[Webinar Series on Medical Device Safety Standards from the Basics 2025] Session 2: Electromagnetic Interference/EMC Testing for Medical Electrical Equipment (IEC 60601-1-2)

We will explain an overview of IEC 60601-1-2, including electromagnetic interference testing and changes from the 4th edition to the 4.1 edition.

[Webinar Series on Medical Device Safety Standards from the Basics 2025] Session 2: Electromagnetic Interference/EMC Testing of Medical Electrical Equipment (IEC 60601-1-2) March 25, 2025 | Free | Online Technical standards for medical devices are complex and varied, including the IEC 60601-1 series and individual standards from the IEC 60601-2 series. In recent years, revisions to EMC standards have been made, and the transition period to the JIS standard JIS T 0601-1-2:2023 is approaching in mid-February 2026. In this webinar, as part of the introductory series on medical device safety standards for 2025, we will provide an overview of IEC 60601-1-2, explain electromagnetic interference testing, and discuss changes from the 4th edition to the 4.1 edition. Additionally, we will introduce some testing methods for basic standards that were requested in last year's survey. For more details and to register, please follow the link below.

• EMC Testing
• Public Testing/Laboratory
• Other Testing Contract

Manufacturers need to demonstrate compliance with regulations regarding safety and performance requirements to ensure product safety and market entry.

Medical device manufacturers need to demonstrate compliance with numerous regulations regarding electromagnetic compatibility (EMC), wireless performance, radio frequency (RF) exposure, and other safety and performance requirements to ensure product safety and market entry. UL Solutions provides comprehensive support and guidance from design concept to product completion, helping to avoid potential issues and reduce time to market.

• EMC Testing
• Contract measurement
• Public Testing/Laboratory

One-stop service for on-site measurements, requests, and compliance with radio laws in various countries.

UL Solutions supports a wide range of products, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices. Our specialists, based on proven results and experience, provide meticulous support not only for testing but also for certification acquisition. 【Features】 - Wide range of products supported, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices - Support for both testing and certification acquisition - Testing laboratory operates based on the ISO/IEC 17025 standard - Support for overseas expansion 【Benefits of Using UL Solutions】 The UL Solutions EMC testing laboratory is accredited by the U.S. NVLAP, the Japan Accreditation Board (JAB), and A2LA, based on the operational standard ISO/IEC 17025. We meet various requests for a wide range of products, from IT/AV equipment to wireless devices, automotive/construction machinery, and medical devices, including compliance with general EMC standards and radio wave regulations in various countries. Specialists with iNARTE (EMC technical qualification) provide meticulous support tailored to each customer's needs. *For more details, please refer to the PDF document or feel free to contact us.

• EMC Testing
• Contract measurement
• Public Testing/Laboratory

Providing solutions for the global market.

UL Solutions provides evaluation testing and certification in accordance with product safety standards and EMC standards, biocompatibility testing, reprocessing validation, packaging validation, and ISO 13485 audit registration services to manufacturers of medical devices, in vitro diagnostic medical devices, laboratory equipment, and testing/measurement equipment.

• Other contract services

Compliance with IEC 60601, IEC 61010, and various individual standards.

Our company is one of the NRTLs (Nationally Recognized Testing Laboratories) recognized by the U.S. OSHA, and we are also a CB accredited testing laboratory certified by IECEE in the fields of medical electrical equipment and in vitro diagnostic medical devices. Additionally, we are an ILAC accredited testing laboratory registered with the International Accreditation Service, Inc. (USA). The evaluation reports and certifications we provide can be used for medical device and in vitro diagnostic medical device regulatory submissions in various countries.

• Contract Inspection

We will be exhibiting at the J AGRI (J Agri) / Agricultural Materials EXPO held at Gran Messe Kumamoto from May 22 (Wednesday) to May 24 (Friday), 2024. 【Booth Number】: B1-43 Outdoor Exhibition Area Japan's largest comprehensive exhibition for agriculture and livestock, Agricultural WEEK, will be renamed J AGRI starting in 2024. This is a place where you can actually see, touch, and compare products. At our booth, we will showcase our lightweight resin flooring boards "JULIGHT / SUPER JULIGHT / RAKURAKUBAN" along with new products. Starting with the agricultural-specific flooring board "RAKURAKUBAN," which can be easily laid in various scenes such as around greenhouses, agricultural work sites, temporary parking lots, for the movement of agricultural machinery and light trucks, and for protecting truck beds, there are various ways to use the lightweight resin flooring boards "JULIGHT / SUPER JULIGHT series." We offer a variety of sizes and protrusion shapes tailored to customer needs, and they are lightweight enough to be carried by hand, with excellent impact resistance, as well as superior water resistance, weather resistance, and durability, providing outstanding features not found in plywood or steel plates. We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

We would like to inform you that we will be exhibiting our products at the 25th Annual Meeting of the Japanese Society for Protein Science. If you plan to attend, please feel free to stop by. ❚ 25th Annual Meeting of the Japanese Society for Protein Science Date: June 18 (Tuesday) - June 20 (Thursday), 2025 Venue: Acurie Himeji Exhibition Booth: For details, please visit the official website of the Japanese Society for Protein Science. URL: https://aeplan.jp/pssj2025/ ❚ Products to be Exhibited - Transporter Measurement Device | SURFE2R N1 This device allows for label-free and real-time direct measurement of transporter currents without using fluorescent probes or radiolabeled ligands. - Artificial Lipid Bilayer Experimental Device | Orbit mini This device simplifies the challenging tasks of forming lipid membranes, reconstructing membrane proteins, and measuring single-channel currents in experiments using artificial lipid bilayers, all with just a micropipette. - Liposome Preparation Device | Vesicle Prep Pro This single device enables easy preparation of liposomes without hassle, accommodating various lipid conditions (such as DPhPC, DPPC, DOPC, etc.).

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X