We have added 'UV transmission filters' to our standard inventory.

It achieves excellent ultraviolet transmission rates and can be adapted to the light sources you plan to use (such as high-pressure mercury lamps, various laser lights, UV LEDs, etc.).

Are you facing any of these issues? - I want to reduce reflection in the ultraviolet (UV-A) range. - I want to increase the transmittance at wavelengths that react with initiators, such as 365nm and 405nm. - I've heard that the UV range has a thin film thickness and is difficult to control... - I've heard that the substrates and film materials are limited; can you accommodate that? - I've heard that the measurement difficulty after film formation is high; can you handle that? ◆ We achieve excellent ultraviolet transmittance! By depositing multilayer dielectric films, we prevent light reflection from both sides of the substrate. Based on our achievements in visible light, we can also achieve high transmittance in the ultraviolet wavelength range by controlling the film formation process. However, the substrates that can be used for film formation are limited, so prior confirmation is necessary. By utilizing the characteristics of the substrates you will use and designing accordingly, we will realize the optimal filter.

• LED Module
• Ultraviolet irradiation equipment
• Sensors

It is an optical thin-film filter that reduces the reflectance at specific wavelengths and improves transmittance. By increasing the amount of light, it contributes to energy saving and power reduction.

Light reflects at the boundary surface with air, causing 4% reflection on one side and 8% reflection on both sides of the glass, resulting in a reflection of one's own image. An anti-reflective coating (AR = Anti Reflection Coating) is an optical thin film that utilizes the principle of interference by alternately depositing dielectrics with different refractive indices, reducing the reflectance of specific wavelengths and improving transmittance. Are you facing any of these issues? - Want to reduce reflections and ghosting in window materials? - Is there a way to improve visibility and achieve clearer image quality? - Looking to reduce internal reflections and prevent flare? - Want to increase light levels to contribute to energy savings? - Can we design an anti-reflective coating (AR) that takes the angle of incidence into account?

• Other optical parts
• lens
• Sensors

Standard stock items include anti-reflective films, bandpass filters (BPF filters), and infrared cut filters (IR cut filters), among others.

We will start selling some optical thin film products (optical filter products) and patterned processing products as "standard stock items." We have responded to such requests! ◆ It's difficult to bear the cost of a whole batch when only a few pieces are needed for experiments... ◆ I want to see product development and performance tests quickly, so I need a few pieces at different levels... ◆ I just want to try it out for now... We often hear such voices through inquiries from our website. Even if custom-made filters are ultimately needed, I believe it is very difficult to define complete filter performance from the beginning.

• mirror
• Distance measuring device
• Sensors

We would like to introduce MotionCatch as a monitoring sensor that can be used to understand office occupancy. Using millimeter-wave radar and AI, it non-contactly detects human movement and occupancy status. Since it does not use a camera and does not record images, it can be considered for installation in places where cameras are difficult to place, such as conference rooms, private rooms, and work areas. 【Suitable for the following situations】 - Understanding whether conference rooms are actually in use - Monitoring occupancy and absence in private rooms and work areas - Checking if absences are prolonged It can be installed on walls or ceilings and has a design that easily blends into existing spaces. Product materials and a comparison table of monitoring sensors can be downloaded from the related catalog below. We also welcome inquiries regarding the conditions for rooms where installation is possible and the number of units, so please feel free to contact us.

One of the major strengths of the Hyper CLT sheet is that it is a technology registered with the Ministry of Land, Infrastructure, Transport and Tourism's NETIS. The NETIS registration number is **"TH-250021-A."** In public works, it is important to explain to the client "why we are introducing it" and "what effects we expect" when adopting new materials. If it is a NETIS registered technology, it becomes easier to connect it to proposals for the utilization of new technologies and creative ideas. The Hyper CLT sheet is a civil engineering sheet that utilizes wood CLT. It is lightweight and easy to install and remove, and it has characteristics unique to wood, such as reducing summer heat reflection and noise, and fixing CO2. It is important to be able to propose it not just as "wooden sheets," but as a civil engineering technology registered with NETIS. The Hyper CLT sheet, which combines wood, NETIS, civil engineering, and CLT, is a new temporary material that makes it easier to clearly demonstrate the reasons for its introduction in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

The applications of Hyper CLT sheets are not limited to specific locations. Essentially, many civil engineering sites that have previously used steel plates are candidates for consideration. Wood CLT can be utilized in various places such as temporary roads, access routes, heavy machinery work yards, material yards, storage areas, temporary parking lots, and worker pathways. Of course, there are cases where steel plates are more suitable depending on site conditions, such as in areas with heavy loads or where heavy machinery needs to turn. The important thing is not to replace everything, but to use them appropriately according to the ground conditions, machinery, and intended use. Hyper CLT sheets are lightweight, easy to install and remove, and have unique characteristics of wood, such as reducing glare and metallic sounds, and fixing CO2. Furthermore, it is a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism NETIS "TH-250021-A."** By utilizing wood, NETIS, civil engineering, and CLT, it provides a new option for places that have previously used steel plates.

Event Date: October 7 (Wednesday) to October 9 (Friday), 2026 Time: 10:00 AM to 5:00 PM Venue: Intex Osaka Our company will be exhibiting at the 29th Monozukuri World Design and Manufacturing Solutions Exhibition, which will be held at Intex Osaka from October 7 (Wednesday) to October 9 (Friday), 2026. At the venue, we will showcase the upgraded "ReMacs Hybrid," as well as the eagerly awaited production management system for the precast concrete industry, "ReMacs TypePca," which will be unveiled for the first time following its release at the end of May! We will also display various solutions, including the newly equipped "AI Drawing Search System" with OCR functionality! We sincerely look forward to your visit.