Achieves stable operation with low moisture content and accommodates a wide range of sludge with its unique mechanism. 【Screw Press Dehydrator "SH Type"】

Streamlining the dissolution process. Eliminating variations in concentration by operators. Three models to choose from based on the capacity of the dissolution tank.

The "YEL Series" is a device that automates the dissolution process of liquid high molecular coagulants used for sludge treatment. It reduces the workload and eliminates variations in concentration caused by the operator. It is simple to handle and can be installed compactly. The capacity of the dissolution tank is available in three options: 100L, 200L, and 300L. 【Features】 ■ Standard equipped with a raw liquid tank ■ Continuous use of coagulants is possible ■ Three models available to choose from according to the capacity of the dissolution tank *Product information can be viewed via "PDF Download." In addition to this, we offer various water treatment devices, including dewatering machines. Please feel free to contact us for more details.

• Other physicochemical equipment

Introducing a new screw press dewatering machine that pursues energy efficiency and maintainability!

The "NS-C type" is a high-efficiency screw press dewatering machine that can handle a wide range of concentrations from low to high. Thanks to its high filling efficiency, it achieves a high processing capacity while being compact. The significant reduction in auxiliary equipment leads to decreased power consumption and greatly lowers the risk of equipment failure. Compared to the conventional "NS type," it has been designed to save space, making it suitable for locations where installation was previously difficult. 【Features】 ■ Significantly increased processing capacity (compared to conventional models) ■ Energy-saving ■ Low maintenance ■ Space-saving *For more details, please refer to the PDF document or feel free to contact us.

• Wastewater/wastewater treatment equipment

Introduction of dewatering machine products and optional products! We also provide an overview of various coagulants and dewatering machine selection.

This catalog introduces sludge dewatering machines and environmental equipment. It features the "CS type dewatering machine," a single cloth type dewatering machine, as well as optional products like "filters" and an overview of dewatering machine selection. Please make use of this for your product selection. [Contents (excerpt)] ■Dewatering machine product introduction ・Single cloth type dewatering machine ・Belt press type dewatering machine ・Screw press type dewatering machine ・Dewatering vehicle *For more details, please refer to the PDF document or feel free to contact us.

• Wastewater/wastewater treatment equipment

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● GbE RJ-45 x 2 ● USB 3.2 Type-A x 3 ● DP 1.2 / HDMI 2.0b / eDP 1.3 ● RS232/422/485 x 2 ● M.2 2230 E-Key x 1 (PCIe x1, USB2.0 x1) ● M.2 2280 M-Key x 1 (PCIe x2) ● TPM 2.0 ● 12V DC input ● Operating temperature of 0℃ to 60℃ (AC adapter supports 0 to 40℃) * This model does not come with an OS.

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● 1 GbE LAN x 1 ● HDMI 1.4b x 1 ● USB 3.2 Gen 2 (Type-A) x 3 ● 12V DC input ● TPM 2.0 ● M.2 2230 E-Key (PCIe[x1], USB2.0 x 1) ● GPIO x 8, COM x 1 ● Operating temperature of the main unit: -20℃ to 60℃ (AC adapter supports 0 to 40℃) * This model does not come with an OS.

Features: ● Equipped with Intel Processor N150 ● Onboard memory LPDDR5 8GB ● Onboard storage eMMC 64GB ● 1 GbE LAN x 1 ● HDMI 1.4b x 1 ● USB 3.2 Gen 2 (Type-A) x 3 ● 12V DC input ● TPM 2.0 ● Operating temperature of the main unit: -20℃ to 70℃ (AC adapter supports 0 to 40℃) * This model does not include an operating system.

In civil engineering, there are many situations where temporary roads, workspaces for heavy machinery, access routes, and pedestrian walkways use ground boards. Traditional steel plates are common, but they are heavy and pose challenges in terms of transportation, installation, and removal. Therefore, the "Hyper CLT Ground Board," which utilizes wooden CLT, has garnered attention as a lightweight alternative. The Hyper CLT Ground Board weighs approximately 230 kg for a 5×10 panel and about 460 kg for a 5×20 panel. It is easier to handle compared to steel plates and can be installed easily even with small machinery. It contributes to labor-saving in civil engineering sites by improving efficiency in transportation, reducing movement work on-site, and shortening construction time. Its ease of use in narrow sites or locations where large machinery is difficult to access is a notable feature. Additionally, since it is made of wood, it helps reduce heat reflection in summer, lowers noise levels, and promotes environmental considerations. It can be used for a wide range of applications, including temporary roads, material storage areas, heavy machinery scaffolding, and pedestrian pathways, making it an effective proposal material for creativity and safety measures in public works. The Hyper CLT Ground Board is registered with the Ministry of Land, Infrastructure, Transport and Tourism under the NETIS technology "TH-250021-A." It is recommended as a new alternative to steel plates for sites looking for lightweight ground boards and civil engineering materials. It is also suitable for consideration of introduction.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.