minimal program changes. Our integrated driver software absorbs the differences in hardware, ensuring high compatibility at the API level. 【Product Lineup】 ● RAS function expansion ● Digital input/output / Relay output ● Analog input/output ● Counter

• Expansion Boards
• Embedded Board Computers
• Embedded OS

Introducing the production process of a model railway controller that can be remotely operated via smartphone using a Raspberry Pi and Contec I/O board!

Using a Raspberry Pi makes it easy to implement electronics projects linked to the internet. This document explains the process of creating a "Raspberry Pi Model Train Controller" that can be operated from a smartphone's web browser, divided into Part 1 through Part 3. It covers how to turn the model train on and off from the Raspberry Pi, easy programming with Node-RED, noise countermeasures using Contec's highly reliable I/O board, all explained with photos. Additionally, it includes software implementation, operation from the dashboard, usage instructions, and a summary of automatic control for model trains at the end. We encourage you to read it. 【Products Used】 Expansion board to add 8-point/8-point opto-isolated digital input/output to Raspberry Pi - CPI-DIO-0808L *For more details, please refer to the PDF document or feel free to contact us.

• controller
• Expansion Boards
• Embedded Board Computers

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.