Added 'Notch Filter 655nm' to standard inventory.

Craftsman's Point: Achieved optical properties with a periodically varying refractive index. Application: Expected applications in notable fields such as Raman spectroscopy.

We will achieve optical characteristics that have not been realized before by periodically changing the refractive index. Conventional optical filters (optical thin films) consist of alternating layers of high-refractive-index and low-refractive-index films, which exhibit specific optical properties. In contrast, notch filters (band-stop filters) are deposition products designed to periodically change the refractive index in the thickness direction. A characteristic feature is that no optically unnecessary ripple occurs outside the stopband. We can achieve optical characteristics that were not possible with previous optical thin film processing. (Do you have such challenges?) ■ Is it possible to reflect only around the wavelength of 532nm? ■ I would like the unnecessary parts to be unable to transmit optically. ■ Notch filter? Band-stop filter? Rugate filter? ■ I have heard that the measurement difficulty after deposition is high; can you accommodate this?

• Other optical parts
• Color camera
• Sensors

It is an optical filter that selectively transmits ultraviolet wavelengths (255 nm) while blocking light of other wavelengths (using a substrate from Gohsui Seiko Glass).

Applications in the ultraviolet region are on the rise. At Itsuki Seiko Glass, we have developed filter glass substrates in the IHU series that have a transmission limit wavelength in the ultraviolet range and improved weather resistance to ultraviolet light. Recently, we have successfully deposited dielectric multilayer films to create bandpass filters in the ultraviolet region, as shown in the chart (measured data). (Are you facing these challenges?) ■ I want to transmit only specific wavelengths using aspheric lenses or lens arrays. ■ Is it possible to achieve pinpoint transmission at the UV-C wavelength of 254 nm? ■ Given the limited substrates and deposition materials, is anti-reflective coating feasible? ■ I've heard that measurement difficulty after film deposition is high; can you accommodate this? ■ Is it true that controlling the thickness in the UV region is very challenging due to its thinness? Based on our achievements in visible light, we can achieve high transmission rates in the ultraviolet wavelength range by controlling the deposition process. Additionally, by leveraging our ability to mold aspheric lenses and lens arrays in combination with our deposition technology, we can propose new applications.

• Other optical parts
• Other semiconductor manufacturing equipment
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light of longer wavelengths.

The short pass filter selectively transmits light with wavelengths below a specific wavelength (800nm) while blocking light with longer wavelengths. This allows for effective handling of light in specific wavelength bands. (Do you have any of the following concerns?) ■ Is it possible to customize due to high wavelength dependence? ■ If light is incident at an angle, performance decreases; can it be controlled? ■ When blocking specific wavelengths, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

It is a mirror that reflects light of a specific wavelength and transmits light of other wavelengths.

【1】Are you facing any of these issues? ◆ Is it possible to maintain a uniform reflectance for multiple wavelengths? ◆ Is it manageable if the reflectance decreases at specific wavelengths? ◆ Is color reproducibility achievable? ◆ Is there no problem with the stability of optical performance due to temperature changes or variations in environmental conditions? ◆ Is it possible to ship parts with a special shape? 【2】What is a dichroic mirror? A dichroic mirror is a mirror that reflects light of specific wavelengths while allowing other wavelengths to pass through. It consists of multiple layers, each with different optical properties. This characteristic allows for the effective separation, combination, or blocking of light at different wavelengths. 【3】Features of dichroic mirrors - Spectral separation Dichroic mirrors are used for spectral separation by selecting and reflecting or transmitting light of specific wavelengths from incident light. For example, they are used in optical devices that extract and detect light of specific wavelengths. - Light filtering They are used as filters to selectively remove light of specific wavelengths. This allows for the removal of unwanted light, enabling only the desired wavelengths to pass through.

• Other optical parts
• Distance measuring device
• Sensors

It is an optical filter that selectively transmits light below a specific wavelength and blocks light with longer wavelengths.

The short pass filter selectively transmits light below a specific wavelength while blocking light of longer wavelengths. This allows for effective handling of light in a specific wavelength range. (Do you have any of the following concerns?) ■ Is it customizable due to its high wavelength dependence? ■ If light is incident at an angle, will performance decrease, and can it be controlled? ■ When blocking a specific wavelength, there may be a decrease in transmittance. ■ Can it cause chromatic aberration? ■ Is it difficult to control multiple wavelengths simultaneously?

• Other optical parts
• Color camera
• Sensors

A bandpass filter that achieves sharp rise and high transmittance in the visible light range (660nm). It is ideal for red laser diodes and LED applications.

Are you having trouble with something like this? - Is it possible to only allow a specific wavelength (633nm) to pass through? - I would like to expand the stop band because light other than the desired wavelength becomes noise. - Can you take into account the range of incident angles? - The shape is special; can it be shipped as a component? Optical bandpass filters are used in various optical applications and are essential for selectively extracting light of specific wavelengths. Passband: An optical bandpass filter allows a specific range of wavelengths to pass through. This range of wavelengths is called the passband and is typically defined by the center wavelength and the wavelength bandwidth. Wavelength selectivity: Optical bandpass filters can have very high wavelength selectivity, emphasizing light of specific wavelengths. This is important in many fields where precise wavelength selectivity is required. A 660nm bandpass filter, which selectively allows light in the specific wavelength range of 660nm to pass through, is commonly used in optical applications. This bandpass filter amplifies or allows light within the wavelength range around 660nm while blocking light of other wavelengths.

• Distance measuring device
• Image Processing Equipment
• Sensors

This is a bandpass filter that achieves a sharp rise and high transmittance in the infrared range (905nm). It is ideal for TOF sensors and LiDAR.

Are you facing any of these issues? - Is it possible to only transmit specific wavelengths in the infrared range? - I would like a bandpass filter suitable for TOF sensors. - I heard that the wavelength used in LiDAR is 905nm; can you create a film for that? - Since light other than the desired wavelength will cause noise, I would like to widen the stop band. - Given the range of incident angles, can this be taken into account? - Is it possible to mount this on AGVs or OHTs? The 905nm bandpass filter is a filter that transmits specific wavelengths by utilizing light interference through the deposition of dielectric films. Based on our proven results in visible light, we can achieve sharp wavelength separation and high transmission rates in the infrared range (905nm) by controlling the deposition process, making it ideal for photoelectric sensors (such as TOF sensors) that require delicate light. We have standard stock items available, so please consider them. https://www.e-coating.jp/stock/cat/filmtype/bandpassfilter/

• Distance measuring device
• Image Processing Equipment
• Sensors

The piCLASSIC Neo Inline is an air-driven vacuum pump based on COAX technology, ensuring powerful and reliable performance. Its inline design, with the exhaust direction on the opposite side of the vacuum port, allows for easy mounting to profiles and seamless integration with EOAT and robotic systems. Its modularity enables adaptability, flexible installation, and user-friendly maintenance, catering to the requirements of various applications. By optionally adding energy-saving features suitable for the degree of workpiece leakage, it achieves energy-efficient operation while maintaining desirable vacuum performance.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

We would like to introduce the '96 WJacket Tubes 1.0ml Type' handled by FCR and Bio Co., Ltd. This product is an autoclavable tube with a 2D code that is compatible with DMSO and liquid nitrogen vapor. The type with Rack ID allows you to use a reader that can read both the Tube ID and Rack ID simultaneously by simply scanning the 2D code for Rack ID on the bottom of the Rack. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor ■ Capacity: 1.0ml *For more details, please download the PDF or feel free to contact us.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.