Same Sky releases the RING series of ring-type hollow shaft encoders.

Eight new types of mechanical hollow shaft encoders have been added.

At Same Sky, we offer capacitive, optical, and mechanical rotary encoders, and this time we have added eight new models of mechanical hollow shaft encoders. Please check out our new encoder lineup with a resolution of 10 PPR to 20 PPR, featuring detents (click feel).

• encoder

A variety of peripheral components that can conveniently utilize the encoder potentiometer of Same Sky.

- Knob compatible with products featuring a Φ6mm shaft with a D-cut - AMT connection cable for connecting to AMT encoders - AMT programming module for connecting AMT encoders to a PC Product introduction page >> https://samesky.co.jp/SS-Products-MotionAccessories.html

• Resistors
• encoder

A new model that supports shafts from φ9 to 5/8 inches has been added to the RS-485 absolute encoder series.

We offer an absolute type of robust and high-precision capacitive AMT encoder that supports serial communication. This time, the AMT24 series has been newly introduced, compatible with shaft diameters of φ9mm to 5/8 inch, using RS-485.

• encoder

Affordable type 11 mechanical rotary encoder

A new product has been launched in the affordable mechanical encoder category. The RIC11 series, which is about 12mm square (Type 11) and comes with a push switch, offers options for through-hole and SMT. It allows for the selection of shaft lengths ranging from 10mm to 19.5mm (8 stages) and their shapes (D-cut/knurled). Additionally, there are two types of resolution available: 20 PPR/20 clicks and 15 PPR/30 clicks, making it suitable for a wide range of design requirements.

• encoder
• switch
• Other electronic parts

AMT series of robust and high-precision rotary encoders with unique capacitive technology.

Since the release of the first generation in 2006 by CUI Devices, the AMT series has built an excellent track record with high reliability and accuracy. It is more robust than optical encoders, resistant to various harsh conditions such as dust, dirt, and oil, and has far superior resistance to vibration and extreme temperatures. Additionally, it does not use LEDs, resulting in a longer lifespan, smaller size, and lower current consumption (6-18mA). It is robust like magnetic encoders, unaffected by magnetic interference or EMC noise, while achieving higher precision and resolution. Moreover, due to its digital nature, users can flexibly change the encoder's resolution. In capacitive encoders, the resolution can be set programmatically, which not only helps optimize the system when designing PID control loops but also allows one model to be used across multiple applications, reducing inventory holding. For BLDC motors, it enables the digital setting of index pulses and alignment, and the diagnostic features included in CUI's GUI software allow users to quickly troubleshoot on-site.

• encoder
• Other electronic parts
• Servo

In a civil engineering site material yard, not only is material storage conducted, but also the frequent movement of trucks and heavy machinery, unloading, and the movement of workers. On unpaved ground, mud and ruts can occur due to rain, which may reduce work efficiency. Hyper CLT mats are civil engineering CLT materials that utilize wood CLT. By laying them in material yards or storage areas, a work space that facilitates the movement of vehicles and heavy machinery can be established while protecting the ground. They can be laid only in necessary locations, and relocation or repurposing in accordance with construction progress is also possible. The 5×10 panel weighs approximately 230 kg, and the 5×20 panel weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery. After use, they can also be utilized as temporary roads, access routes, or heavy machinery work yards. Additionally, they offer unique benefits of wood, such as glare reduction, noise suppression, and CO2 fixation. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these wooden mats can also be used for environmental improvement in material yards and innovative public works.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.

Features: ●CPU: Intel Core Processor (Series 3) ●Onboard Memory: Onboard LPDDR5 (up to 48GB) ●Onboard Storage: Onboard UFS (up to 256GB) ●LAN: 2.5GbE ×2 (Intel Ethernet Controller I226-IT) ●USB: USB 3.2 Type-A ×2, USB 3.2 Gen 2x2 Type-C ×1 ●GPIO: 40-pin GPIO ×1 ●Video Output: HDMI 2.1 (TMDS) ×2, DP 1.4a (via USB Type-C) ●Serial Port: RS-232/422/485 (10-pin header) ×2 ●Expansion Slots: M.2 2230 E-Key ×1, M.2 2280 M-Key ×1, M.2 2242 M-Key ×1 ●Security: TPM 2.0 ●Power Input: DC 12–24V input

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 48GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (Intel Ethernet Controller I226-IT): 2 ports ● USB 3.2 Type-A: 2 ports ● USB 3.2 Gen 2x2 Type-C: 1 port ● 40-pin GPIO: 1 port ● HDMI 2.1 (TMDS): 2 ports ● DisplayPort 1.4a: via USB Type-C ×1 ● RS-232/422/485 serial ports: 2 ports ● M.2 2230 E-Key: 1 slot ● M.2 2280 M-Key: 1 slot ● M.2 2242 M-Key: 1 slot ● Equipped with TPM 2.0 (Trusted Platform Module) ● Input power: DC 12–24V * This is a model without an operating system.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repair without the application of heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.