Notice of participation in the "37th Monozukuri World (Tokyo)" from July 9 (Wednesday) to July 11 (Friday), 2025.

Can be produced from a single piece. Its flexibility allows for weight reduction and miniaturization! A standard rubber heater that fits various shapes.

We would like to introduce the standard type "Silicone Rubber Heater" handled by OM Heater. Complex shapes such as round, triangular, trapezoidal, and perforated can be produced from a single piece at an affordable price and with a short delivery time. With a thickness of only 1.5mm, the heater has excellent thermal responsiveness. It is a flexible, thin surface heating element that can replace traditional metal heaters. 【Features】 - Complex shapes can be produced from a single piece at an affordable price and with a short delivery time. - The heater thickness is only 1.5mm, providing excellent thermal responsiveness (thickness can also be adjusted by layering sheets). - Fits various shapes of heated objects such as cylindrical and conical. - Usable from low temperatures up to 200°C. - Supports various voltage designs from low voltage to 100V, 200V, 240V, etc. *For more details, please refer to the PDF document or feel free to contact us.

• plastic

Silicone rubber heater that can be easily attached and detached with the power of magnets.

The "MG type" is a silicone rubber heater that is made with a magnet sheet (neodymium) on one side, allowing for easy installation and attachment for heating and insulation in any location where magnets can adhere. It is very easy to detach and reattach during maintenance or when aligning the heater's position. Please feel free to contact us if you have any requests. We will be exhibiting at the Tokyo Mechanical Element Technology Exhibition. 【Features】 - Complex shapes such as round, triangular, trapezoidal, and perforated can be produced from a single piece at an affordable price, with short delivery times. - With a thickness of only 1.5mm, it has excellent thermal responsiveness. - Thickness adjustment is possible by layering the sheets. - Fits various shapes of objects to be heated, such as cylindrical and conical shapes. - Surface heating elements usable from low temperatures up to 200°C, etc. *For more details, please download the PDF or contact us.

• Silicon Heater

Easily keep the can body warm and heat it up! A silicone rubber heater that can be used regardless of the season.

We have developed a "Silicone Rubber Heater for Drums" to facilitate the easy extraction of high-viscosity liquids and solidified materials. By heating adhesives, grease, asphalt, paint, wax, oil, and various resin materials inside the drum, it is possible to stabilize viscosity and reduce pump capacity. 【Features】 - The silicone rubber heater is fully bonded to a stainless steel plate, allowing it to fit directly on drums, pails, and 1-gallon cans, resulting in high thermal efficiency. - Temperature control is achieved by attaching a sensor to the surface of the heater, allowing for direct temperature management. - The silicone rubber heater and temperature controller are integrated, making it easy to handle. - The fastening hardware is a one-touch type, making installation very simple. *For more details, please download the PDF or contact us.

• Silicon Heater

Easy to attach and detach magnet sheet type! We propose suitable insulation and heating methods based on diverse experiences according to the application.

We would like to introduce our "Heater for Drum Cans (Magnet Type)." One side of the silicone rubber heater is made with a magnetic sheet, allowing for easy installation and attachment in any location where magnets can stick. It enables quick and easy detachment during maintenance or when aligning the heater's position. 【Features】 ■ Can be manufactured from a single piece, accommodating complex shapes and short delivery times. ■ Achieves low prices by reducing components such as zippers, hooks, and springs. ■ The heater thickness is only 1.5mm, providing excellent thermal responsiveness (thickness can also be adjusted by layering sheets). ■ Fits perfectly to any shape of non-heated objects, such as cylindrical or conical forms. *For more details, please refer to the PDF document or feel free to contact us.

• Silicon Heater

Wide-ranging support for situations requiring temperature regulation! Introducing PID control temperature controllers!

The "DigiThermo OT-9" is a temperature controller that allows for digital settings and digital display. It is a compact, high-performance PID-controlled temperature controller designed with consideration for heaters, capable of addressing a wide range of situations where temperature control is needed with just one unit. It has been made even more convenient with the addition of support for two types of sensors, a timer, an alarm, and communication functions. 【Features】 ■ Digital settings and digital display available ■ Compact, high-performance PID-controlled temperature controller designed with consideration for heaters ■ Added support for two types of sensors, a timer, an alarm, and communication functions ■ Capable of addressing a wide range of situations where temperature control is needed with just one unit *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.