[Exhibition Information] PI Japan will exhibit at "OPIE'25".

Single-sided and double-sided, upright and low-profile, high-precision alignment routine.

A high-speed, high-precision photonics alignment system that combines a hexapod 6-axis motor stage with an XYZ-axis piezo stage. Optimized scan/alignment routines for SiPh wafers, photonic devices, PICs, and optical fibers, along with powerful array alignment algorithms, enable fast, high-precision, and simultaneous alignment. The hexapod operates with DC servo motor drive across 6 axes, allowing sub-micron positioning. Additionally, it allows for arbitrary setting of the rotation center to accommodate various devices. The XYZ-axis piezo stage enables nano-level positioning and allows for high-speed response and scanning at high resonance frequencies. Comprehensive and deep software support for rapid process development, including support for common languages such as C#, Python, LabVIEW, and MATLAB on Windows and Linux. *For more details, please download the PDF or contact us.*

• Optical Experimental Parts
• Actuator
• Other industrial robots

The maximum travel range is 813mm! With the adoption of a circulating ball bearing, it can withstand up to 450N.

The "L/V-412, L/V-417" is a PIMag high-load linear stage that improves tracking performance due to the high resolution of the encoder. Tracking errors are reduced, and settling time is shortened. For maximum flexibility, you can choose between incremental and absolute encoders. 【Features】 ■ Maximum travel range: 813mm ■ Rated force: 87N ■ Choice of incremental/absolute encoder ■ Can withstand up to 450N due to the use of circulating ball bearings ■ Dust prevention with the use of a cover strap *For more details, please refer to the PDF document or feel free to contact us.

• Linear motor

Zero wear with air levitation and linear motor. Maximum speed 2m/s, sensor resolution 1nm.

The PIglide IS A-311 is an air-bearing XY planar scanner that levitates the stage drive surface using air. With a flat structure thinner than stacked types, it achieves a compact device design while operating over a wide scanning range of 300 mm × 400 mm and a sensor resolution of 1 nm. The frictionless linear motor drive contributes to a high-speed response of up to 2 m/s and a load capacity of 147 N, aiding in reducing cycle times for laser processing and semiconductor wafer inspection. Its dust-free structure is suitable for clean rooms, and a rich array of controllers/APIs facilitates the integration of XY synchronization and area scanning. For more details, please download the PDF or contact us.

• encoder
• Other machine elements
• Cartesian Robot

Compact XY-axis stage with 22mm motion driven by piezo motor, self-locking for position holding.

The U-723 is a PILine XY stage that maintains the mechanical stability of the stage position through a self-locking drive when powered off. Power consumption and heat generation are significantly reduced. These characteristics are advantageous for applications with a small duty cycle, battery operation, or sensitivity to heat. The position of the axis is measured by an encoder, and a optical reference switch enables reliable and reproducible motion. 【Features】 ■ High-speed positioning in two axes ■ Lightweight and space-saving ■ High guide accuracy ■ Sensor resolution of 10nm ■ Self-locking in standby, no heat generation during standby ■ Low noise operation *For more details, please refer to the PDF document or feel free to contact us.

• Piezoelectric Devices
• Actuator
• Linear motor

3000 N pressing force / 700 N pulling force, 90 µm movement with sub-nanometer resolution, µs response.

The P-844/P-845, which features a PICMA® multi-layer stack housed in a preloaded metal case, is a high-load piezo actuator that operates with a maximum stroke of 90 µm at sub-nanometer precision, enabling a maximum pushing force of 3000 N and a pulling force of 700 N. The P-845 type includes a built-in strain gauge sensor (SGS) that directly measures and provides feedback on the piezo movement, minimizing hysteresis and drift. The P-844 is the version without a sensor. *For more details, please download the PDF or contact us.*

• Piezoelectric Devices
• Solenoid Actuators
• Actuator

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

When it rains, problems at construction sites such as muddy access roads, rough ground conditions, and reduced mobility of heavy machinery and vehicles increase significantly. One solution that can be utilized even in rainy conditions is the wooden lightweight mat "Hyper CLT Mat," made from CLT (Cross Laminated Timber). By laying it down on temporary roads, access routes, heavy machinery work yards, and material storage areas, it reduces the area where vehicles run directly on the ground, serving as a countermeasure against mud and muck. The 5×10 panel weighs about 230 kg, making it relatively light and easy to install, remove, or relocate in accordance with the progress of construction. Furthermore, it can be proposed for use in public works as a new technology registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." The wooden lightweight mat, combining wood, NETIS, civil engineering, and CLT, is an option that supports the footing of sites where conditions can change easily due to weather.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.